• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.811-818
• /
• 2011

Though an excavator is classified as an equipment utilizing a shovel in earthworks, it has been frequently used in lifting work. In this view, lifting capacity is classified as the main functions of the excavator. Thus, its accurate functions need to be provided. However, in domestic conditions, the necessity for the functions of lifting capacity are not perceived. This study shows 1) Many researches about lifting-work of excavators abroad are used as basic data necessary for domestic introduction. 2) For domestic excavators without the information of lifting-work, methodologies of lifting-work available are suggested and reviewed. 3)Lifting zones are divided into safety and caution lifting zones. The information on lifting capacity and lifting zones will be able to used as objective and substantive bases to operational planning and safety management.

• Journal of the Ergonomics Society of Korea
• /
• v.18 no.2
• /
• pp.1-9
• /
• 1999

The objective of this study was to make comparison of the physical work capacities(PWCs) for three different types of tasks. For this purpose, an ergometer exercise, a treadmill exercise, and lifting activities with four different frequencies (2, 5, 8, 11 lifts/min) for the lifting range from floor to 76cm were considered. Oxygen consumption rates and heart rates were measured during the exercises and lifting activities. The PWC values for ergometer exercise test was $2562.71ml-O_2/min$ and the one for treadmill exercise was $2874.89ml-O_2/min$. The value of lifting PWC increased from $1774.07ml-O_2/min$ to $2296.76ml-O_2/min$ as the lifting frequency increased from 2 to 11 lifts/min. The ratio of the lifting PWCs to the ergometer PWC increased from 69.36% to 89.77% as the lifting frequency increased. To the treadmill PWC, the ratio increased from 62.21% to 85.24% as the lifting frequency increased. From this result, it appears that the PWCs based on the lifting tasks rather than PWCs by ergometer or treadmill exercise should be considered to determine the physiological criterion for safe weights for lifting tasks. Therefore, the physiological criteria of the NIOSH Guideline should be reexamined.

• Industrial Engineering and Management Systems
• /
• v.7 no.1
• /
• pp.90-98
• /
• 2008

This research selects the lifting task to be the main subject. Four experiments were designed to measure which among lifting postures, lifting heights, waist-belt, and breathing control significantly influences intra-abdominal pressure (Gallagher, 1991; Lavender, Andersson and Natarajan, 1999). The experimental results were taken to be the recommendations of the manual materials handling work design. The research findings reveal that the symmetrical stoop posture is the most significant to the intra-abdominal pressure within all lifting postures. When the lifting height is increased, the intra-abdominal pressure produced relatively goes up. Also, the combination of symmetrical stoop posture, waist-belt use, and inspiration and holding at the same time is the most efficient in carrying out lifting tasks. Simultaneously, the research discovers that for any posture, the volume of the intra-abdominal pressure is much bigger when using the waist-belt compared to when it is not used. Therefore, the waist-belt design for the lifting works might be the future research approach.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.11-22
• /
• 2006

The muscular-skeletal disorders(MSDs) that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. Eight male college students were recruited as participants. Three different lifting frequencies(1, 3, 5 lifts/min) and three twisting angles(including the sagittal plane and two asymmetric angles; i.e., 0°, 45°, 90°) for symmetric and asymmetric tasks, respectively, with three lifting range from floor to knuckle height, knuckle to shoulder, floor to shoulder height for one hour's work shift using free style lifting technique were studied. The maximum acceptable weight of load(MAWL) was determined under the different task conditions, and the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWLs. The results showed that: (1) The MAWLs were significantly decreased as the task frequency and task angle increased.; (2) The heart rate, oxygen consumption, RPE significantly increased with an increase in lifting frequency although maximum acceptable weight of lift decreased.; (3) The highest heart rate and oxygen consumption was recorded at the lifting range of floor to shoulder, followed by floor to knuckle and knuckle to shoulder.; (4) The RPE value showed that subjects perceived more exertion at the high frequency rate of lifting task and lifting range of floor to shoulder height. (5) The modeling for MAWL using isometric strength, task angle and lifting frequency were developed. It is expected that use of the results provided in this study may prove helpful in reducing MMH hazards, especially from lifting tasks for Korean, and can be used as a basis for pre-employment screening.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.3
• /
• pp.284-289
• /
• 2006

In 2003, Korean government made the 11 scopes of overburdened work[Ministry of Labor(MOL), Notification No. 2003-24] to prevent musculoskeletal disorders(MSDs). MOL Notification was established based on 'Washington Administrative Code 296-62-051, Ergonomics'. When initially investigating the contents, the labor unions and the specialists pointed out the possibility of devaluation on risk factors of MSDs. The present study aimed to compare the result of the NIOSH revised lifting equation(NLE) analysis with the MOL Notification(No.8, 9, 10) on manual lifting tasks. A study sample of 568 manual lifting tasks (automobile parts, foods, and tire manufacture) were evaluated for this study. All 502 tasks exceed lifting index(LI) of 1.0, but 276 tasks(55.0%) out of 502 tasks were evaluated non-over burdened work for musculoskeletal system by the MOL Notification. Particularly, 47 tasks(30.9%), in spite of exceeding LI of 3.0, were evaluated non-over burdened work. This study has shown the possibility of devaluation on risk factors of MSDs, when evaluated by MOL Notification. Therefore, it will be necessary to repeal or complement the scope of over-burdened work(MOL Notification) to prevent musculoskeletal disorders.

• Journal of Biosystems Engineering
• /
• v.35 no.5
• /
• pp.357-365
• /
• 2010

Workers in the agricultural industry have been exposed to many work-related musculoskeletal disorders. So, our objectives in this study were to measure and analyze worker's physiological bio-information to reduce musculoskeletal disorders in relation to agricultural works. We investigated worker's bio-information of physiological signals during the repeated lifting work such as body temperature, heart rate, blood pressure, physical activity, and heart rate variability. Moreover, we analyzed the workloads of lumbar spine during the repeated lifting work using the 3-axis acceleration and angular velocity sensors. The changes of body temperature was not significant, but the mean heart rate increased from 90/min to 116/min significantly during 30 min of repeated lifting work (p<0.05). The average worker's physical activity(energy consumption rate) was 206 kcal/70kg/h during the repeated lifting work. The workers' acute stress index was more than 80, which indicated a stressful work. Also, the maximum shear force on the disk (L5/S1) of a worker's lumbar spine in static state was 500N, and the maximum inertia moment was 139 $N{\cdot}m$ in dynamic state.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.89-93
• /
• 2009

The muscular-skeletal disorders that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. This study used the psychophysical approach to determine the maximum acceptable weight(MAWL) for seven young male subjects, and used isometric and isoinertial strength variables as predictors to develop prediction models. Also, the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWL. Three different lifting frequencies(1, 3, 5lifts/min) with two lifting range from floor to knuckle height and knuckle to shoulder height for one hour's work shift using free style lifting technique were studied. These results may not only provide scientific data in establishing the safety standards for Korean workers' lifting tasks, but also contribute preventing the rapidly increasing muscular-skeletal disorders lately on the industrial site.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.286-294
• /
• 1997

The objective of this study was to make comparison of the physical work capacities(PWCs) for three different types of tasks. For this purpose, an ergometer exercise, a treadmill exercise, and lifting activities with four different frequencies (2, 5, 8, 11 lifts/min) for the lifting range from floor to 76cm were considered. Oxygen consumption rates and heart rates were measured during the exercises and lifting activities. The PWC values for ergometer exercise test was 2562.71 ml-O$_{2}$/min and the one for treadmill exercise was 2874.89 ml-0$_{2}$/min. The value of lifting PWC increased from 1774.07ml-0$_{2}$/min to 2296.76 ml-0$_{2}$/min as the lifting frequency increased from 2 to 11 lifts/min. The ratio of the lifting PWCs to the ergometer PWCs increased from 69.36% to 89.77% as the lifting frequency increased. To the treadmill PWCs, the ratio increased from 62.21% to 85.24% as the lifting frequency increased. From this result, it is appears that the PWCs based on the lifting tasks rather than PWCs by ergometer or treadmill exercise should be considered to determine the physiological criterion for safe weights for lifting tasks. Therefore, the physiological criteria of the NIOSH Guideline should be reexamined.

• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.163-170
• /
• 2013

Purpose: The purpose of this study is to provide analysis of physiological, biomechanical responses occurring from the operation to lifting or twist lifting task appears frequently in agricultural work. Methods: This study investigated the changes of physiological factors such as heart rate, heart rate variability (HRV) and biomechanical factors such as physical activity and kinetic analysis in the task of twisting at the waist while lifting. Results: Heart rates changed significantly with the workload. The result indicated that the workload of 2 kg was light intensity work, and the workload of 12 kg was hard intensity work. Physical activity increased as the workload increased both on wrist and waist. Besides, stress index of the worker increased with the workload. Dynamic load to herniated discs was analyzed using inertial sensor, and the angular acceleration and torque increased with the workload. The proposed measurement system can measure the recipient's physiological and physical signals in real-time and analyzed 3-dimensionally according to the variety of work load. Conclusions: The system we propose will be a new method to measure agricultural workers' multi-dimensional signals and analyze various farming tasks.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.291-292
• /
• 2021

In modular construction, it is insufficient for safety management of workers, and workers are still exposed to the risk of accidents due to work at high places for lifting and assembly work in modular construction sites. Therefore, it is necessary when preventive safety management through risk management of workers on modular construction sites. This study is a basic study for the risk assessment(checklist) of modular construction, and the purpose of this study is to analyze the risk factors of the module lifting work at the modular construction site. It is intended to identify the hazard risk factors and improvement measures of the existing lifting operation, by analyzing the case of the risk assessment of the existing RC method, and to identify the risk factors for each work process when lifting the module. In the future, the results of this study are expected to be utilized in the development of checklists for risk assessment as safety management plan for modular construction sites.