• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.811-818
• /
• 2011

Though an excavator is classified as an equipment utilizing a shovel in earthworks, it has been frequently used in lifting work. In this view, lifting capacity is classified as the main functions of the excavator. Thus, its accurate functions need to be provided. However, in domestic conditions, the necessity for the functions of lifting capacity are not perceived. This study shows 1) Many researches about lifting-work of excavators abroad are used as basic data necessary for domestic introduction. 2) For domestic excavators without the information of lifting-work, methodologies of lifting-work available are suggested and reviewed. 3)Lifting zones are divided into safety and caution lifting zones. The information on lifting capacity and lifting zones will be able to used as objective and substantive bases to operational planning and safety management.

• Journal of the Ergonomics Society of Korea
• /
• v.18 no.2
• /
• pp.1-9
• /
• 1999

The objective of this study was to make comparison of the physical work capacities(PWCs) for three different types of tasks. For this purpose, an ergometer exercise, a treadmill exercise, and lifting activities with four different frequencies (2, 5, 8, 11 lifts/min) for the lifting range from floor to 76cm were considered. Oxygen consumption rates and heart rates were measured during the exercises and lifting activities. The PWC values for ergometer exercise test was $2562.71ml-O_2/min$ and the one for treadmill exercise was $2874.89ml-O_2/min$. The value of lifting PWC increased from $1774.07ml-O_2/min$ to $2296.76ml-O_2/min$ as the lifting frequency increased from 2 to 11 lifts/min. The ratio of the lifting PWCs to the ergometer PWC increased from 69.36% to 89.77% as the lifting frequency increased. To the treadmill PWC, the ratio increased from 62.21% to 85.24% as the lifting frequency increased. From this result, it appears that the PWCs based on the lifting tasks rather than PWCs by ergometer or treadmill exercise should be considered to determine the physiological criterion for safe weights for lifting tasks. Therefore, the physiological criteria of the NIOSH Guideline should be reexamined.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.286-294
• /
• 1997

The objective of this study was to make comparison of the physical work capacities(PWCs) for three different types of tasks. For this purpose, an ergometer exercise, a treadmill exercise, and lifting activities with four different frequencies (2, 5, 8, 11 lifts/min) for the lifting range from floor to 76cm were considered. Oxygen consumption rates and heart rates were measured during the exercises and lifting activities. The PWC values for ergometer exercise test was 2562.71 ml-O$_{2}$/min and the one for treadmill exercise was 2874.89 ml-0$_{2}$/min. The value of lifting PWC increased from 1774.07ml-0$_{2}$/min to 2296.76 ml-0$_{2}$/min as the lifting frequency increased from 2 to 11 lifts/min. The ratio of the lifting PWCs to the ergometer PWCs increased from 69.36% to 89.77% as the lifting frequency increased. To the treadmill PWCs, the ratio increased from 62.21% to 85.24% as the lifting frequency increased. From this result, it is appears that the PWCs based on the lifting tasks rather than PWCs by ergometer or treadmill exercise should be considered to determine the physiological criterion for safe weights for lifting tasks. Therefore, the physiological criteria of the NIOSH Guideline should be reexamined.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.42 no.3
• /
• pp.1-12
• /
• 2017

In this paper, we generalize lifted inequalities to a 0-1 mixed-integer bilinear covering set with linear terms. This work is motivated by the observation that Generalized Bilinear Inequality (GBI) occurs in the Branch and Bound process. We find some conditions and prove the subadditivity of lifting functions for lifting to be sequence-independent. Using the theoretical results, we develop facet-defining inequalities for a GBI-defined set through three steps of lifting.

• Bulletin of the Korean Mathematical Society
• /
• v.46 no.6
• /
• pp.1069-1077
• /
• 2009

In 1984, Oshiro [11] has studied the decomposition of continuous lifting modules. He obtained the following: every continuous lifting module has an indecomposable decomposition. In this paper, we study extending lifting modules. We show that every extending lifting module has an indecomposable decomposition. This result is an expansion of Oshiro's result mentioned above. And we consider some application of this result.

• Industrial Engineering and Management Systems
• /
• v.7 no.1
• /
• pp.90-98
• /
• 2008

This research selects the lifting task to be the main subject. Four experiments were designed to measure which among lifting postures, lifting heights, waist-belt, and breathing control significantly influences intra-abdominal pressure (Gallagher, 1991; Lavender, Andersson and Natarajan, 1999). The experimental results were taken to be the recommendations of the manual materials handling work design. The research findings reveal that the symmetrical stoop posture is the most significant to the intra-abdominal pressure within all lifting postures. When the lifting height is increased, the intra-abdominal pressure produced relatively goes up. Also, the combination of symmetrical stoop posture, waist-belt use, and inspiration and holding at the same time is the most efficient in carrying out lifting tasks. Simultaneously, the research discovers that for any posture, the volume of the intra-abdominal pressure is much bigger when using the waist-belt compared to when it is not used. Therefore, the waist-belt design for the lifting works might be the future research approach.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.4
• /
• pp.95-102
• /
• 2021

PURPOSE: This study examined the muscle activity of the abdominal muscle when lifting with abdominal hollowing with visual feedback and lifting with a pelvic compression belt. This study suggests how to lift an object safely in the workplace for people who bend their backs repeatedly. METHODS: The study was conducted on healthy men in their 20s and 30s. When lifting a 7kg object, lifting with abdominal hollowing with visual feedback, and lifting an object with a pelvic compression belt were performed three times in random order. The muscle activities were measured rectus abdominis (RA), external oblique (EO), internal oblique/transverse abdominis (IO/TrA) muscles, and abdominal hollowing exercises, and box lifting exercises were carried out in advance before the experiment. One-way ANOVA was used to compare muscle activities, and a Tukey HSD was used for post-analysis. The level of significance was set to .05. RESULTS: According to the study, there was no significant difference in muscle activity of the RA muscle depending on the lifting method (p > .05). There were significant differences between the EO and IO/TrA muscle (p < .05). The IO/TrA muscle activity showed the largest increase in lifting an abdominal hollowing with visual feedback (p < .05). The EO muscle activity increased in pelvic compression belt lifting (p < .05). The muscle activity was increased in RA, but there was no significant difference (p < .05). CONCLUSION: Abdominal hollowing lifting with visual feedback increases the muscle activity of the IO/TrA muscle, which is higher than normal, and affects the core stability of the body.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.4
• /
• pp.7-11
• /
• 2011

The installation phase for a topside module suggested can be divided into 9 stages, which include start, pre-lifting, lifting, lifted, rotating, positioning, lowering, mating, and end of installation. The transfer of the topside module from a transport barge to a crane vessel takes place in the first three stages, from start to lifting, while the transfer of the module onto a floating spar hull occurs in the last three stages, from lowering to the end. The coupled multi-body motions are calculated in both calm water and in irregular waves with significant wave height (1.52m), with suggested force equilibrium diagrams. The effects of the hydrodynamic interactions between the crane vessel and barge during the lifting stage have been considered. The internal forces caused by the load transfer and ballasting are derived for the lifting phases. The results of these internal forces for the calm water condition are compared with those in the irregular sea condition. Although the effect of pitch motion on the relative vertical motion between the deck of the floating structure and the topside module is significant in the lifting phases, the internal force induced pitch motion is too small to show its influence. However, the effect of the internal force on the wave-induced heave responses in the lifting phases is noticeable in the irregular sea condition because the transfer mass-induced draught changes in the floating structure are observed to have higher amplitudes than the external force induced responses.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.145-146
• /
• 2011

Lifting plan in conjunction with the overall construction plan will be established. It is being created by executive director of the Corporation and other such as an experienced site manager. But, written lifting plan based on the limited information and experience is causing some problems such as decreasing productivity, workability loss, delay. The reasons for the problems are lack of prediction of construction execution, inappropriate materials on the past performance, individual experience, limits of knowledge, lack of technical materials, shortage of advisor. Therefore, to solve the problems, we have to overcome the situation in which we depends on lifting planner's experience and intuition, limited information by accumulating objective and reliable materials. Because unorganized lifting plan will lower efficiency of lifting equipment and make reducing construction period difficult. In this study, influence factors on lifting plans will be derived through reviewing literatures and lifting plan cases. Derived influence factors will be classified as components and classes, classified influence factors are assessed suitability. Also, Decision making items are derived from the factors. Finally, tower crane lifting plan process will be suggested from the result.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.1
• /
• pp.145-153
• /
• 2010

Activity of lifting has been a major issue in many research area related in manual materials handling tasks. However, the opposite activity of lifting, lowering, has received much less attention. It is known that 52% of all box-handling tasks were lowering in nature. The difference in stress between lifting and lowering activity is not well understood. A simple assumption that these two activities are very similar has been established and widely used. However, this simple assumption may be questionable. The objective of this study was to compare a lifting activity and a lowering activity based on the three different ergonomic approaches; (1) biomechanical, (2) physiological, (3) psychophysical approach. It was found that the stress of lowering activity was from 65% to 93%, from 87% to 97%, and from 87% to 96% according to the biomechanical, physiological, and psychophysical point of view, respectively. It is concluded from the result of this study that the stress of lowering activity is lower than that of the lifting activity. The maximum compressive force on the lumbro-sacral joint (L5/S1) was 158% and 108% respectively, for lifting and lowering activity of which the work load is the 58% of Action Limit. It is suggested that the NIOSH AL and RWL and biomechanical criteria should be reconsidered especially for the low frequency of lifting activities.