• International Journal of Precision Engineering and Manufacturing
• /
• 제8권3호
• /
• pp.45-49
• /
• 2007

A gearing system emits inconsistent noises from the impact of gear teeth when defects are present, but it is not easy for a noise inspector on a production line to distinguish defective products objectively. Since customers constantly complain about various noises from geared motors, it is desirable to devise an analytical technique to classify motors. However, it is difficult to separate inconsistent noises due to defective gears from the overall noise produced by a geared motor using a general signal processing method such as a FFT because low frequency impulse signals have a tendency not to appear in the frequency domain. In this paper, we propose a method that can be used to obtain more objective estimates and measurements of inconsistent noises from a gearing system. The proposed method makes use of the cepstrum domain with an applied autocorrelation and comb lifter, followed by a domain inversion.

• 한국음향학회지
• /
• 제6권4호
• /
• pp.44-54
• /
• 1987

본 논문은 화자독립 고립단어 인식에 있어서 LP모델의 문제점과 그 해결 방안으로서 cepstrum영역에 있어서 lifter를 이용한 해결에 대해서 고찰하였다. 한편, 각 인식 단어의 기준 패턴을 구하기 위한 방법으로서 집단화의 방법에 대해 논하였다. 집단화의 방법으로서는 UWA방법과 K-iteration방법을 변형시킨 KMA 방법을 제시 비교하였다. 인식실험결과 정현파 lifter와 KMA의 집단화 방법을 사용하였을 때 $95\%$의 최고 인식률을 보였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.51-54
• /
• 2013

Rotary kiln reactors are frequently equipped with an axial burner with which solid burden material is directly heated. Lifters are commonly used along the length of the system to lift particulate solids and increase the heat transfer between the solid bed and the combustion gas. The material cascading from the lifters undergoes drying and reacting through direct contact with the gas stream. In this study, volume distribution of materials held within lifters was modeled according to the different lifter configuration and appropriate configuration was used for the design purpose. This was applied to the one-dimensional heat balance model of a counter-current flow reactor, which contributes to the increase of the effective contact surface, and thereby enhances the heat transfer.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1987년도 학술발표회 논문집
• /
• pp.70-74
• /
• 1987

본 논문은 화자독립 고립단어 인식에 있어서 LP 모델의 문제점과 그 해결 방안으로서 cepstrum 영역에 있어서 lifter를 이용한 해결에 대해서 고찰하였다. 한편, 각 인식 단어의 기준 패턴을 구하기 위한 방법으로서 집단화의 방법에 대해 논하였다. 집단화의 방법으로서는 UWA 방법과 K-iteration 방법을 변형시킨 KMA 방법을 제시 비교하였다. 인식 실험결과 정현파 lifter와 KMA의 집단화 방법을 사용하였을 때 95%의 최고 인식률을 보였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.562-565
• /
• 2000

For solving problems of manpower and improving working environment, Robot System have been introduced. In the past, Robot System was adopted mass production, indoor factory condition, but present Robot System is applied to many other fields. This applied field is Robot System was adopted fruit harvest, maintenance, and so on. The developed Multi-Linked Lifter is applied to eminant multi-purpose working. The purpose of this study is to develop control algorithm for this equipment composed of multi-linked manipulator.

• 한국분말재료학회지
• /
• 제10권6호
• /
• pp.415-421
• /
• 2003

The study for producing the flake powders by milling of aluminum foil and gas atomized powders was carried out. The effects of lifter bars on the ball motions and milling of aluminum foils were also investigated. The aluminum foils were laminated each other, elongated, fragmented into small foils and finally formed into the flake powders during the dry ball-milling. The spherical atomized-powders were milled to coarse flake powders with high aspect ratio and then changed to fine flake powders with lower aspect ratio. Even though long times were required for making flake powders by milling of foils, the water covering areas of them were higher than those of powders milled using gas-atomized powders, suggesting aluminum foils were more plastically deformed by micro-forging. On the other hand, as the number of lifter bars increased, the necessary rotation speeds of milling jar for cascading mode and cataracting mode decreased drastically. It was possible to achieve same quality of milled flake powder by using the lifter bars under the lower milling speeds. The painting test showed that the appearance of painted surface was good and optimum content range of aluminum paste in car paint to maximize the degree of gloss was 3-5%.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권3호
• /
• pp.122-128
• /
• 2002

In this paper, a robust pattern classification of breath sounds for the diagnosis of pulmonary dysfunction in noise environment is proposed. The feature parameter extraction method by highpass lifter algorithm and PM(projection measure) algorithm are used. 17 different groups of breath sounds are experimentally classified and investigated. The classification has been performed by 6 different types of combinations with proposed methods to evaluate the performances, such as ARC with EDM and LCC with EDM, WLCC with EDM, ARC with PM, LCC with PM, WLCC with PM. Furthermore, all feature parameters are extracted to 80th orders by 5th orders step, and all experiments are evaluated in increasing noise environments by degrees SNR 24dB to 0dB. As a results, WLCC which is derived from highpass lifter algorithm, is selected for the feature parameter extraction method. Pm is more robust than EDM in noisy environments to test and compare experimental results. WLCC with PM method(WLCC/PM) has a better performance in an increasing noise environment for diagnosis of pulmonary dysfunction.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.139-145
• /
• 2007

The motion of single-rod cylinder is typically controlled by the directional control valve. In some case, the hydraulic system should be energized by the man power and at the same time the motion of a cylinder is controlled manually. It may be confusing for a man to do two things at the same time. The solution is to make up the closed hydraulic circuit with the bi-directional pump and single-rod cylinder without using a directional control valve. In the case of single-rod cylinder, the flows at the rod side and head side are so different that several valves should be installed to make the motion of single-rod cylinder possible. The hydraulic system is composed of a bi-directional pump, a single-rod cylinder, pilot operated check valves, a check valve and a counter balance valve for the purpose of actuating the lifter. The characteristics of a suggested system are analysized mathematically and numerically.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2002년도 춘계학술대회 논문집
• /
• pp.57-61
• /
• 2002

현대는 고령화시대에 진입하면서 노약자와 장애인의 이동권과 접근권이 문제로 대두되고 있다. 본 연구에서는 기존 전동횔체어를 점진적으로 대체하고 있는 전동스쿠터를 승용차에 실어 장거리 여행시 발생되는 접근성을 향상하는데 중요한 역할을 하는 리프트를 제작하는 과정에서 발생되는 안전성과 편리성을 중심으로 리프트의 동특성을 분석하고자 한다. 동특성에는 승용차 뒤칸의 좁은 공간을 고려한 궤적분석을 통한 간섭점검과 각 부위의 스트레스해석을 통한 기구부의 안전도를 확보하고자 한다. 이 설계기술은 노약자 및 장애인의 이동권과 접근권을 향상시킬 수 있는 전동스쿠터의 대량생산체제를 확보하기 위한 중요한 기초자료가 됨으로써 동 제품의 안전도와 정밀도 품질보증 확보에 큰 기여를 하게 된다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1998년도 추계연구발표회 논문개요집
• /
• pp.114-115
• /
• 1998