• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.399-402
• /
• 2007

In the previous research, it has been found that water strider's legs are strongly water repellent due to hierarchical structure of hydrophobic setae on the legs. Here we propose an answer why they should be so hydrophobic by showing that the work required to remove a floating hydrophobic cylinder from an interface depends very sensitively on the contact angle of the cylinder: superhydrophobic cylinders require relatively little work to remove them from an interface. Also we experimentally study the work required to lift a leg out of water with different contact angles and compare our experimental results with a theoretical prediction.

• Journal of the Korean Society of Combustion
• /
• v.14 no.1
• /
• pp.1-8
• /
• 2009

Experiment is conducted to grasp effects of flame curvature on flame behavior in laminar lifted-jet flames. Nozzle diameters of 0.1 and 1.0mm are used to vary flame curvature of edge flame. There exist three types of edge flame oscillation. These edge flame oscillations may be caused by radial heat loss at all flame conditions, by fuel Lewis numbers near or larger than unity with the help of appreciable radial conduction heat loss, and by buoyancy effects. These are confirmed by the analysis of oscillation frequencies. It is however seen that the change of lift-off height through edge-flame oscillation is mainly due to radial heat loss irrespective of Lewis number and buoyancy.

• Journal of the Korean Society of Combustion
• /
• v.16 no.4
• /
• pp.31-37
• /
• 2011

This paper presents both experimental and numerical investigation of the combustion characteristics of stretched premixed lift-off flames using synthetic gas($H_2$/CO) in an impinging burner. We used "Spin code" for numerical analysis. An ICCD camera was employed to measure flame location and flame thickness. The impinging surface temperature was affected by local strain rate K, equivalence ratio, and composition ratio of fuel. In spite of the difference of boundary conditions in experimental and numerical results, the tendencies of surface temperatures were agreed. From result of this work, we also found that flame location and flame thickness directly related to surface temperature are greatly affected by local strain rate K.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.90-93
• /
• 2007

밀도가 높고 주기적으로 배열된 실리콘 나노점이 실리콘 기판위에 형성 되었다. 실리콘 나노점을 형성하기 위해 사용된 나노패턴의 지름은 20 나노미터(nm)이고 깊이는 40 nm 이었으며 기공과 기공사이의 거리는 50 nm 였다. 나노미터 크기의 패턴을 형성시키기 위해서 자기조립물질을 사용했으며 폴리스티렌(PS) 바탕에 벌집형태로 평행하게 배열된 실린더 모양의 폴리메틸메타아크릴레이트(PMMA)의 구조를 형성하였다 폴리메틸메타아크릴레이트를 아세트산으로 제거하여 폴리스티렌만 남아있는 나노크기의 마스크를 만들었다. 형성된 나노패턴에 전자빔 기상증착장치를 사용하여 금 박막을 $100\;{\AA}$ 증착하고 리프트오프(lift-off) 방식으로 금 나노점을 만들었다. 형성된 금 나노점을 불소기반의 화학반응성 식각법을 이용하여 식각하고 황산으로 제거하였다. 형성된 실리콘 나노점의 지름은 24 nm 였고 높이는 20 nm 였다.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.192-192
• /
• 2006

Organic/organic and organic/inorganic multilayer films composed of organic polyelectrolytes (PE) and inorganic nanoparticles/platelets were prepared from the layer-by-layer (LbL) deposition using both spinning and dipping. The difference in both LbL methods is quantitatively compared in terms of internal layer ordering and physical properties of the multilayered films. Additionally, we suggest that the patterned multilayer films can be easily prepared by the combination of the spin SA and the lift-off method. Freestanding films were also prepared with the LbL deposition on low energy substrates, which allows the detailed analysis of composition within the films. Other LbL thin films prepared with block copolymer micelles will be discussed.

• ETRI Journal
• /
• v.29 no.6
• /
• pp.814-816
• /
• 2007

Conventional lithography methods of gold patterning are based on deposition and lift-off or deposition and etching. In this letter, we demonstrate a novel method of gold patterning using spin-coatable gold electron-beam resist which is functionalized gold nanocrystals with amine ligands. Amine-stabilized gold electron beam resist exhibits good sensitivity, 3.0 mC/$cm^2$, compared to that of thiol-stabilized gold electron beam resists. The proposed method reduces the number of processing steps and provides greater freedom in the patterning of complex nanostructures.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1830-1835
• /
• 2005

It is important to estimate the distribution of intensity of a magnetic field for application of magnetic method to industrial nondestructive evaluation. Magnetic camera provides the distribution of a quantitative magnetic field with homogeneous lift-off and same spatial resolution. And it is possible to interpret the distribution of the magnetic field when the dipole model is introduced. This study introduces the numerical and experimental considering of the quantitative evaluation of several size and shapes of the cracks using the magnetic field images of the scan type magnetic camera.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.53-58
• /
• 1996

In this paper, a simple fabrication technique of an air-bridge for interconnection of isolated electrodes of microwave active and passive devices and MMIC's is proposed. The proposed air-bridge proceses are mainly combinations of thermal evaporation, positive photoresist and image reversal processes for easy lift-off of up to 2.0 .mu.m thick metal. According to the resutls of air-birdge processes, it is confirmed that air-gap and thickness of theair-bridge are about 3.5.mu.m, and 2.0.mu.m, respectively. And it is also possible to make the fine air-bridge with widths of 5~60.mu.m and post-intervals of 25~200.mu.m withot collapse. finally, GaAs power MESFET's and rectangular spiral inductors are fabricatd and measured in order to confirm of feasibility of the proposed air-bridge processes. The MAG of the fabricated power MESFET's is 10dB at 10GHz, and the inductance of the (200.mu. * 6 turns) rectangular spiral inductors 4.5 nH inX-band.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.3
• /
• pp.106-111
• /
• 2001

The freestanding GaN substrates were grown by hydride vapor phase epitaxy (HVPE) on (0001) sapphire substrate and prepared by using laser induced lift-off. After a mechanical polishing on both Ga and N-surfaces of GaN films with 100$\mu\textrm{m}$ thick, their polarities have been investigated by using chemical etching in phosphoric acid solution, 3 dimensional surface profiler and Auger electron spectroscopy (AES). The composition of the GaN film measured by AES indicted that Ga and N terminated surfaces have the different N/Ga peak ratio of 0.74 and 0.97, respectively. Ga-face and N-face of GaN revealed quite different chemical properties: the polar surfaces corresponding to (0001) plane are resistant to a phosphoric acid etching whereas N-polar surfaces corresponding to(0001) are chemically active.

• Journal of Mechanical Science and Technology
• /
• v.16 no.5
• /
• pp.591-598
• /
• 2002

Leakage magnetic flux is occurred in the cracked area of magnetized specimens, and also it changes the magnetic domain area of the magneto-optical film positioned on the specimen. It causes the change of the optical permeability of the magnetic domain on the crack area. So crack images can be obtained easily using this principle. On the other hand, utilizing a laser in this method makes possible to perform a remote sensing by detecting the light intensity contrast between cracked area and normal area. This paper shows the application of non-destructive inspection system taking advantage of magneto-optical method for micro-cracks and presents examples applied to the several types of specimens having fatigue cracks and fabricated cracks using this method. Also the authors prove the possibility of this method as a remote sensing system under the oscillation load considering application to real fields.