• 한국환경복원기술학회지
• /
• 제13권1호
• /
• pp.93-102
• /
• 2010

Greening sometimes fails because its method is not suitable for various site conditions, therefore the trend of selecting a revegetation method in Korea today is through test construction. However, due to enlargement, complication and diversification of domestic construction businesses, the importance of VE is gradually increasing as effective efforts over a whole life-cycle to obtain goals such as quality improvement and cost reduction, and not only quality and economic efficiency but also substantiality need to be considered in comparing revegetation methods. For this study, Sungnam~Janghowon (area1), where comparatively various slope revegetation methods are used, was selected the investigation site. The site was divided into three areas:blasting rock, ripping rock and earth sand. The revegetation methods used were six in the blasting rock area, five in the ripping rock area, and two in the earth sand region. 2007 monitoring data was analyzed, and Value (V) was calculated with LCC related ratio, and compared and contrasted with the evaluation of prior revegetation methods. Therefore it is believed that this analysis enables selection of the most appropriate method, unbiased towards one particular characteristic such as quality, vegetation growth and economy. When aiming for a durable effect, it shall be more efficient to select the most appropriate method focusing on LCC analysis, which deals with the economic aspect, as well as the design function aspect.

• 한국멀티미디어학회논문지
• /
• 제14권12호
• /
• pp.1613-1620
• /
• 2011

Roof structure of the traditional buildings in the Northeast Asia region including Korea contains the most complicated and crucial components of the building and therefore the issues such as cost down, productivity and the attempt to combine the traditional building methodology with contemporary building technology turn out to be vital to the survival of the old yet disconnected traditional building industry. One of the distinctive modern building technologies is handling life-cycle building information by constructing virtual buildings using BIM, building information modeling tools. In this paper we follow a procedure to implement some of the design modules to be applied in BIM tools which are platforms for constructing virtual building models. We focus on Gong-po components namely the bracket-sets which are the essential part that connects the middle parts to the top parts (the roof structure) which are considered to be the most elaborate parts of the traditional buildings. The target building to work with in this paper is the Sung-Rye-Moon which has special cultural and social meanings nowadays and we tested our understanding and the design modules such as the bracket-sets by constructing a virtual building model of Sung-Rye-Moon.

• 한국IT서비스학회지
• /
• 제8권2호
• /
• pp.229-245
• /
• 2009

The Korean mobile telecommunication service market is faced with a tremendous competitive period, in which the market is entering into the maturity stage with launching of the 3rd generation service and with introduction of mobile number portability. In general, it is more important to sustain the old customers than to attracting new customers, as the life cycle of an industry is entering the maturity stage in which the growth rate of new customers is decreasing gradually or becoming stagnant. Thus, mobile telecommunication business has to seek a way to maintain the existing customers instead of promoting new customers. So this study investigates whether the service quality of mobile telecommunication could have effects on the switching barrier of the industry. In order to test the hypothesis on the effects of service quality of mobile telecommunication in Korea on switching barrier, this study collected the questionnaire response data of students including middle and high school students and undergraduates, who are regarded as the major customers in that mobile telecommunication industry.

• KIEAE Journal
• /
• 제15권3호
• /
• pp.57-63
• /
• 2015

Purpose: Ground source heat pump system has been attracted in the horticulture industry for the reduction of energy costs and the increasing of farm income. Even though it has higher initial costs, if it uses in combination with heat storage, it is able to reduce the initial costs and operate efficiently. In order to have significant effect of heat storage type ground source heat pump system, it is required to design the capacity considering various conditions such as energy load pattern and operating schedule. Method: In this study, we have designed heat storage type ground source heat pump system in 5 cases by the operating schedule, and examined the system to find the most economic and having superb performance regarding the system COP(Coefficient of Performance) and energy consumption, using dynamic energy simulation, TRNSYS 17. Result: Conventional ground source heat pump system has lower energy consumption than heat storage type, but following the result of LCC(Life Cycle Cost) analysis, the heat storage type was more economic due to the initial costs. In addition, it has the most efficient performance and energy costs in the case of the smallest heat storage time.

• 설비공학논문집
• /
• 제17권1호
• /
• pp.16-24
• /
• 2005

The goal of the present paper is to show the optimum design and operation conditions on 6 kW solar water heating system by using computer simulation with verified modelling. As the object functions, we took not only the amount of acquired and auxiliary heat but LCC, which has a relative importance and decisive role in economy. As expected, the maximum heat is acquired at the slope of collector with the equal degree to the latitude, facing the south. The capacity increase of the circulation pump and the storage tank lead to the increase of acquired heat and the decrease of auxiliary heat, but do not necessarily give economical advantages owing to additional electrical power consumption. In the present system, the minimum LCC can be obtained at the storage tank volume of 450 L and the mass flow rate of 0.344 kg/s.

• 한국CDE학회논문집
• /
• 제11권2호
• /
• pp.77-87
• /
• 2006

It is necessary to change the existing design process to cope with a short life-cycle product and various customer's demands. Also a frequent design change may delay the whole design process and it will increase the unit cost of the production. New alternatives or techniques have emerged to solve the existing design problems, such as a knowledge based engineering, an intelligent CAD, a function based design, and so on. In this paper, we propose a hybrid design system with a knowledge based design methodology and a function based design technique. The knowledge based design is good at a frequent design change and the function based design is effective to extract a core design behavior. In an early design process, the system utilizes a core design behavior through the function based design process. On the other hand, the system manages complicated design issues with the knowledge based design technique in the detailed design process. We conclude that the hybrid design system can bring fair effects on implementing an efficient design environment in aspect of time and expense.

• Carbon letters
• /
• 제25권
• /
• pp.103-112
• /
• 2018

Hierarchically porous, chemically activated carbon materials are readily derived from biomass using hydrothermal carbonization (HTC) and chemical activation processes. In this study, empty fruit bunches (EFB) were chosen as the carbon source due to their sustainability, high lignin-content, abundance, and low cost. The lignin content in the EFB was condensed and carbonized into a bulk non-porous solid via the HTC process, and then transformed into a hierarchical porous structure consisting of macro- and micropores by chemical activation. As confirmed by various characterization results, the optimum activation temperature for supercapacitor applications was determined to be $700^{\circ}C$. The enhanced capacitive performance is attributed to the textural property of the extremely high specific surface area of $2861.4m^2\;g^{-1}$. The prepared material exhibited hierarchical porosity and surface features with oxygen functionalities, such as carboxyl and hydroxyl groups, suitable for pseudocapacitance. Finally, the as-optimized nanoporous carbons exhibited remarkable capacitive performance, with a specific capacitance of $402.3F\;g^{-1}$ at $0.5A\;g^{-1}$, a good rate capability of 79.8% at current densities from $0.5A\;g^{-1}$ to $10A\;g^{-1}$, and excellent life cycle behavior of 10,000 cycles with 96.5% capacitance retention at $20A\;g^{-1}$.

• 한국건설관리학회논문집
• /
• 제2권4호
• /
• pp.39-47
• /
• 2001

오늘날 각 산업에서 발생되는 정보의 양은 막대하다. 이러한 정보들은 정보기술의 발달로 인해 비용/시간적인 측면에서 효과적인 성과를 얻고 있다. 그러나, 국내 건설산업에서는 그러하지 못한 실정이다. 건설 프로세스 상에서 발생하는 수많은 정보들을 착용하는데 있어, 단지 일회성이라는 건설산업의 특수성으로 인해 다양한 정보들 또한 한번 활용될 뿐, 재활용되지 못하고 있는 실정이다. 건설공사 프로젝트 라이프 사이클 상에서 특히 발생하는 정보의 양과 중요도가 다른 단계에서 보다 높다는 전에서 현장에서 활용되는 시공정보들을 활용키 위한 방안에 관한 연구가 필요하다. 따라서 현장정보관리를 위한 분류체계를 중심으로 시공정보들을 활용하기 위한 모델을 제시하고자 한다.

• Journal of Construction Engineering and Project Management
• /
• 제3권3호
• /
• pp.23-34
• /
• 2013

As climate change and environmental pollution become one of the biggest global issues today, new renewable energy, especially solar photovoltaic (PV) system, is getting great attention as a sustainable energy source. However, initial investment cost of PV system is considerable, and thus, it is crucial to predict electricity generation accurately before installation of the system. This study analyzes the loss ratio of solar photovoltaic electricity generation from the actual PV system monitoring data to predict electricity generation more accurately in advance. This study is carried out with the following five steps: (i) Data collection of actual electricity generation from PV system and the related information; (ii) Calculation of simulation-based electricity generation; (iii) Comparative analysis between actual electricity generation and simulation-based electricity generation based on the seasonality; (iv) Stochastic approach by defining probability distribution of loss ratio between actual electricity generation and simulation-based electricity generation ; and (v) Case study by conducting Monte-Carlo Simulation (MCS) based on the probability distribution function of loss ratio. The results of this study could be used (i) to estimate electricity generation from PV system more accurately before installation of the system, (ii) to establish the optimal maintenance strategy for the different application fields and the different season, and (iii) to conduct feasibility study on investment at the level of life cycle.

• 한국군사과학기술학회지
• /
• 제18권6호
• /
• pp.721-727
• /
• 2015

The improvement of the reliability of weapon systems and the reduction of the total life-cycle cost based on the improving of the DT&E system for Company Organized weapon systems research and development are urgently required. The major advanced countries operate test and evaluation centers for military (U.S.), manage a large scale organization of IPT personnel (England) or conduct management of DT&E through a third party organization (France). Based on a survey of experts, an improvement of the DT&E policy in terms of reliability and objectiveness is needed, and management through a third party national defense agency and civilian agency such as the Surion development case is required. In addition, although it appears that efficiency improves when management of DT&E is performed by national defence agencies rather than civilian agencies, it is necessary to proceed by selecting a civilian agency based on competition in the case that it is difficult to select a national defence agency.