• Asian-Australasian Journal of Animal Sciences
• /
• 제18권6호
• /
• pp.787-794
• /
• 2005

The aim of this study was 1) to confirm the practical efficiency of a routine milk P4 monitoring system for postpartum reproductive management of a dairy herd, and 2) to evaluate the relationship between the blood metabolic profiles, milk quality and body weight of individual cows in the farm records, which may reflect the postpartum nutritional condition, and the time of postpartum resumption of ovarian activity of dairy cows. A total of 116 Holstein cows was used in the present study. First, during the period of Experiment 1, postpartum reproductive management based on weekly measured milk P4 concentration from individual cows was conducted. Compared with the reproductive records of the past two years without P4 monitoring, although the day from calving to first AI did not change, both the number of AI until pregnant (with P4; 1.9 times vs. without P4; 2.9 times) and the days open (with P4; 95.1 days vs. without P4; 135.8 days and 133.8 days) were significantly decreased. In Experiment 2, the measurement of blood constituents such as albumin, blood urea nitrogen, packed cell volume, ammonia, glucose, total cholesterol, non-esterified, AST and $\gamma$-GTP was performed on the blood samples taken once approximately 14 days postpartum, to monitor both health and nutritional conditions. The milk constituent parameters, such as milk protein (MP), milk fat (MF), SNF and lactose, collected from the monthly progeny test of individual cows, were used to monitor the postpartum nutritional status. Furthermore, the data obtained from the routine measurements of body weight were used to calculate the rate of peripartum body weight loss. The resumption day of the postpartum estrous cycle was assumed from the milk P4 profiles of individual cows. There was no clear relationship between each parameter from blood examination and those from resumption time. However, the cows had low values of MP, and SNF, which significantly affected the resumption of the postpartum estrous cycle. Similarly, a higher rate of body weight loss indicated a significant delay (more than 1 month) in the resumption of the postpartum estrous cycle, compared with the groups that had a medium or lower rate of body weight loss. The results of the present study demonstrated that the implementation of routine milk P4 monitoring-based postpartum reproductive management, together with milk quality parameters and routine BW data available in field conditions may be utilized as a practical approach for increasing the postpartum reproductive efficiency of a high yielding dairy herd.

• Annals of Occupational and Environmental Medicine
• /
• 제35권
• /
• pp.2.1-2.15
• /
• 2023

Background: Phthalates are endocrine disrupting chemicals that are widely used in the production of items of daily life such as in polyvinylchloride plastics, insecticides, and medical devices. This study aimed to determine the association between phthalate exposure and shellfish consumption using data from the Korean National Environmental Health Survey (KoNEHS) cycle 3 (2015-2017), which is a nationally representative survey. Methods: In this study, we analyzed the KoNEHS cycle 3 data of 3,333 (1,526 men and 1,807 women) adults aged more than 19 years. Data related to the variables of sociodemographic factors, health-related behaviors, dietary factors, seafood consumption frequency, and urinary phthalate metabolites concentrations were collected. The concentrations of urinary phthalate metabolites of all the participants were divided into quartiles to define high and low concentration groups based on the 75th percentile concentration. A χ² test was conducted to analyze the distribution of independent variables. To analyze the relationship between shellfish consumption and phthalate exposure, the odds ratios (ORs) were calculated using logistic regression analysis. Results: Total adults with shellfish consumption frequency of over once a week showed the following adjusted ORs for high concentrations of the following metabolites compared with the group that consumed shellfish once a week or less: 1.43 (95% confidence interval [CI]: 1.01-2.06) for mono-(2-ethyl-5-oxohexyl) phthalate (MEOHP), 1.43 (95% CI: 1.01-2.03) for mono-(2-ethyl-5-carboxypentyl) phthalate (MECPP), 1.57 (95% CI: 1.10-2.24) for ∑di-2-ethylhexyl phthalate (∑DEHP), 2.01 (95% CI: 1.46-2.77) for mono-carboxyoctyl phthalate (MCOP), 1.56 (95% CI: 1.11-2.18) for mono-carboxy-isononly phthalate (MCNP), and 2.57 (95% CI: 1.85-3.56) for mono (3-carboxypropyl) phthalate (MCPP). Conclusions: The concentrations of urinary phthalate metabolites (MEOHP, MECPP, ∑DEHP, MCOP, MCNP, and MCPP) were higher in adults with a higher frequency of shellfish consumption.

• 한국수정란이식학회지
• /
• 제24권4호
• /
• pp.289-292
• /
• 2009

Mongolia has 80% livestock of total agriculture industry, 170,000 farms are engaged, 2,500,000 of cows that were beef and dairy cows are raised. Despite of Mongolian has great application with milk, there are not clear differences between cow and dairy cattle, and the production of milk is also low. But the milk suppliers are varied (horse, sheep, goat, etc), so that the total milk production is 500 thousand ton per year. It's really considerable to improve the breed of owing to many problems with big differences among milk qualities. For carrying out for first year project, artificial insemination project was operated with 3rd grade Holstein semen that were imported from S. Korea, and initiation and field training were also carried out through appropriate AI technique we developed for Mongolia environment. Local information research and MOU conclusion were done with professor D. Altangerel in May $10^{th}{\sim}13^{th}$, 2009, and development for AI technique and AI equipments were supplied for Mongolia breeding and natural environment in July $10^{th}{\sim}17^{th}$ in 2009. All cows were treated by synchronization for AI. To do this, $PGF_{2\alpha}$ injection were treated for luteal phase cow, if it wouldn't work, try again after 11 days. After confirmation of estrus, AI and AI training were carried out with sperm injection in the uterus or cervix by rectum-vagina method which is common worldwide, the most effective artificial insemination technique. If cows were return to next estrus cycle, second AI was carried out about approximately 21 days after artificial insemination. After 2 months, all cows not showing return estrus should be taken pregnancy test. Every pregnant cow will be cared thoroughly. Total 48 cows administrated by $PGF_{2\alpha}$ for synchronization and after 48 hours 45 cows (93.8%) showing estrus were detected and then artificial inseminate them within who 8 cows (27.8%) showed return estrus. Therefore, Using $PGF_2{\alpha}$ for synchronization is effective to use for Mongolia breeding conditions. There are possibility of base for food production after all, including increase of livestock production in Mongolia by improvement of breeding cow with AI and embryo transfer project.

• 대한영양사협회학술지
• /
• 제7권1호
• /
• pp.87-104
• /
• 2001

This study was conducted as a part of the project developing the standards of national board test for the dietitian's licence. The purpose of this study was to define the job description of dietitians, and to describe the task elements based on the detailed analysis of the dietitians' work. This study team established the research team which was composed of food and nutrition experts, 7 of registered dietitians and 3 of university professors. Draft job description form was made to fully explain the dietitians' task elements, process and sequence by the research team. Final job description form was confirmed after the validity of 576 task elements was reevaluated upon 4 point scale test based on the frequency, importance, and difficulty by 21 field registered dietitian by the study team. It was also confirmed by the university. This form was formated by following DACUM method which analyzed the job description containing duty, task and task elements. It was organized to include every dietitians' work and to describe the every detailed process of work. Duty was defined as the specific and independent work as a dietitian, and was composed of 17 parts, i.e 10 parts in food supply management area and 6 parts in nutritional care service area and self promotion area. Duties were also divided into 99 tasks containing the 576 detailed task elements to describe definite action, steps and decisions. Seventeen parts are following; menu planning, storage and inventory control, food production, meal service, waste management, sanitation, equipment and facility management, human resource management, financial management, nutrition assessment of life cycle, nutritional assessment of several disease, nutritional assessment in specific condition, medical nutrition therapy, nutritional education, public health nutrition and self promotion. If these protocols are properly performed and presented, they can provide the likelihood that dietetics professionals work as a primary contributors in promoting health care and preventing disease nationally.

• 한국정밀공학회지
• /
• 제33권2호
• /
• pp.121-128
• /
• 2016

The mechanical jointing method is very important in the machine parts and structure. They are used by the bolts and rivet because it is very convenient to replace the parts and the structure. However, the mechanical jointing methods using the bolt and rivet needed the open hole. The machine parts life cycle is reduced because this open hole created the stress concentration. Therefore, the measurement methods are needed to evaluate phenomenon of the stress concentration. This paper discusses the development of the measurement algorithm using the digital image correlation methods to measure the strain distribution of the open hole. To implement the measurement algorithm using the DIC, the LabVIEW 2010 programming tool was used. To measure the strain distribution of the open hole, the tensile specimens having an open hole are made by using the aluminum 6061-T6. To secure the reliability of measurement result using the DIC, the DIC measurement results and FEM analysis results were compared.

• 한국강구조학회 논문집
• /
• 제24권6호
• /
• pp.647-657
• /
• 2012

원자력 배관 시스템은 엄격한 설계기준에 따라 제작 되었음에도 불구하고, 장기 사용에 따라 발생하는 감육 및 균열에 의한 파손 사례가 보고되고 있다. 이에 본 연구에서는 스테인리스강 배관 시험체의 단조하중 및 반복하중 재하실험을 실시하여 국부 감육과 균열의 손상유무 및 0%, 35%, 75%의 손상정도가 배관의 파괴거동에 미치는 영향을 실험적으로 검토하였다. 본 실험에서는 실제 원자력 발전소에서 사용되고 있는 직경 3인치 TP316 스테인리스강 엘보우와 직관 배관을 대상으로 하여, 인위적으로 곡관부와 용접부에 0%, 35%, 75%의 국부적인 감육과 균열을 도입하고 20MPa의 내압을 가한 후 재하실험을 실시하였다. 그 결과, 국부 감육 및 균열의 손상정도가 파괴모드, 최대하중, 반복회수 및 에너지흡수율에 미치는 영향을 정량적으로 평가하였다. 그리고 휨 모멘트를 이용하여 ASME의 결함 허용기준을 평가하였다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.457-461
• /
• 2007

레이저 슬라이드 마킹 시스템은 기존의 수작업으로 수행하던 작업 공정을 대체할 수 있으므로 병원의 임상병리과 등 관련 전문가들이 적극적으로 도입을 검토하고 있다. 현재 국내 병원에서는 IT기술의 발달로 각종 진단 결과의 처리에서 병원 내의 물류에 이르기까지 다양한 분야에서 전산화가 이루어지고 있다. 이에 따라 각종 검사 업무를 담당하고 있는 임상병리 부서에서도 검사 장비의 전산화, 자동화의 노력이 진행되고 있으며, 검사 업무의 핵심장비인 레이저 슬라이드 마킹 시스템을 도입하여 사용하려는 수요가 증가하고 있다. 레이저 슬라이드 마킹 시스템의 국내 시장규모는 2008년 2억5천만원이고, 2012년 17억5천만원으로 예상된다. 레이저 슬라이드 마킹 시스템은 2005년도에 국내에 처음으로 도입되었고, 제품수명 주기상 도입기에 해당하며, 향후 성장 가능성이 매우 높을 것으로 전망된다.

• 한국항행학회논문지
• /
• 제21권1호
• /
• pp.50-57
• /
• 2017

최근 국내에서 추진된 항공 관련 안전필수시스템 기술 개발 사업들이 중도에 종료되거나 최종 단계에서 실용화되지 못하는 사례가 종종 발생했다. 사업실패의 원인은 여러 가지 요인이 있겠지만 본 연구에서는 불완전한 시험평가 절차에 주안점을 두고 관련 연구를 수행하였다. 일반적으로 안전필수시스템의 시험평가 프로세스는 시스템의 전 수명주기에 걸쳐 분포되고 단계별 연속성을 가져야 하며 시스템 설계 및 획득 전략의 성숙도에 따라 다양한 방법으로 실행될 수 있다. 본 논문의 목적은 국내 안전필수 항행시스템 개발 사업의 리스크를 줄이고 성공률을 높이기 위한 방안으로 국내외 시험평가 프로세스를 분석하여 새로운 전략을 제시하는 것이다. 먼저 안전필수시스템에 대한 검증 및 확인 기법에 대해 토의하고 선진기관의 시험평가 프로세스 및 절차와 국내 현황을 분석한 뒤 국내외 시험평가 프로세스를 비교함으로써 불완전한 시험평가 절차에 대한 보완책을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.261-264
• /
• 1997

Joints and terminations for 345kV Oil Filled $1C{\times}2000mm^2$ cable have been developed and tested including BPT (Bellows Pressure Tank) on the bases of various ultra-high voltage technologies. Electrical design was performed by using Finite Element Method. The type test certified by KEPCO (Korea Electric Power Corporation) has been performed as the final stage of development. In order to confirm the reliability of long-term life for 30 years, load cycle test was conducted for 30 days with good result. As the result, the techniques we obtained from this development are applicable to higher voltage level systems (i.e. 765 kV).

• 한국항행학회논문지
• /
• 제19권4호
• /
• pp.288-298
• /
• 2015

무인기 상용화를 위해서는 유인기 수준의 안전성을 확보할 수 있는 공중 및 지상 의 충돌경보 및 회피시스템 (sense and avoid or SAA) 개발과 검증이 필요하다. SAA 검증을 위한 비행시험은 높은 시험비용과 사고위험 때문에 많은 시험사례(test case)를 검토하기 어려우므로 시뮬레이션 시험으로 보완하는 것이 필수적이다. SAA 시뮬레이션 시험을 위해 flight simulator, Matlab/Simulink 시뮬레이터와 항전장비 시뮬레이션 모델들이 서로 연동하는 통합 무인기 시뮬레이션 환경을 구축하였다. 사례연구로서 TCAS 충돌경보 simulink 모델을 개발하고 Flight Gear와 연동하여 통합 무인기 시뮬레이션 환경을 구축하였고 이를 encounter model을 이용하여 검증하였다. 통합 무인기 시뮬레이션 환경을 활용하면 항전장비 개발주기의 개념설계 단계부터 부품 및 시스템의 성능/신뢰성 분석을 시작할 수 있다.