• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3755-3761
• /
• 2013

This study aims to assess the ecological risk of the hazardous air pollutants (HAPs) emitted in the semiconductor manufacturing processes in Korea by using Quantitative Structure Activity Relationship (QSAR, EPA, US, EPI $Suite^{TM}$ 4.1). Owing to the absence of environmental standards of hazardous air pollutants in the semiconductor manufacturing processes in Korea, 18 HAPs in the semiconductor field included in both the US EPA NESHAPs and the hazardous air pollutant list of Ministry of Environment in Korea were selected. As a results 8 chemicals (44.4%) of the selected 18 HAPs were VOCs. Cyanides (cyanides) and ethylene oxides (epoxy resins), and tetrachloro-ethylene (aliphatic compounds, halides) showed long half-lives. Cyanide HAPs especially had the highest half-life with the estimated value of 356.533 days. Nickel compounds (heavy metal compounds) possessed the highest water solubility followed by acetaldehyde (aldehyde compounds), ethylene oxides, and 1,4-dioxanes. The halides, including tetrachloro-ethylenes, carbon tetra-chlorides, benzene (aromatic compounds), and lead (heavy metals), are estimated to take the longest time for biodegradation. Tetrachloroethylene, with the acute toxicity end point of 3.685-7.033 mg/L, was assessed to be the most highly toxic substance among the 18 HAPs. However, considering the absence of the HAPs in the common category of log $K_{ow}{\geq}4$and $BCF{\geq}500$, which indicates the standard of bioconcentration potentials, potentials of the bioconcentration are considered to be low.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.457-465
• /
• 2009

Lithium batteries are widely used in mobile electronic devices due to their higher voltage and energy density, lighter weight and longer life cycle compared to other secondary batteries. In particular, high demand for lithium batteries is expected for electric cars. In case of lithium batteries used in electric cars, driving distance must be calculated accurately and discharging should not be done below the level of making it impossible to crank. Therefore, accurate information about state of charge (SOC) becomes an essential element for reliable driving. In this paper, a new method of estimating the SOC of lithium polymer batteries by using AC impedance is proposed. In the proposed method, parameters are extracted by fitting a curve of impedance measured at each frequency on the equivalent impedance model and extracted parameters are used to estimate SOC. Experiments were conducted on lithium polymer batteries with similar capacities made by different manufacturers to prove the validity of the proposed method.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.794-801
• /
• 2003

As it is important to measure the degree of the deterioration and predict service life caused by chloride in concrete structure the methods of measuring chloride in the concrete is raised important problems. This study is to set a new standard for using of the colorimetric method through grasping the character of the colorimetric distinction method, and measuring the chloride content at the place discolored. Also, to predict chloride content around embeded bar and time reaching limit chloride concentration through measuring the chloride content of concrete surface by colorimetric distinction method and this study presents the new concept of concrete degradation and diagnosis of the durability by salt damage. According the results, it is possible to use colorimetric distinction method as simplified measurement to measure the fixed quantity of the chloride concentration. What is more, it would make calculation of concrete surface chloride had a wide fluctuation at the general environment extended. Also, it would be make estimating durability of reinforced concrete structures applied to the basic data.

• The Journal of Korean Physical Therapy
• /
• v.27 no.1
• /
• pp.38-42
• /
• 2015

Purpose: Accuracy and variability of movement in daily life require synchronization of muscular activities through a specific chronological order of motor performance, which is controlled by higher neural substrates and/or lower motor centers. We attempted to investigate whether transcranial direct current stimulation (tDCS) over primary sensorimotor areas (SM1) could influence movement variability in healthy subjects, using a tapping task. Methods: Twenty six right-handed healthy subjects with no neurological or psychiatric disorders participated in this study. They were randomly and equally assigned to the real tDCS group or sham control group. Direct current with intensity of 1 mA was delivered over their right SM1 for 15 minutes. For estimation of movement variability before and after tDCS, tapping task was measured, and variability was calculated as standard deviation of the inter-tap interval (SD-ITI). Results: At the baseline test, there was no significant difference in SD-ITI between the two groups. In two-way ANOVA with repeated measurement no significant differences were found in a large main effect of group and interaction effect between two main factors (i.e., group factor and time factor (pre-post test)). However, significant findings were observed in a large main effect of the pre-post test. Conclusion: Our findings showed that the anodal tDCS over SM1 for 15 minutes with intensity of 1 mA could enhance consistency of motor execution in a repetitive-simple tapping task. We suggest that tDCS has potential as an adjuvant brain facilitator for improving rhythm and consistency of movement in healthy individuals.

• Industrial Engineering and Management Systems
• /
• v.12 no.3
• /
• pp.244-253
• /
• 2013

In industries, shipping is an important issue in improving the forecasting accuracy of sales. This paper introduces a hybrid method and plural methods are compared. Focusing the equation of exponential smoothing method (ESM) that is equivalent to (1, 1) order autoregressive-moving-average (ARMA) model equation, a new method of estimating the smoothing constant in ESM had been proposed previously by us which satisfies minimum variance of forecasting error. Generally, the smoothing constant is selected arbitrarily. However, this paper utilizes the above stated theoretical solution. Firstly, we make estimation of ARMA model parameter and then estimate the smoothing constant. Thus, theoretical solution is derived in a simple way and it may be utilized in various fields. Furthermore, combining the trend removing method with this method, we aim to improve forecasting accuracy. This method is executed in the following method. Trend removing by the combination of linear and 2nd order nonlinear function and 3rd order nonlinear function is executed to the original production data of two kinds of bread. Genetic algorithm is utilized to search the optimal weight for the weighting parameters of linear and nonlinear function. For comparison, the monthly trend is removed after that. Theoretical solution of smoothing constant of ESM is calculated for both of the monthly trend removing data and the non-monthly trend removing data. Then forecasting is executed on these data. The new method shows that it is useful for the time series that has various trend characteristics and has rather strong seasonal trend. The effectiveness of this method should be examined in various cases.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.9
• /
• pp.2819-2832
• /
• 1996

The estimation of the remaining life for the aged components in power plant as well as chemical and petroleum plants has been recently concerned. The raw materials used in this study are the 1Cr-1Mo-0.25V steel which intensified P and S compositions along with the nominal compositions of ASTM A 470 standard. Five kinds of specimens with the different degradation levels were prepared by isothermal aging heat treatment at 630.deg.C. The mechanical properties and rotated bending fatigue strength of virgin and aged 1Cr-1Mo-0.25V steel have been investigated through the hardness, tensile, fatigue test, SEM fractograph and EDS analysis at 538.deg.C and room temperature, respectively. Thus the data of aged specimens were compared with those of virgin specimen to evaluate the aging effects. The main results obtained in this study are as follows ; The decrease of the yield and tensile strength due to degradation was distinguished until 50, 000hrs simulated service time. And it was confirmed that the considerable amount of P, Mn, Cr and S was precipitated at the grain boundary of aged material through the SEM and EDS analysis. The rotated bendingd fatigue strength at 538.deg.C of virgin, 25, 000, 50, 000, 75, 000 and 100, 000 hrs aged material was decreased 44.6 %, 49.6 %, 51.5 %, 52.4% and 53.8% than that of virgin material at 10$_{7}$cycles of room temperature, respectively. The major cracks of virgin and aged materials mainly initiated at the inclusions including Si, P and Mn compositions which were located at the outer periphery of the specimen.n.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.1
• /
• pp.64-75
• /
• 2013

As both laboratory accelerated experiment and field exposure experiment were performed, at recent, the fifth field test at five year exposures was proceeded according to long period experimental plan. Field experiment, for the adoption of the developed evaluation model, which is consisted of the analysis of chloride penetration profile at gate bridges of sea-dike completed 30 years ago was carried out during upgrading the basic evaluation model with analyzing the annual field test data. The surface concentration of chlorides was replaced to the concentration of chloride of inner concrete near the surface chlorides among his research results at basic model. Maage's suggestion function was accepted too as a diffusion coefficient of chloride after verifying the change of diffusion coefficient by analysis of annual field test data. The comparison of field data with model predictions and the estimation of remaining life time demonstrates that the proposed updated model and maintenance simulation system can be used to predict the chloride penetration profile in the marine tidal zone and appropriate repair period and cost.

• Korean Journal of Veterinary Research
• /
• v.46 no.3
• /
• pp.285-289
• /
• 2006

This study was performed to assess the growth plate closure time with aging in the Korean native goat. Radiographs of proximal and distal epiphysis of humerus, radius, ulna, femur and tibia were obtained at 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 13, 14, 17, 18, 20, 21, 30, 43 and 52 weeks after birth in 30 Korean native goats. The secondary ossification centers were scrutinized and assessed the maturity process on the basis of the criteria(stage 0 to 10). The secondary ossification centers of proximal and distal epiphysis of humerus, radius, femur and tibia and proximal ulna epiphysis appeared immediately after birth. While, that of distal ulna epiphysis appeared during the 1st to 2nd week of life. The fusion of distal humeral epiphysis occurred during the period from 8 to 12 months. The fusion of proximal radial epiphysis and distal tibial epiphysis were found at 1 year. The fusion of proximal and distal epiphysis of ulna and femur, proximal epiphysis of humerus and tibia and distal epiphysis of radius were found at 1 year or more than 1 year. As a result, growth plate closure was highly related to age in the Korean native goat and it is suggested that the estimation of animal's age might be useful by illustration of maturity process of the secondary ossification centers in the Korean native goat.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.147-153
• /
• 2012

Precise estimation f a structure's dynamic characteristics is indispensable for ensuring stable dynamic response during life time especially for the structures which can experience resonance such as railway bridges. Especially, concrete track can change the modal properties of the railway bridge, through the contribution of stiffness as well as mass effects, generally only the mass effect is considered in dynamic analysis of the railway bridge. In this paper, static and dynamic behaviors of railway bridge with concrete track were investigated through experimental study. Also, numerical analysis was performed about considering only mass of concrete track and together with stiffness and mass of concrete track. These were compared with experiment value. Numerical analysis value considering together with stiffness and mass of concrete track was similar experiment value. Therefore, when dynamic analysis of railway bridge with concrete track is performed, the contribution of stiffness as well as mass effects for concrete track is considered.

• The Journal of Fisheries Business Administration
• /
• v.46 no.3
• /
• pp.103-118
• /
• 2015

The purpose of this paper is to discuss possibilities of applying growth curve models, such as Logistic, Log-Logistic, Log-Normal, Gompertz and Weibull, to three specific technology areas of Fishery Science and Technology in the process of measuring their technology level between Korea and countries with the state-of-the art level. Technology areas of hazard control of organism, environment restoration, and fish cluster detect were selected for this study. Expert panel survey was conducted to construct relevant panel data for years of 2013, 2016, and a future time of approaching the theoretical maximum technology level. The size of data was 70, 70 and 40 respectively. First finding is that estimation of shape and location parameters of each model was statistically significant, and lack-of-fit test using estimated parameters was statistically rejected for each model, meaning all models were good enough to apply for measuring technology levels. Second, three models other than Pearl and Gompertz seemed very appropriate to apply despite the fact that previous case studies have used only Gompertz and Pearl. This study suggests that Weibull model would be a very valid candidate for the purpose. Third, fish cluster detect technology level is relatively higher for both Korea and a country with the state-of-the-art among three areas as of 2013. However, all three areas seem to be approaching their limits(highest technology level point) until 2020 for countries with the state-of-the-art. This implies that Korea might have to speed up her research activities in order to catch up them prior to 2020. Final suggestion is that future study may better apply various and more appropriate models respectively considering each technology characteristics and other factors.