• Title/Summary/Keyword: Life time

Search Result 13,636, Processing Time 0.044 seconds

A Study on the Life Time of RCD in Coastal Area (해안지역에서의 저압용 누전차단기 교체주기 연구)

  • Kim, Chong-Min;Choi, Myeong-Il;Shong, Kil-Mok;Seo, Jung-Youl;Shin, Jin-Yong;Kim, Chang-Hwan
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.25 no.1
    • /
    • pp.85-92
    • /
    • 2011
  • The role of RCDs(Residual Current Protective Device) that are installed before the load is very important for preventing electric shock and electrical fire. However, although fault rate of RCD is increasing due to deterioration and long period usage, the RCD is permanently used without a checking of performance evaluation and it causes the electrical accident. In this paper, the amount of airborne chloride is researched in domestic costal area and the accelerated life test is conducted using a salt water spray tester in order to decide the life time of RCD. Aa a result of an accelerated life test, the MTTF(Mean Time To Failure) of RCD is 110.81 hours and B10 life time of RCD is 45.81 hours for the all samples. when an accelerated life test result is applied to within 2 km costal area, the life time of RCD is predicted about 5 years.

Development of accelerated life test method for mechanical components using Weibull-IPL(Inverse Power Law) model (와이블-역승법을 이용한 기계류부품의 가속시험 방법 개발)

  • Lee, Geun-Ho;Kim, Hyoung-Eui;Kang, Bo-Sik
    • Proceedings of the KSME Conference
    • /
    • 2003.04a
    • /
    • pp.445-450
    • /
    • 2003
  • This study was performed 10 develop the accelerated life test method using Weibull-IPL(Inverse Power Law) model for mechanical components. Weibull-IPL model is concerned with determining the assurance life with confidence level and the accelerated life test time From the relation of weibull distribution factors and confidence limit, the testing times on the no number of failure acceptance criteria arc determined. The mechanical components generally represent wear and fatigue characteristics as a failure mode. IPL based on the cumulative damage theory is applied effectively the mechanical components to reduce the testing time and to achieve the accelerating test conditions. As the actual application example, accelerated life test method of agricultural tractor transmission was described. Life distribution of agricultural tractor transmission was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 3,000 hours and 90% confidence level for one test sample. According to IPL, because test time call be shorten in case increase test load test time could be reduced by 482 hours when we put the load 1.1 times of rated load than 0.73 times of rated load that is equivalent load calculated by load spectrum of the agricultural tractor. This time, acceleration coefficient was 11.7.

  • PDF

Accelerated Life Test Using Structural Analysis of a Helicopter Accumulator (헬기용 축압기의 구조해석에 의한 가속 수명시험)

  • Lee, Geon-Hui;Hur, Jang-Wook
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.19 no.6
    • /
    • pp.67-72
    • /
    • 2020
  • Life tests are essential in reducing the catastrophic damage caused by the accidents of large machinery such as aircraft and ships. However, life tests are challenging to implement due to the high costs and time required to test the life of large machinery parts. Therefore, it is advantageous and convenient to apply accelerated life test techniques for key components to reduce costs and time. In fact, extensive research has already been conducted on these techniques. However, recently, there have been cases in which an experimental value was applied to the shape parameter of the Weibull distribution used in the reliability test, but the test time was not significantly reduced. Therefore, in this paper, the shape parameters are estimated from the probability density function of the Weibull distribution for the analysis of an accelerated life test for bladder accumulators, which are core components of military helicopters. The test time was derived based on the number of samples and confidence level by substituting it into the test time equation. Next, the accelerated life test time was calculated using the steady-state test time with an acceleration factor obtained from the Arrhenius model. The steady-state life test required approximately 15,000 H, whereas the accelerated life test time for one sample at 100 ℃ was 34% shorter than that of the steady-state life test.

Mechanical Reliability(Life-Time) Estimation for 25.8kV Eco Solid Insulated Switchgear (25.8kV급 친환경 고체절연차단기(Solid Insulated Switchgear)에 대한 기계적 신뢰성(수명) 평가)

  • Lee, Do-Hoon;Lee, Seog-Won;Park, Seok-Weon;Kim, Young-Geun;Lee, Jhong-Ho
    • The Transactions of the Korean Institute of Electrical Engineers P
    • /
    • v.59 no.2
    • /
    • pp.202-205
    • /
    • 2010
  • In this paper, mechanical reliability(Life-time) estimation method for 25.8kV SIS(Solid Insulated Switchgear) has been studied. Recently enacted KEPCO's standard includes clause that have to submit a warrantable reliability data for life-time(over B10 25 years) of an epoxy-solid insulating material. Accordingly, this research was carried out on the ALT(Accelerated Life Test) and Life-Estimation method for SIS's insulating material. Mechanical life-time estimation for SIS's insulating material is to verify reliability for tensile creep & fatigue stress, which is the major mechanical stress of SIS. This study proved that SIS's reliability for mechanical stress and established that confidence for estimation results in further verification test.

A Bulk Sampling Plan for Reliability Assurance (벌크재료의 신뢰성보증을 위한 샘플링검사 방식)

  • Kim, Dong-Chul;Kim, Jong-Gurl
    • Journal of the Korea Safety Management & Science
    • /
    • v.9 no.2
    • /
    • pp.123-134
    • /
    • 2007
  • This paper focuses on the in-house reliability assurance plan for the bulk materials of each company. The reliability assurance needs in essence a long time and high cost for testing the materials. In order to reduce the time and cost, accelerated life test is adopted. The bulk sampling technique was used for acceptance. Design parameters might be total sample size(segments and increments}, stress level and so on. We focus on deciding the sample size by minimizing the asymptotic variance of test statistics as well as satisfying the consumer's risk. In bulk sampling, we also induce the sample size by adapting the normal life time distribution model when the variable of the lognormal life time distribution is transformed and adapted to the model. In addition, the sample size for both the segments and increments can be induced by minimizing the asymptotic variance of test statistics of the segments and increments with consumer's risk met. We can assure the reliability of the mean life and B100p life time of the bulk materials by using the calculated minimum sample size.

An Estimation of Life Time in Epoxy Composites Using Weibull Distribution (와이블 분포를 이용한 에폭시 복합체의 수명시간 예측)

  • 오현석;이동규;장인범;박건호;김용주;이준웅
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1997.11a
    • /
    • pp.360-363
    • /
    • 1997
  • The method of estimating life time of epoxy composites which be widely used for transformers has been studied in this paper. The breakdown properties of specimens are observed by appling high AC voltage at the room temperature from a series of the experiments. Afterwards, the breakdown time was determined under the constant voltage below the lowest breakdown voltage. Also, V-t properties were found out using weibull distribution widely used in the applications of discrete data for estimating life time of epoxy composites and life exponent n was gained properly. when life exponent is gained is found out, the tong breakdown life time at used voltage can be estimated from breakdown experiments in short time using reverse law of n power.

  • PDF

Life-Time Prediction of HNBR Diaphragm in Oil Reservoir (유압구동장치 동력원용 고무 다이아프램 저유기의 수명 예측 연구)

  • Kim, Sol A
    • Journal of Drive and Control
    • /
    • v.18 no.2
    • /
    • pp.32-37
    • /
    • 2021
  • The piston reservoir is mainly used in hydraulic blow-down system for aerospace engineering. The reservoir is heavy due to both hydraulic cylinder and piston in pressurization. The positive expulsion tank with rubber diaphragm has been mostly applied propellant and fuel tank at low pressure to satellites. To reduce weight, the reservoir that can be used at high pressure with rubber diaphragm was developed. In this research, the prediction of life-time for the rubber diaphragm was implemented through an accelerated life test, as a part of development of new reservoir. Also, the diaphragm was stored in an temperature chamber at the same condition as and operation with hydraulic oil. As a result, the life-time for a rubber diaphragm was successfully evaluated via Arrhenius law and Time-Temperature Superposition based on failure times over temperatures in the accelerated test.

Effect of part-time employment experience on adaptation to university life in dental hygiene students (일부 치위생과 학생의 아르바이트 경험이 대학생활적응에 미치는 영향)

  • Shin, Seon-Haeng
    • Journal of Korean society of Dental Hygiene
    • /
    • v.15 no.6
    • /
    • pp.1033-1041
    • /
    • 2015
  • Objectives: The purpose of the study is to find out the effect of part-time employment experience on adaptation to university life in dental hygiene students. Methods: A self-reported questionnaire was completed by 288 dental hygiene students in Seoul and Gyeonggido from September to October, 2014. The questionnaire consisted of general characteristics of the subjects(5 items), part-time employment experience(6 items), and adaptation to university life(53 items). The instrument for adaptation to university life was adapted from Baker and Sirky and modified by Kwon. Likert 5 point scale adaptation included personal emotion adaptation, academic adaptation, social adaptation, and university environment adaptation. Cronbach's ${\alpha}$ was 0.80 in the study. Results: The adaptation to university life was 3.0 points. The higher the economic level was, the higher the personal emotional adaptation(p<0.001) and academic adaptation were(p<0.05). The adaptation to university life was positively influenced by tuition support by parents and part-time employment(p<0.05). The part-time employment was significantly helpful to future job selection, social adaptation, and university environment adaptation(p<0.001). Economic stability and advantage of future job selection had a positive influence on the adaptation to university life. So the adaptation to university life was proportional to younger age, economic stability, and advantage to future job selection. Conclusions: It is very important to give a positive motivation and stimulation, and a careful counseling to the students in part-time employment. In order to encourage the part-time employed students, major-related part-time job opening must be given.

Differences in Life Satisfaction according to Type of Time Use in the Rural Elderly (농촌노인의 생활시간 유형에 따른 생활만족도 차이)

  • Cho, Hee-Keum
    • Journal of Family Resource Management and Policy Review
    • /
    • v.23 no.2
    • /
    • pp.41-59
    • /
    • 2019
  • The purpose of this study was to explore a typology of time use and analyze differences in life satisfaction according to the types of time use in the rural elderly. The research subjects were 1,000 people aged 65 years and over living in the rural areas of Korea. The data were collected through structured questionnaires and a time-use diary. The statistical methods used in the analysis included calculation of the mean and the standard deviation, ANOVA, Duncan's multiple range test, cluster analysis, and multiple regression analysis. The time use practices of the rural elderly were classified into three types: work-leisure balance, work-oriented, and leisure-oriented type. Life satisfaction of the rural elderly differed according to the type of time use. The work-oriented types showed the highest scores of life satisfaction, and leisure-oriented types showed the lowest.

The associations between marital satisfaction and life satisfaction among retirees in later life: a longitudinal comparison (은퇴 노인의 부부관계 만족도와 삶 만족도의 관계에 대한 종단적 비교)

  • Choi, Bomi;Jun, Hey Jung;Joo, Susanna
    • Journal of Family Relations
    • /
    • v.21 no.2
    • /
    • pp.77-96
    • /
    • 2016
  • Objectives: The aims of this study are to examine the associations between marital satisfaction and life satisfaction among Korean retirees in later life and to test whether the degrees of associations increased over time. Method: Nationally representative Korean Longitudinal Study of Ageing data from wave 1 (in 2006) to wave 4 (in 2012) was utilized and retirees in later life (65-89 years old, N=402) were analyzed. Latent growth modeling (LGM) and model constraint were applied using Mplus 7.3. Age, sex, household income, subjective health, depressive symptoms and elapsed time after retirement were included as control variables. Results: Linear unconditional LGM fitted the data well and showed gradual decrease in life satisfaction. Conditional LGM revealed significant associations between marital satisfaction and life satisfaction from time 1 to time 4. According to model constraint test, the size of associations between marital satisfaction and life satisfaction did not change with time. Conclusions: To sum up these results, the associations between marital satisfaction and life satisfaction were significant and relatively stable over time among retirees in later life. This study suggests one's spouse is a fundamental component of social convoy among Korean retirees in later life. Therefore, intervention programs targeted toward enhancing marital relationships among retirees' couples will help them to live a better life.