• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.362-364
• /
• 2005

In abroad, thousands of generator testing were accomplished because of importance about generator stability parameters. But it was introduced TWBP and processing in Korea. In addition to, related rules of generator testing had been weaken. Without guidelines, practical uses are much limited. So, it studied compliance life cycle about generator facility parameters for stability analysis. This paper presents security scheme and working rules using generator testing and disturbance recordings, considering domestic circumstance.

• 품질경영학회지
• /
• 제23권1호
• /
• pp.15-28
• /
• 1995

We consider a step-stress life testing which is devised for a two-component parallel system with considerably long life time. To describe such a system, we use an exponential distribution as the survival function. The lift distribution is assumed between the log mean life time and the stress with the cumulative exposure model. The criterion for optimality is to minimize the sum of the variances of the maximum likelihood estimators of the mean life times of each part under the normal stress.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권2호
• /
• pp.127-140
• /
• 2011

This paper presents an accelerated life test of aviation taxiway lights installed in the airport to help safe navigation of airplanes at night or in bad weather. Recently halogen lamps of taxiway lights are replaced by LED ones and their reliability needs yet to be verified. Thus, effective test conditions are designed reflecting the failure modes and mechanisms from the previous studies on LED, which include the accelerated degradation process. The test is performed under the temperature $70^{\circ}C$ and $90^{\circ}C$ for two types of LED lights, taxiway center line lights(TCLL) and taxiway edge lights (TEDL). The failure time data were analyzed using lognormal distribution and Arrhenius model to find the life-stress relationship, acceleration factor and life characteristics under the normal condition temperature $30^{\circ}C$.

• 품질경영학회지
• /
• 제25권2호
• /
• pp.15-27
• /
• 1997

This paper describes a highly accelerated life test (HALT, USPCBT) method for rapid qualification testing of STH PWB(Silver Through Hole Printed Wiring Boards). This method was carried out to be an alternative to the present time-consuming standard 1344 hours life testing(THB). The accelerated life test conditions were $121^{\circ}C$/95%R.H. at 50V bias and without bias. Their results are compared with those observed in the standard 1344 hours life test at $40^{\circ}C$/95%R.H. at 50V bias and without bias. The studies were focused on the samples time-to-failure as well as the associated conduction and failure mechanisms. The abrupt drop of insulation resistance is due to the absorption of water vapour. And the continuous drop of insulation resistance is due to the Ag migration. The ratios of time-to-failure of HALT(USPCBT) to THB were 25 and 11 at 50V bias and without bias respectively.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.58-63
• /
• 2018

Recently in weapon systems development, the importance of reliability has been emphasized due to the increase in complexity and the rapid development of key components and components. Accordingly, the importance of lifespan testing is increased. However, lifespan testing to verify the reliability of a system is costly and takes a lot of time. Therefore in this paper, it was demonstrated that the most critical item of a bladder type accumulator is the bladder. Fatigue life is sensitive to temperature and pressure, with temperature having more impact. The fatigue life of the bladder was estimated to be 18,140 hr through fatigue analysis, which satisfies the required life expectancy of 10,000 hr.

• 대한기계학회논문집
• /
• 제10권2호
• /
• pp.223-231
• /
• 1986

본 연구에서는 공구현미경을 이용하여 간판하게 공구수명을 구할 수 있는 방법을 제시하기 위한 전 단계로서 공구의 마멸거동에 대하여 연구하였다. 공구의 마멸은 매우 복잡한 현상이며 대부분의 경우 주로 마멸의 누증이 공구를 파손에 이르 게 한다. 마멸의 형태중 마멸(abrasion wear)과 점착에 의하여 발생되는 측면마멸이 가공물의 표면조도, 정밀도 및 절삭동력에 미치는 영향과 측정상의 경의 때문에 공구 수명을 지배하는 주마멸인자로 취급되고 있다. 따라서 절삭시간에 대한 공구의 측면 마멸 거동을 분석하여 초경공구의 측면마멸유선의 직선모델을 구하고, 측면마멸유선의 일반모델을 확립하였다.

• 대한간호학회지
• /
• 제33권3호
• /
• pp.414-424
• /
• 2003

Purpose: The purpose of this study was to develop elderly meaning in life scale with high validity and reliability. Method: The process of development of this scale were as follows. A conceptual framework composed of 4 phases of meaning in life of elderly was identified based on the literature review and interviews with elderlies and discussion with experts in meaning in life. Total 62 items, 4-points scale were developed. Through reliability testing, factor analysis, 40 preliminary items were selected. By means of internal consistency of 40 items, 2 items whose inner-items correlation coefficient was below .30 were deleted. Through factor analysis 1 item whose factor loading was below .30 was deleted. Finally 37 items were remained. To verify 37 items, factor analysis, reliability testing, LISEREL were done. Data were collected from 320 elderly subjects in Busan-KyungNam and Jeonla Province from May to June in 2002. SPSS WIN. 10.0 Program was used. Result: The result of factor analysis of 37 items, 8 factors were extracted. These factors were labeled as ‘self- awareness and self-acceptance’, ‘contentedness with life’, ‘purpose in life’, ‘love in family’, ‘role awareness’, ‘futuristic aspiration’, ‘commitment’, and ‘experience of love’. These factors included 4 phases of the meaning in life. Cronbach's Alpha of 37 items was .908 and correlation coefficient of PIL was .75. Conclusion: The researchers recommend the follows: The explorative study on the variables related to meaning in life are needed for criterion validity of this scale. The studies on meaning in life of different age groups, subjects are needed for reverification.

• 한국축산식품학회지
• /
• 제38권6호
• /
• pp.1216-1225
• /
• 2018

Shelf-life is defined as the amount of time during which a food product retains its desired sensory, chemical, and physical characteristics while remaining safe for consumption. The food industry needs to rapidly obtain the necessary information for determining the shelf life of its products. Here we studied the approaches available for conducting accelerated shelf-life tests. Accelerated shelf-life testing is applied to a variety of products to rapidly estimate change in characteristics with time. The aim of this work was to use accelerated shelf-life testing to study the changes in pH, microbiology, and sensory characteristics of ice cream by the application of a kinetic approach and, based on the observations, to estimate its shelf life. As per the current law, there is no shelf life on ice cream. Our results suggest that the shelf life of an ice cream sample was 24.27 months at $-18^{\circ}C$, 2.29 months at $-6^{\circ}C$, 0.39 months at $-1^{\circ}C$, and 0.15 months at $4^{\circ}C$. Results of this study suggest that a set expiration date on ice cream might also contribute to effective management of ice cream characteristics in the retail chilled chain.

• 벤처창업연구
• /
• 제7권4호
• /
• pp.49-54
• /
• 2012

본 논문에서는 시험시간과 오류의 수정개수를 동시에 고려하는 소프트웨어 출시 모형을 제시한다. 소프트웨어의 시험기간은 정해진 시험시간이나 오류수정개수 중 먼저 도래하는 시간까지 지속된다. 고려되는 비용은 시험기간 중의 오류수정비용과 출시 지연비용, 그리고 시험기간 경과 후의 운용 중 발생하는 오류수정비용으로 구성된다. 생명주기는 특별한 제한이 없고, 오류의 검출과정은 비제차 포아송과정을 따른다고 가정한다. 총비용함수가 도출되며 이전의 출시방안들은 제시된 모형의 특별한 경우임을 보인다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.511-516
• /
• 2001

Recently small punch creep testing (or miniature disc bend creep test) has received much attention through European collaborative research projects. This method was considered as a substitute for the conventional creep rupture testing by which the residual creep life is measured from the specimen taken out from serviced components of high temperature plants. It would be beneficial if the material creep properties such as power law creep constants as well as the creep rupture life can be measured from the small punch creep test. In this paper a method of assessing creep constants from the small punch creep testing is proposed. Finite element analyses were performed to investigate evolution of stress and strain rate at the weakest locations of the small punch creep specimen. Elastic-plastic-secondary creep analyses were carried out. The estimation equations for creep constants by the small punch creep testing are proposed based on the finite analysis results. Small punch creep tests were also performed with 9Cr steel and the accuracy of the proposed equation was verified by the experimental results.