• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권3호
• /
• pp.267-279
• /
• 2011

LEDs have been used extensively in the mobile device, automobile, and general lighting because they are semi-permanent, long life, less power consumption, reliable and environmentally friendly. In this paper, the accelerated degradation test(ADT) for a general lighting 4W LED Lamp using external converter is considered. The conditions of ADT are high temperature and high humidity. We show that its life time is log-normally distributed with same parameters under both a normal condition and an accelerated condition, and also derive an accelerated factor.

• International Journal of Reliability and Applications
• /
• 제14권1호
• /
• pp.27-39
• /
• 2013

In this article, a new model based on the Rayleigh distribution is introduced. This model is useful and practical in physics, reliability, and life testing. The statistical and reliability properties of this model are presented, including moments, the hazard rate, the reversed hazard rate, and mean residual life functions, among others. In addition, it is shown that the distributions of the new model are ordered regarding the strongest likelihood ratio ordering. Four estimating methods, namely, method of moment, maximum likelihood method, Bayes estimation, and uniformly minimum variance unbiased, are used to estimate the parameters of this model. Simulation is used to calculate the estimates and to study their properties. Finally, the appropriateness of this model for real data sets is shown by using the chi-square goodness of fit test and the Kolmogorov-Smirnov statistic.

• 대한산업공학회지
• /
• 제14권2호
• /
• pp.91-97
• /
• 1988

In accelerated life testing, a relationship is usually assumed between the stress and a parameter of the lifetime distribution. However, the true relationship is not usually known, and therefore, the experimenter may wish to provide protections against the likely departures from the assumed relationship. This paper considers an accelerated life test in which two stress levels are involved, and the lifetime of each test item at a stress level is assumed to have an independent, identical, exponential distribution. For the case where a first order relationship is assumed while the true one is quadratic, a procedure is developed for allocating test items to stress levels such that the bias and/or the variance of the estimated(log-transformed) mean lifetime at the use condition is minimized.

• Tribology and Lubricants
• /
• 제13권3호
• /
• pp.20-27
• /
• 1997

The tribological behavior for $MoS_2$ bonded films is evaluated according to the international standard testing methods, such as ASTM D 2625 (Falex tester) and ASTM D 2714 (LFW1 tester). It has been well known that the tribological behavior for $MoS_2$ bonded films is affected by several factors. However, in this work, the wear life for $MoS_2$ bonded films is mainly experimentally measured with different contact geometry, and evaluated in terms of the frictional heating according to the contact geometry of tribotester. The test results show that the wear life of $MoS_2$ bonded films is significantly affected not only by the frictional heating, but also by the contact pressure, test running-in conditions, and the contact conformity.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제3권2호
• /
• pp.103-116
• /
• 2003

We carry out reliability tests and investigate the failure mechanisms. of the wafer level vacuum packaged MEMS gyroscope sensor using an accelerated degradation test. The accelerated degradation test (ADT) is used to evaluate reliability (and/or life) of the MEMS vacuum package and to select the accelerated test conditions, which reduce the reliability testing time. Using the failure distribution model and stress-life model, we are able to estimate the average life time of the vacuum package, which is well agreed with the measured data. After improving several package reliability issues such as prevention of gas diffusion through package, we carry out another set of accelerated tests at the chosen acceleration level. The results show that reliability of the vacuum packaged gyroscope has been greatly improved and can survive without degradation of performance, which is the Q-factor in gyroscope sensor, during environmental stress reliability tests.

• International Journal of Reliability and Applications
• /
• 제4권4호
• /
• pp.171-181
• /
• 2003

This paper proposes a U-test statistic for the problem of testing that a life distribution is exponential against the alternative that it is harmonic new better (worse) than used in expectation upper tail HNBUET (HNWUET), but not exponential on complete data. Selected critical values are tabulated for sample sizes n =5(1)60. The asymptotic normality of the statistic is proved and a comparison is made of the asymptotic efficiency between the statistic and other statistics. The power of the test is studied by simulation. A test for HNBUET in the case of randomly right-censored data is also considered. An application of the proposed test statistic in medical sciences is given.

• 비파괴검사학회지
• /
• 제23권5호
• /
• pp.497-519
• /
• 2003

Science and technology is an essential ingredient of the progress in modern society. Measurements enable action and actions enable results. Non-Destructive Evaluation (NDE) - the science and technology of measurements without affecting the Properties and performance of the test object is an interdisciplinary domain area of high significance far ensuring quality, productivity and safety thus enabling better qualify of lift to the inhabitants on this planet. The test object can be material, component, plant, earth, environment etc. Total qualify management, total productivity management, concurrent engineering and many other essential ingredients of success in plant engineering and manufacturing industry are dependent on NDE far success and good returns on investments.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.49-55
• /
• 2000

This study describes the fatigue characteristics for Al2024 alloy, which is aircraft structure material. For this work, the plane-strain fracture toughness test, the plane-stress fracture toughness test and the crack growth rates test were conducted under the standard testing method. Test equipment is a computer-controlled closed-loop fatigue testing machine. The data of each test result is very important to aircraft structure reliability estimation, life prediction, design analysis, endurance analysis and damage tolerance analysis. In addition, the fatigue crack growth threshold($\DeltaKth$) value decreased as the stress ratio increased. Also, $\DeltaKth$ decreased as the thickness increased in LT, TL directions.

• 펄프종이기술
• /
• 제48권1호
• /
• pp.19-26
• /
• 2016

In the consumer products industry, it has been highly desirable to develop objective test methods to replace subjective evaluation methods. In developing an objective test method, subjective evaluation data should be on a linear scale. According to Thurstone's theory of comparative judgment, a%-preference from a paired-comparison test can be converted to a linear-scale value. The required number (N) of paired-comparison tests increases dramatically as the number of products increases. This problem should be solved by classifying the total products into several subgroups consisting of 3-4 products in each group. By doing so, it can not only significantly reduce the number of required paired-comparison tests, but it can also obtain more reliable, reproducible data.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권1호
• /
• pp.49-55
• /
• 2018

Purpose: To propose improved method for normalization, compare to the de facto international standard which is IESNA TM-21 or conventional normalization methods. Methods: Firstly, we analysed conventional methods and specified the problem of normalization method which is based on first measured data. Secondly, we proposed our approach which is based on the design specification. Lastly, we studied a real degradation data which is conducted for 15,000 hours. Conclusion: Proposed normalization method is better approach because it can reflect real data and design specification, and reduce distortion when analysing degradation data. Also, It is appliable to other long-life reliability items.