• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.29-35
• /
• 1999

At the design of Mark III membrane type LNG tank, an analytical and experimental approach on the fatigue strengths of membrane and its welds are very important in order to assist designers and surveyors. In this study, fatigue tests of lap weld of Mark III membrane type LNG tank were carried out and cumulative damage factor was calculated in order to estimate the fatigue life by probability density function and rule methods. It contained the following tests and reviews : 1) The fatigue tests of lap weld of stainless steel according to statistical testing method recommended by JSME, 2)Preparation of S-N curve for lap welds considering the statistical properties of the results of fatigue tests. 3) Procedure for estimating the initiation life of fatigue crack of lap welds under variable loads by the rule lf classification society and probability density function, 4) Guideline for inspection of lap welds fo membrane type LNG tank.

• International Journal of Safety
• /
• 제3권1호
• /
• pp.38-46
• /
• 2004

This paper introduces the software life-cycle V&V (verification and validation) tasks for the KNICS (Korea nuclear instrumentation and control system) project. The objectives of the V&V tasks are mainly to develop a programmable logic controller (PLC) for safety critical instrumentation and control (I&C) systems, and then to apply the PLC to developing the prototype of an engineered safety features-component control system (ESF-CCS) in nuclear power plants. As preparative works for the software V&V, various kinds of software plans and V&V task procedures have been developed according to the software life-cycle management. A number of software V&V tools have been adopted or developed to efficiently support the V&V tasks. The V&V techniques employed in this work include a checklist-based review and inspection, a requirement traceability analysis, formal verification, and life-cycle based software testing.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제9권1호
• /
• pp.37-45
• /
• 2009

Recently mechanical watt-hour meters are being replaced by electronic watt-hour meters. The replacement period of mechanical watt-hour meters is 7 years. This period is based on long term historical data. The replacement period of electronic watt-meters is also 7 years. This period is determined using the replacement period of mechanical watt-hour meters. However lifetime of mechanical watt-hour meters is different from the lifetime of electronic meters. In order to determine desirable replacement period of electronic watt-hour meters, accelerated life tests of major components in electronic watt-hour meters were performed. The test results showed that LCD was the component which had the shortest lifetime. In this paper, lifetime of electronic watt-hour meters manufactured by 3 company was estimated and life test standard for LCD was developed.

• Structural Engineering and Mechanics
• /
• 제49권4호
• /
• pp.509-521
• /
• 2014

In this paper two protocols of Wireless Sensor Networks (WSN) are examined through both a simulation and a case study. The simulation was performed with the optimized network (OPNET) simulator while comparing the performance of the Ad-Hoc on demand Distance Vector (AODV) and the Dynamic Source Routing (DSR) protocols. This is compared and shown with real-world measurement of deflection from eight wireless sensor nodes. The wireless sensor response results were compared with accelerometer sensors for validation purposes. It was found that although the computer simulation suggests the AODV protocol is more accurate, in the case study no distinct difference was found. However, it was shown that AODV is still more beneficial in the field as it has a longer battery life enabling longer surveying times. This is a significant finding as a large factor in determining the use of wireless network sensors as a method of assessing structural response has been their short battery life. Thus if protocols which enhance battery life, such as the AODV protocol, are employed it may be possible in the future to couple wireless networks with solar power extending their monitoring periods.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.232-241
• /
• 1997

The tribological behavior for MoS$_2$ bonded films is evaluated according to the international standard testing methods, such as ASTM D 2625(Falex tester) and ASTM D 2714(LFW-1 tester). It has been well known that the tribological behavior for MoS$_2$ bonded films is affected by several factors. However, in this work, the wear life for MoS$_2$ bonded films is mainly experimentally measured with different contact geometry, and evaluated in terms of the frictional heating according to the contact geometry of tribotester. The test results show that the wear life of MoS$_2$ bonded films is significantly affected not only by the frictional heating, but also by the contact pressure, test running-in conditions, and the contact conformity.

• International Journal of Reliability and Applications
• /
• 제17권1호
• /
• pp.85-105
• /
• 2016

In this paper accelerated life testing is incorporated in quality control technique of acceptance sampling plan to induce early failures in high reliability products.Stress under accelerated condition can be applied in constant-stress, step-stress and progressive-stress or combination of such loadings. A ramp-stress results when stress is increased linearly (from zero) with time. In this paper optimum failure-censored ramp-stress accelerated life test sampling plan for log-logistic distribution has been formulated with cost considerations. The log-logistic distribution has been found appropriate for insulating materials. The optimal plans consist in finding optimum sample size, sample proportion allocated to each stress, and stress rate factor such that producer's and consumer's interests are safeguarded. Variance optimality criterion is used when expected cost per lot is not taken into consideration, and bilevel programming approach is used in cost optimization problems. The methods developed have been illustrated using some numerical examples, and sensitivity analyses carried out in the context of ramp-stress ALTSP based on variable SSP for proportion nonconforming.

• 동력기계공학회지
• /
• 제20권3호
• /
• pp.29-35
• /
• 2016

Because of the severe service environment of the large marine vessel, the fatigue strength and its evaluation play an important role in design and maintenance of marine crankshaft. The aim of this work is to investigate the probability distribution of fatigue lives in crank throw forged steel and to develop the methodology for estimation of the probabilistic design fatigue strength. Detailed studies were performed on the constant amplitude axial loading fatigue test. The experiments were controlled by stress ratio of -1 and 15Hz frequency for each stress level. The considerable variability of fatigue life was observed in each stress level under rigidly controlled constant fatigue testing conditions. The fatigue life of crank throw forged steel was well followed the log-normal and Weibull distribution. In addition, it can be used for the estimation of probabilistic design fatigue strength by using the proposed methodology.

• 보험의학회지
• /
• 제3권1호
• /
• pp.142-148
• /
• 1986

Liver is an oragan which has various functions. For this functions in liver disease change variously, many methods of examination of them are invented. Each liver disease impairs these functions diversly rather than uniformly, thus it is possible to differentiate each disease by using various methods of testing it. Liver has high reproductive capacity and despite partial impairment of its function localized disease may not show any abnormality in liver function test due to compensation of remaining intact tissue of the liver. Thus the result of liver function test should be interpreted under adequate clinical investigation with other test, not depending on the liver function test only. This thesis deals with the composition, distribution in living body and clinical significance of liberating enzyme, GOT, GPT, and LDH which are included in serum enzyme that show abnormality in liver disease.

• International Journal of Reliability and Applications
• /
• 제15권1호
• /
• pp.65-76
• /
• 2014

In this article, a new model based on Lomax distribution is introduced. This new model is both useful and practical in areas such as economic, reliability and life testing. Some statistical properties of this model are presented including moments, hazard rate, reversed hazard rate, mean residual life and mean inactivity time functions, among others. It is also shown that the distributions of the new model are ordered with respect to the strongest likelihood ratio ordering. The method of moment and maximum likelihood estimation are used to estimates the unknown parameters. Simulation is utilized to calculate the unknown shape parameter and to study its properties. Finally, to illustrate the concepts, the appropriateness of the new model for real data sets are included.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.722-727
• /
• 2004

The gear that is used in various mechanical components occurs easily damages due to the repeated torque and the high oil temperature. The main failure mode of the gear is the surface deterioration with the tooth surface fatigue. Therefore, the life evaluation and the failure analysis of the gear were very important since it may cause fatal damage of entire gear box system. In this paper, the failure mechanism and the life of the gear were evaluated using the durability analysis simulator such as MSC.FATIGUE. Moreover, the reliability analysis model of the spur gear with the accelerated life testing technique was proposed.