• 펄프종이기술
• /
• 제39권5호
• /
• pp.52-57
• /
• 2007

Corrugated fiberboard is a representative packaging material because of high compressive strength and stiffness in spite of light weight. The flutes of corrugated fiberboard are various depending on the height and the number per unit length of flute. The corrugated fiberboard with microflute like E, F or G with low height less than 1.5 mm has developed. Because it has some advantages including higher stiffness and lower requirement of fiber than carton board, it has a possibility to replace folding box board. Its consumption has been increased with the various applications like graphic packaging. As microflute has the different geometry from other conventional flutes, it can show the different behavior in testing and it may require a new testing method. In this study, we evaluated the edgewise compressive strength of the corrugated fiberboard with microflute according to ISO and other standard test methods. And the effect of specimen shape and platen compression rate was examined. From this study, we found that ISO methods was suitable and reasonable methods for corrugated fiberboard with microflute.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.494-499
• /
• 2007

The thermal reliability of the closed-type BLDC motor for the high speed axial fans is analyzed by a numerical method in this dissertation. Since the module and the motor part are combined in a closed case, the heat generated from a rotor in the motor and the electronic components in the PCB module can not be effectively removed to the outside. Therefore the module will easily fail by high temperature. The accelerated-life testing was accomplished to formulate the life equation and numerical method is used to predict the inside temperature of the PCB module, which is one of the life equation parameter according to the environment. The experiment for measuring the surface heat flux of the electronic components is carried out to apply the boundary condition of numerical study. When the environment temperature of BLDC motor is 21, 35 and $50^{\circ}C$, the temperature in the PCB space is predicted as 73.4, 87.5 and $102.4^{\circ}C$. Then the life time with the temperature are calculated as 2,239, 863 and 328.

• 한국안전학회지
• /
• 제29권1호
• /
• pp.7-14
• /
• 2014

Inverter module, which feeds the converted power to the traction motor for EMU. Consists of the power semiconductors with their gate drive unit(GDU)s and the control computer for driving, voltage, current and speed controls. Electrolytic condenser, connected to the gate drive unit and a core component to drive the power semiconductor, has problems such as reduction in lifetime and malfunction caused by electrical and mechanical characteristic changes from heat generation during high speed switching for generation of stable power. In this study, To check the service life of electrolytic condenser, the test was carried out in two ways. First, In the case of accelerated life testing of condenser, the Arrhenius model is a way of life testing. Another way is to analyze the reliability of the failure data by the method of parametric data analysis. Eventually, life time by accelerated life test than a method of failure data analysis(Weibull distribution) was found to be slightly larger output.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.30-34
• /
• 2008

To evaluate the mechanical properties of in-service materials, tensile properties measurement using small-scaled specimen has been carried out. Tensile testing specimens with various dimensions, including standard and sub-size specimen specified in ASTM and ISO and small-scaled specimen, were prepared. Tensile strain in small-scaled specimen was measured using micro-ESPI system set up in this study. This system was used in the specimen with the parallel length of 2 mm and in subsequently measuring the strain under tensile loading. From each type of tensile specimen, stress-strain curves were determined. The dimension effect of the tensile properties was investigated comparing the tensile results obtained from standard specimens and small-scaled specimens. It was shown that the tensile strength for the small-scaled specimen is lower by 15% than those for the standard specimen.

• 대한금속재료학회지
• /
• 제50권8호
• /
• pp.583-589
• /
• 2012

This work is concerned with a statistical approach to the life prediction on irradiation-assisted stress corrosion cracking (IASCC) of stainless steel (SS) for core internals of a pressurized water reactor (PWR). The previous results of the time-to-failure of IASCC measured on neutron-irradiated stainless steel components were statistically analyzed in terms of stress and irradiation. The accelerating life testing model of IASCC of cold worked Type 316 SS was established based on an inverse power model with two stress-variables, the applied stress and irradiation dose. Considering the variation of the yield strength and applied stress with the irradiation dose in the model, the remaining life of the baffle former bolt was statistically predicted during operation under complex environments of stress and irradiation.

• 항공우주시스템공학회지
• /
• 제16권5호
• /
• pp.94-101
• /
• 2022

본 논문에서는 해외수출용 유도무기체계에 탑재되는 MEMS 관성측정기의 특성과 탑재되는 유도무기체계의 운용 환경 분석을 통해서 신뢰성 입증을 위한 관성측정기 가속계수를 도출하고, 이를 기반으로 관성측정기 수명 시험을 설계하였다. 또한 설계된 수명 시험을 토대로 관성측정기 3조에 대한 수명 시험 수행을 통해 12년의 목표 수명을 입증하였다.

• 대한안전경영과학회지
• /
• 제26권1호
• /
• pp.39-44
• /
• 2024

In order to prevent accidents via defective ammunition, this paper analyzes recent research on ammunition life prediction methodology. This workanalyzes current shelf-life prediction approaches by comparing the pros and cons of physical modeling, accelerated testing, and statistical analysis-based prediction techniques. Physical modeling-based prediction demonstrates its usefulness in understanding the physical properties and interactions of ammunition. Accelerated testing-based prediction is useful in quickly verifying the reliability and safety of ammunition. Additionally, statistical analysis-based prediction is emphasized for its ability to make decisions based on data. This paper aims to contribute to the early detection of defective ammunition by analyzing ammunition life prediction methodology hereby reducing defective ammunition accidents. In order to prepare not only Korean domestic war situation but also the international affairs from Eastern Europe and Mid East countries, it is very important to enhance the stability of organizations using ammunition and reduce costs of potential accidents.

• 한국도로학회논문집
• /
• 제9권4호
• /
• pp.11-20
• /
• 2007

본 논문에서는 포장가속시험기를 이용하여 아스팔트 안정처리층의 피로모형을 개발하여 기존의 실내실험결과와의 상관관계를 분석하였다. 아스팔트 안정처리층의 피로모형은 Miner(1945)의 누적파손(Cumulative Damage)가설을 적용하였다. 포장가속시험에 사용된 아스팔트 안정처리층은 골재최대입경 25mm(BB-3)의 재료를 사용하였다. 포장가속시험결과 피로모형의 변수인 포장하부의 최대인장응력은 하중재하회수가 증가할수록 증가하는 것을 알 수 있었으며 포장층의 탄성계수는 점차 작아지는 것을 알 수 있었다. 아스팔트 피로모형의 기본식 $N_f=k_1(\frac{1}{\epsilon})^{k_2}$에서 변형률계를 통하여 얻은 인장변형률을 통하여 $k_1=1.29{\times}10^{-6}$, $k_2=3.02$의 값을 도출하였으며, 같은 인장변형률에서의 피로수명은 실내실험을 통한 모형보다 크게 나타났다. 또한, 비파괴실험인 FWD를 이용하여 포장의 잔존수명을 추정하는 논리를 개발하였다.

• 소성∙가공
• /
• 제27권6호
• /
• pp.370-378
• /
• 2018

Cold forging, carried out at room temperature, leads to high dimensional accuracy and excellent surface integrity as compared to other forging methods such as warm and hot forgings. In the cold forging process, WC-Co (Tungsten Carbide-Cobalt) alloy is the mainly used material as a core dies because of its superior hardness and strength as compared to other structural materials. For cold forging, die life is the most significant factor because it is directly related to the manufacturing cost due to periodic die replacement in mass production. To investigate die life of WC-Co alloy for cold forging, mechanical properties such as strength and fatigue are essentially necessary. Generally, uniaxial tensile test and fatigue test are the most efficient and simplest testing method. However, uniaxial tension is not efficiently application to WC-Co alloy because of its sensitivity to alignment of the specimen due to its brittleness and difficulty in thread machining. In this study, shape of specimen, tools, and testing methods, which are appropriate for uniaxial tensile test for WC-Co alloy, are proposed. The test results such as Young's modulus, tensile strength and stress-strain curves are compared to those in previous literature to validate the proposed testing methods. Based on the validation of test results it was concluded that the newly developed testing method is applicable to other cemented carbides like Titanium carbides with high strength and brittleness, and also can be utilized to carry out fatigue tests for further investigation on die life of cold forging.

• 세라미스트
• /
• 제10권5호
• /
• pp.108-116
• /
• 2007