• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.362-364
• /
• 2005

In abroad, thousands of generator testing were accomplished because of importance about generator stability parameters. But it was introduced TWBP and processing in Korea. In addition to, related rules of generator testing had been weaken. Without guidelines, practical uses are much limited. So, it studied compliance life cycle about generator facility parameters for stability analysis. This paper presents security scheme and working rules using generator testing and disturbance recordings, considering domestic circumstance.

• Journal of Korean Society for Quality Management
• /
• v.23 no.1
• /
• pp.15-28
• /
• 1995

We consider a step-stress life testing which is devised for a two-component parallel system with considerably long life time. To describe such a system, we use an exponential distribution as the survival function. The lift distribution is assumed between the log mean life time and the stress with the cumulative exposure model. The criterion for optimality is to minimize the sum of the variances of the maximum likelihood estimators of the mean life times of each part under the normal stress.

• Journal of Applied Reliability
• /
• v.11 no.2
• /
• pp.127-140
• /
• 2011

This paper presents an accelerated life test of aviation taxiway lights installed in the airport to help safe navigation of airplanes at night or in bad weather. Recently halogen lamps of taxiway lights are replaced by LED ones and their reliability needs yet to be verified. Thus, effective test conditions are designed reflecting the failure modes and mechanisms from the previous studies on LED, which include the accelerated degradation process. The test is performed under the temperature $70^{\circ}C$ and $90^{\circ}C$ for two types of LED lights, taxiway center line lights(TCLL) and taxiway edge lights (TEDL). The failure time data were analyzed using lognormal distribution and Arrhenius model to find the life-stress relationship, acceleration factor and life characteristics under the normal condition temperature $30^{\circ}C$.

• Journal of Korean Society for Quality Management
• /
• v.25 no.2
• /
• pp.15-27
• /
• 1997

This paper describes a highly accelerated life test (HALT, USPCBT) method for rapid qualification testing of STH PWB(Silver Through Hole Printed Wiring Boards). This method was carried out to be an alternative to the present time-consuming standard 1344 hours life testing(THB). The accelerated life test conditions were $121^{\circ}C$/95%R.H. at 50V bias and without bias. Their results are compared with those observed in the standard 1344 hours life test at $40^{\circ}C$/95%R.H. at 50V bias and without bias. The studies were focused on the samples time-to-failure as well as the associated conduction and failure mechanisms. The abrupt drop of insulation resistance is due to the absorption of water vapour. And the continuous drop of insulation resistance is due to the Ag migration. The ratios of time-to-failure of HALT(USPCBT) to THB were 25 and 11 at 50V bias and without bias respectively.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.5
• /
• pp.58-63
• /
• 2018

Recently in weapon systems development, the importance of reliability has been emphasized due to the increase in complexity and the rapid development of key components and components. Accordingly, the importance of lifespan testing is increased. However, lifespan testing to verify the reliability of a system is costly and takes a lot of time. Therefore in this paper, it was demonstrated that the most critical item of a bladder type accumulator is the bladder. Fatigue life is sensitive to temperature and pressure, with temperature having more impact. The fatigue life of the bladder was estimated to be 18,140 hr through fatigue analysis, which satisfies the required life expectancy of 10,000 hr.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.2
• /
• pp.223-231
• /
• 1986

During the past decade, the Quick Tool-Life Testing Method has been studied. However, a generalized theory and testing method for the quantitative measurement of tool wear have not been developed yet. Among many factors to affect the tool wear, the flank wear is regarded as a main factor. In this study, the behavior of the flank wear for carbide tool was studied as a preceding step to present a simple method for Quick Tool-Life Testing, and it was found that the flank wear varies in direct proportion to cutting time, and the following general equation is obtained for the flank wear curves with respect to cutting time and velociety.

• Journal of Korean Academy of Nursing
• /
• v.33 no.3
• /
• pp.414-424
• /
• 2003

Purpose: The purpose of this study was to develop elderly meaning in life scale with high validity and reliability. Method: The process of development of this scale were as follows. A conceptual framework composed of 4 phases of meaning in life of elderly was identified based on the literature review and interviews with elderlies and discussion with experts in meaning in life. Total 62 items, 4-points scale were developed. Through reliability testing, factor analysis, 40 preliminary items were selected. By means of internal consistency of 40 items, 2 items whose inner-items correlation coefficient was below .30 were deleted. Through factor analysis 1 item whose factor loading was below .30 was deleted. Finally 37 items were remained. To verify 37 items, factor analysis, reliability testing, LISEREL were done. Data were collected from 320 elderly subjects in Busan-KyungNam and Jeonla Province from May to June in 2002. SPSS WIN. 10.0 Program was used. Result: The result of factor analysis of 37 items, 8 factors were extracted. These factors were labeled as ‘self- awareness and self-acceptance’, ‘contentedness with life’, ‘purpose in life’, ‘love in family’, ‘role awareness’, ‘futuristic aspiration’, ‘commitment’, and ‘experience of love’. These factors included 4 phases of the meaning in life. Cronbach's Alpha of 37 items was .908 and correlation coefficient of PIL was .75. Conclusion: The researchers recommend the follows: The explorative study on the variables related to meaning in life are needed for criterion validity of this scale. The studies on meaning in life of different age groups, subjects are needed for reverification.

• Food Science of Animal Resources
• /
• v.38 no.6
• /
• pp.1216-1225
• /
• 2018

Shelf-life is defined as the amount of time during which a food product retains its desired sensory, chemical, and physical characteristics while remaining safe for consumption. The food industry needs to rapidly obtain the necessary information for determining the shelf life of its products. Here we studied the approaches available for conducting accelerated shelf-life tests. Accelerated shelf-life testing is applied to a variety of products to rapidly estimate change in characteristics with time. The aim of this work was to use accelerated shelf-life testing to study the changes in pH, microbiology, and sensory characteristics of ice cream by the application of a kinetic approach and, based on the observations, to estimate its shelf life. As per the current law, there is no shelf life on ice cream. Our results suggest that the shelf life of an ice cream sample was 24.27 months at $-18^{\circ}C$, 2.29 months at $-6^{\circ}C$, 0.39 months at $-1^{\circ}C$, and 0.15 months at $4^{\circ}C$. Results of this study suggest that a set expiration date on ice cream might also contribute to effective management of ice cream characteristics in the retail chilled chain.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.4
• /
• pp.49-54
• /
• 2012

In this paper, a software policy considering testing time and the number of errors corrected is presented. The software is tested until a specified testing time or the time to a specified number of errors are corrected, whichever comes first. The model includes the cost of error correction and software testing during the testing time, and the cost of error correction during operation. It is assumed that the length of software life cycle has no bounds, and the error correction follows an non-homogeneous Poisson process. An expression for the total cost under the policy is derived. It is shown that the model includes the previous models as special cases.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.511-516
• /
• 2001

Recently small punch creep testing (or miniature disc bend creep test) has received much attention through European collaborative research projects. This method was considered as a substitute for the conventional creep rupture testing by which the residual creep life is measured from the specimen taken out from serviced components of high temperature plants. It would be beneficial if the material creep properties such as power law creep constants as well as the creep rupture life can be measured from the small punch creep test. In this paper a method of assessing creep constants from the small punch creep testing is proposed. Finite element analyses were performed to investigate evolution of stress and strain rate at the weakest locations of the small punch creep specimen. Elastic-plastic-secondary creep analyses were carried out. The estimation equations for creep constants by the small punch creep testing are proposed based on the finite analysis results. Small punch creep tests were also performed with 9Cr steel and the accuracy of the proposed equation was verified by the experimental results.