• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.2
• /
• pp.120-130
• /
• 2007

A oxygen generating closed-circuit SCBA for escape from fire will be newly developed and then a program for estimating service time for it should be required. A SCBA made on an experimental basis consisted of five components such as half facepiece (mask), $KO_2$ box, oxygen reservoir, $CO_2$ remover and hood. The half mask had a good fitting performance since fit factors for 10 subjects were all above 100. It was found that height of subjects should be the best variable to estimate service time. Measured service time was inversely correlated with height of subjects. Service life time could be estimated by interpolation and extrapolation using inverse relationship between height and measured service time, for example, 28 minutes for male and female of 170 cm during resting, 10 minutes at the walk of 4 km/h and 5 minutes at the walk of 6 km/h considering safety margin of 20%. The study implies that program for estimating service time for the SCBA should require subject's height, speed of walk (4 km/h and 6 km/h) and fit testing. Considering safety margin, selecting younger subjects would be better. The study on the number of subjects and selecting facial dimensions should be more needed for the final program.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.10-18
• /
• 2016

RC(Reinfored Concrete) structures exposed to carbonation in urban city have durability degradation with extended service life and cracks in concrete causes a local accelerated carbonation. In the present work, crack effect on carbonation depth is investigated and the service life of RC structure is evaluated considering cracks from early age and time-dependent cracks based on the previous field investigation. DFP(Durability Failure Probability), safety index, and the related service life are calculated considering the time to crack width reaches to maximum crack width(0.3mm). The results with time effect on crack width show lower DFP and longer service life, which seems to be reasonable compared with conservative results from crack effect from initial stage. Furthermore, crack effect is evaluated to be insignificant on DFP and service life. The technique with time-dependent crack effect on carbonation can be effectively used for RC structure containing cracking in use.

• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.110-114
• /
• 2003

In this study is proposed the advanced elasto-plastic analytical method which can identify complex structural behaviors on the splice part of steel structures such as sliding and plastic contact problem between splice plates and blots. Compliated boundary conditions and various manufacturing defects are considered in various analytical cases. In the design or repair phase the plastic behavior and ultimate strength of splice parts should be very carefully verified to extend the service life of steel structures.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.64-65
• /
• 2013

Recently, people are concerned about how to maintain structure well because of safety. For effective maintenance of the structure, it should be resolved about carbonation, Durability, and Service Life issues. Solving that problem will Increase Safety of Structure. The carbonation velocity is produced an effect on carbon dioxide density of surrounding near structures, the concrete quality Therefore, This study compares the Velocity of carbonation due to maintenance of the structure. Also, this study will find Service Life of Concrete Structure through Predicting Carbonation Depth.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.181-188
• /
• 2022

The purpose of this study is to identify selection attributes, functional benefits, psychological benefits, and values according to crossover shopping patterns (showrooming and webrooming). To achieve objectives of this study, a survey was designed based on the means-end chain theory, using the in-depth laddering technique and APT laddering technique which understanding the linkage of A(attributes)-FB(functional benefits)-PB(psychological benefit)-V(value). These two laddering techniques were used to construct a hierarchical value map (HVM) by linking selection attributes, functional benefits, psychological benefits, and value levels. The selection attribute items that showrooming shoppers consider important are 'price conformity', 'product information', 'product variety', and 'delivery service'. Functional benefit items were 'free purchase', 'economic benefit', 'communication', 'safety', and 'accurate Information', and psychological benefit items were 'convenience', 'relaxation', 'pleasure', 'rational consumption', and 'stability'. Finally, the value items were 'self-satisfaction', 'abundant life', 'achievement', 'happiness', and 'reasonable life'. Next, the selection attribute items that webrooming shoppers consider important are 'price conformity', 'product information', 'product variety', 'AS', 'shopping atmosphere', and 'seller service'. Functional benefit items were 'free purchase', 'economic profit', 'expression opinion', 'safety', and 'accurate information', and psychological benefit items were 'convenience', 'relaxation', 'rational consumption', and 'stability'. Finally, the value items were 'self-satisfaction', 'abundant life', 'happiness', and 'reasonable life'.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.1
• /
• pp.157-172
• /
• 2019

The purpose of this study was to explore the moderating effect of food safety scandals on the relationship between food company's Corporate Social Responsibility(CSR) engagement at different levels and brand image in the Chinese dairy company context. In addition, this study also examined the mediating effect of brand image on CSR engagement and consumer loyalty. The study adopted a $2{\times}2$ between-subjects experimental design using scenarios. Four scenarios provided a mixed combination of yes or no cases for food safety scandal, and high or low cases for a dairy company's CSR engagement. In this study, survey was used to collect data from Chinese consumers. Of these, 377 valid data were collected from a sample of average Chinese consumers over the age of 20, collected through the internet. The results show that CSR engagement at different levels has a significant effect on brand image and food safety scandal has a significant moderating effect on the relationship between the two. This study expanded the previous study on the sensitivity of consumers to CSR activities in eastern China. At the same time, according to the results of the study, different CSR engagement of food enterprises does have a significant impact on brand image and consumer loyalty. In particular, high CSR engagement reduces negative impact on brand image through the moderating effect of food safety scandals. Therefore, for food business managers, actively participate in CSR activities, and actively enhance the engagement has a significant influence on the management of brand image.

• Journal of the Korean Society of Safety
• /
• v.17 no.2
• /
• pp.63-68
• /
• 2002

Life Cycle Cost analysis technique is introduced to evaluate cost-effectiveness of two paint systems of steel bridges. The systems are a conventional paint system and a galvanized paint system. The all costs during safe lift such as initial cost repainting costs, disposal costs are considered for the lift cycle cost analysis. The NIST model is used and BridgeLCC 1.0 developed by the NST is utilized as the lift cycle cost analysis tool. It is concluded that, in spite of expensive initial cost, the durable paint system may be cost-effective compared with conventional paint system.

• Computers and Concrete
• /
• v.12 no.6
• /
• pp.755-774
• /
• 2013

Considering the well known environmental issues of cement manufacturing (direct and indirect levels of $CO_2$ emissions), clinker replacement by supplementary cementing materials (SCM) can be a very promising first step in reducing considerably the associated emissions. However, such a reduction is possible up to a particular level of SCM utilization, influenced by the rate of its pozzolanic reaction. In this study a (4-step) structured methodology is proposed in order to be able to further adjust the concrete mix design of a particular SCM, in achieving additional reduction of the associated levels of $CO_2$ emissions and being at the same time accepted from a derived concrete strength and service life point of view. On this note, the aim of this study is twofold. To evaluate the environmental contribution of each concrete component and to provide the best possible mix design configuration, balanced between the principles of sustainability (low environmental cost) and durability (accepted concrete strength and service life ). It is shown that such a balance can be achieved, by utilising SCM by-products in the concrete mix, reducing in this way the fixed environmental emissions without compromising the long-term safety and durability of the structure.

• Journal of Family Resource Management and Policy Review
• /
• v.20 no.1
• /
• pp.43-60
• /
• 2016

The purpose of this study was to investigate what life safety services the elderly living alone in rural areas need and to propose the life safety services that they actually need. The research subjects were 1,000 people aged 65 years and over living in the rural areas of Korea. Among the total 1,000 respondents, 283 elderly people who did not live together with their married children were included in this study. Data were analyzed through frequency analysis, descriptive statistics, and multiple regression analysis. The results of this study were as follows. First, the needs of health care services and vehicle support services (when the elderly went to the hospital or walked out) were high. These were services related to health, which means that the health of the elderly is not good and that they are interested in health. Of course, it is important to treat the disease. However, it is more important to prevent disease and maintain health. An expansion of these services is urgently needed. Second, the need for life safety services was affected by the frequency of contact with neighbors, uncomfortable housing, exercise, the frequency of contact with children, gas accidents, and nutrition variables. Through this analysis, we propose to include the housing improvement service, nutrition improvement services, and expanding social relations services in the life safety services.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.20 no.2
• /
• pp.17-26
• /
• 2014

Purpose: This study tries to explore and analyse Service Attached Elderly Housing of Japan in order to prepare new elderly housing type effectively for aged society of Korea. Service Attached Elderly Housing was introduced in 2011 and it includes existing elderly housing of Japan such as Designated Elderly Housing, Elderly Friendly Housing and Superior Elderly Housing. Methods: Historical transition of Japanese elderly housing and background of the introduction of Service Attached Elderly Housing have been reviewed first. Thereafter research team visited to 3 elderly housings of Japan providing elderly services such as elderly care, meal, cleaning, washing, safety check, entertainment, etc. Based on the literature survey and field trip, the characteristics of Service Attached Elderly Housing have been drew out. Results: As the characteristics of Service Attached Elderly Housing of Japan, mixed use facility, community based housing, generation mix, barrier free design, and provision of daily life service for the elderly have been identified. Implications: Not only physical consideration including Universal Design but also elderly services such as elderly care, meal, housework, safety check, entertainment and so on are necessary for the supply of elderly housing.