• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2005년도 학술발표대회 논문집
• /
• pp.75-82
• /
• 2005

In this paper, accelerated life testing(ALT) method and procedures for a are developed and applied to assess the reliability of the product. Relay is a device that can open and close the electric circuit electrically and is used for protecting and controlling the load. In this study, an accelerated life test method for predicting the mechanical life of a relay is developed using the relationship between stresses, failure mechanism and life characteristics of products. Using the ALT method, we performed life tests and analyzed the tests results. The proposed method and procedures may de extended and applied to testing similar kinds of products to reduce test times and costs of the tests remarkably.

• 산업경영시스템학회지
• /
• 제37권2호
• /
• pp.70-76
• /
• 2014

In industrial situation, electronic and electro-mechanical systems have been using different type of batteries in rapidly increasing numbers. These systems commonly require high reliability for long periods of time. Wider application of battery for low-power design as a prime power source requires us knowledge of failure mechanism and reliability of batteries in terms of load condition, environment condition and other explanatory variables. Battery life is an important factor that affects the reliability of such systems. There is need for us to understand the mechanism leading to the failure state of battery with performance characteristic and develop a method to predict the life of such battery. The purpose of this paper is to develope the methodology of monitoring the health of battery and determining the condition or fate of such systems through the performance reliability to predict the remaining useful life of primary battery with load condition, operating condition, environment change in light of battery life variation. In order to evaluate on-going performance of systems and subsystems adopting primary batteries as energy source, The primitive prototype for performance reliability analysis device was developed and related framework explained.

• 한국인공지능학회지
• /
• 제10권2호
• /
• pp.7-11
• /
• 2022

OLED displays cannot be used permanently due to burn-in or generation of dark spots due to degradation. Therefore, the time when the display can operate normally is very important. It is close to impossible to physically measure the time when the display operates normally. Therefore, the time that works normally should be predicted in a way other than a physical way. Therefore, if you do computer simulations based on artificial intelligence, you can increase the accuracy of prediction by saving time and continuous learning. Therefore, if we do computer simulations based on artificial intelligence, we can increase the accuracy of prediction by saving time and continuous learning. In this paper, a dataset in the form of development from generation to diffusion of dark spots, which is one of the causes related to the life of OLED, was generated by applying the finite element method. The dark spots were generated in nine conditions, such as 0.1 to 2.0 ㎛ with the size of pinholes, the number was 10 to 100, and 50% with water content. The learning data created in this way may be a criterion for generating an artificial intelligence-based dataset.

• 농업과학연구
• /
• 제47권4호
• /
• pp.753-767
• /
• 2020

The commercial value of strawberries is affected by various factors such as their shape, size and color. Among them, size determined by weight is one of the main factors determining the quality grade of strawberries. In this study, image technology was developed to predict the weight of strawberries using the shape characteristics of strawberry cultivars. For realtime weight measurements of strawberries in transport, an image measurement system was developed for weight prediction with a charge coupled device (CCD) color camera and a conveyor belt. A strawberry weight prediction algorithm was developed for three cultivars, Maehyang, Sulhyang, and Ssanta, using the number of pixels in the pulp portion that measured the strawberry weight. The discrimination accuracy (R2) of the weight prediction models of the Maeyang, Sulhyang and Santa cultivars was 0.9531, 0.951 and 0.9432, respectively. The discriminative accuracy (R2) and measurement error (RMSE) of the integrated weight prediction model of the three cultivars were 0.958 and 1.454 g, respectively. These results show that the 2D imaging technology considering the shape characteristics of strawberries has the potential to predict the weight of strawberries.

• 한국멀티미디어학회논문지
• /
• 제25권3호
• /
• pp.510-518
• /
• 2022

This paper confirmed the technical reliability of mobile-based sarcopenia prediction and monitoring system. In implementing the developed system, we designed using only sensors built into a smartphone without a separate external device. The prediction system predicts the possibility of sarcopenia without visiting a hospital by performing the SARC-F survey, the 5-time chair stand test, and the rapid tapping test. The Monitoring system tracks and analyzes the average walking speed in daily life to quickly detect the risk of sarcopenia. Through this, it is possible to rapid detection of undiagnosed risk of undiagnosed sarcopenia and initiate appropriate medical treatment. Through prediction and monitoring system, the user may predict and manage sarcopenia, and the developed system can have a positive effect on reducing medical demand and reducing medical costs. In addition, collected data is useful for the patient-doctor communication. Furthermore, the collected data can be used for learning data of artificial intelligence, contributing to medical artificial intelligence and e-health industry.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.6-10
• /
• 2013

The Heat Recovery Steam Generator(HRSG) is a device recycling the exhaust gas of gas turbine in combined power and chemical plants. Since service temperatures was very high, the damage of HRSG tubes intensively occurred in superheater and reheater. The aim of this paper is to determine life and hardness relationship that addresses creep-rupture test and creep-interrupt test in modified 9Cr-1Mo steel. The measured life that consists of function of hardness was found to constant tendency.

• 한국인터넷방송통신학회논문지
• /
• 제9권3호
• /
• pp.123-129
• /
• 2009

유비쿼터스 홈은 가정 내의 다양한 가전기기 및 센서들로 구성된 유무선 네트워크를 통해 u-Life, u-Health등의 다양한 유비쿼터스 서비스를 제공하는 미래의 디지털 가정환경으로 부상하고 있다. 유비쿼터스 홈서비스는 센서들로부터 수집된 정보를 통해 사용자의 상황을 자동으로 인지하여 가전기기들을 상황에 맞게 적응하도록 함으로써 사용자 편의성을 극대화 한다. 이러한 상황인지 홈 환경에서 집안을 미리 사용자가 원하는 상태로 조절하기 위해 사용자의 미래 행위를 예측하는 것을 미래 유비쿼터스 홈에 가장 핵심적인 기능 중 하나이다. 본 논문은 유비쿼터스 홈 환경에서 상황인지 서비스를 위한 단계적 예측 알고리즘을 제안한다. 본 알고리즘은 예측과 실행의 두 단계로 이루어 진다. 첫 번째 예측단계에서 트리구조를 이용하여 사용자가 이동할 다음 위치를 예측하고, 두 번째 실행 단계에서는 테이블 매칭 방법을 이용하여 각각의 위치에 있는 가전기기들을 사용자가 원하는 대로 미리 예측하고 구동시켜 사용자에게 서비스를 제공할 수 있도록 설계하였다. 일반적으로 가전기기들은 한 개씩 독립적으로 동작하기보다 여러 기기가 함께 동작하여 특정 목적에 이용된다는 점에 착안하여, 모드서비스 개념을 도입함으로써 사용자가 동작시키고자 하는 기기들을 한꺼번에 예측할 수 있는 장점을 가진다. 또한 시뮬레이션을 통해 본 논문이 제안한 단계적 예측 알고리즘의 성능을 검증한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.199-200
• /
• 2016

Accurate fire diagnoses are needed to properly repair and strengthen buildings affected by fire. The current diagnosis method of fire takes time and is ineffective. In previous research, Melting point temperature of each sequence to grasp easily the temperature of the concrete up to 200 ~ 600 ℃ was to estimate the temperature by utilizing a different sequence representing material.But In the form of conventional hydrothermal temperature prediction simple measuring device, it is difficult in the future buried in application to the construction site, there is a problem of damage when concrete pouring, and only the extension of life measured by the zinc has a problem does not distinguish between 400 ℃ and 500 ℃. Therefore this study is conducted by utilizing a titanium metal changes the color depending on the temperature to check for the applicability of the simple apparatus for measuring the temperature prediction sequence.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.677-684
• /
• 2004

Plastic and creep deformations of solder joints during thermal cycling are the main factors of misalignments and power losses in optical telecommunication components. Furthermore, the increased mismatch between solder Joint-bonded areas may cause severe failure in the components. Darveaux's creep model was implemented into a finite element program (ABAQUS) to simulate creep response of solder. Based on the finite element results, thermal fatigue reliability was predicted by using various fatigue life prediction models. Also, the effects of ramp conditions, dwelling time, and solder joint-embedding materials on the reliability were investigated under the thermal cycling conditions of the Telcordia schedule (-40∼75$^{\circ}C$).

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.244-250
• /
• 1997

The mean time to failure (MTTF) expressing the mean value of the system life is a measure of system effectiveness. To estimate the remaining life of component and/or system, the dynamic mean time to failure concept is suggested. It is the time-dependent Property depending on the status of components. The Kalman filter is used to estimate the reliability of components using the on-line information (directly measured sensor output or device-specific diagnostics in the intelligent sensor) in form of the numerical value (state factor). This factor considers the persistency of the fault condition and confidence level in measurement. If there is a complex system with many components, each calculated reliability's or components are combined, which results in the dynamic MTTF or system. The illustrative examples are discussed. The results show that the dynamic MTTF can well express the component and system failure behaviour whether any kinds of failure are occurred or not.