• Journal of Microbiology and Biotechnology
• /
• 제17권11호
• /
• pp.1811-1817
• /
• 2007

Extracellular enzymes from Lentinus edodes M290 on normal woods (Quercus mongolica) and waste logs from oak mushroom production were comparatively investigated. Endoglucanase, cellobiohydrolase, ${\beta}$-glucosidase, and xylanase activities were higher on waste mushroom logs than on normal woods after 1. edodes M290 inoculation. Xylanase activity was especially different, with a three times higher activity on waste mushroom logs. When the waste mushroom logs were used as a carbon source, a new 35 kDa protein appeared. After the purification, the optimal pH and temperature for xylanase activity were determined to be 4.0 and $50^{\circ}C$, respectively. More than 50% of the optimal xylanase activity was retained when the temperature was increased from 20 to $60^{\circ}C$, after a 240 min reaction. At $40^{\circ}C$, the xylanase maintained 93% of the optimal activity, after a 240 min reaction. The purified xylanase showed a very high homology to the xylanase family 10 from Aspergillus terreus by LC/MS-MS analysis. The highest Xcorr (1.737) was obtained from the peptide KWI SQGIPIDGIG SQTHLGSGGS WTVK originated from Aspergillus terreus, indicating that the 35 kDa protein was xylanase. This protein showed low homology to a previously reported L. edodes xylanase sequence.

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.163-171
• /
• 2011

Because Japanese cedar shows lower mechanical performance, glued-laminated timber (glulam) can be a better way to utilize Japanese cedar for structural purpose. However, low yield of higher grade lamination from log makes it difficult to design structural glulam. This study was aimed to increase the yield of higher grade lamination and provide higher efficiency of manufacturing structural lamination by ultrasonic log sorting technology. Logs were sorted by an existing log grading rule regulated by Korea Forest Research Institute (KFRI). It was found that the KFRI log grading rule contributed to finding better logs in viewpoint of the volumetric yield and it can reduce the number of rejected lumber by visual grading. However, it could not identify better logs to produce higher-grade products. To find an appropriate log-sorting-method for structural products, log diameter and ultrasonic time of flight (TOF) for the log were considered as factors to affect mechanical performance of resulting products. However, it was found that influence of log diameter on mechanical performance of resulting products was very small. The TOF showed a possibility to sort logs by mechanical performance of resulting products even though a coefficient of correlation was not strong (R = 0.6). In a case study, the log selection based on the ultrasonic TOF of the log increased the yield of the outermost tension lamination (E8 or better grade, KS F 3021) from 2.6% to 12.5% and reduced LTE5 (lower than E5 grade) lamination from 43.6% to 10.3%, compared with the existing KFRI log grading rule.

• 한국가구학회지
• /
• 제20권3호
• /
• pp.198-204
• /
• 2009

Less used small diameter logs of black locust were heated at $250^{\circ}C$ for improving utilization. The volatile compounds emitted by the heated logs were analyzed. Their effect of formaldehyde absorption was evaluated with PB. Ester and acid compounds were dominant in content. Especially, methyl acetate and acetic acid showed the highest contents. The total content of aromatic compounds decreased as heating time increased. Amoung ketone compounds, The contents of 2-propanone, 2-pentanone, 3-petanone, 3-hexanone and cyclopentenone decreased with the increase of heating time, but the others did not. The contents of the chemicals, furfural and 3-pentanol, increased with heating time, while that of 2-methyl butanal decreased. It was hard to say that formaldehyde was absorbed by the heated black locust samples. Some decorative goods were designed with the heated logs.

• Journal of the Korean Wood Science and Technology
• /
• 제33권3호통권131호
• /
• pp.38-44
• /
• 2005

소나무, 낙엽송 및 잣나무 간벌재로 톱밥보드를 만든 후 소성시 승온속도와 최고온도에서 유지시간을 달리하여 우드세라믹을 제조하고 그 물성을 조사하였다. 승온속도가 빠를수록 밀도 및 두께감소율은 감소하였고 길이감소율 및 중량 감소율은 증가하였다. 최고온도에서 유지시간이 증가할수록 길이감소율 및 두께감소율은 증가하였다. 열전도성은 승온속도 $2^{\circ}C/min$와 최고온도에서 유지시간 2시간일 때의 조건으로 제조된 우드세라믹이 가장 우수하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제32권4호
• /
• pp.1-7
• /
• 2004

소나무 간벌재로 톱밥보드를 만든 후 우드세라믹을 제조하여 수지함침율 및 소성온도에 따른 우드세라믹의 표면온도의 변화를 조사하였다. 실리콘러버 히터의 표면온도가 증가함에 따라 우드세라믹의 표면온도도 빠른 속도로 증가하였으며, 히터의 설정표면온도가 70℃ 일때 수지함침율 80% 시편의 표면온도는 53.9 ℃이었으며, 소성온도 1,000℃ 조건으로 제조된 우드세라믹의 표면 온도는 54.2 ℃로 가장 높았다. 히터의 표면온도보다 우드세라믹 표면온도의 하강 속도가 느려 우드세라믹이 오랜 시간 열을 유지하고 있음을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.59-65
• /
• 2002

EYM (European Yield Model), which was adopted in NDS (National Design Specification for wood construction), has been used in Korea without any verification of the analysis of bolted wood connections. In the case of applying lumber from domestic small diameter logs, however, there are some problems with the direct application of EYM ; 1) relatively low dowel bearing strength and dimensional stability due to a large amount of immature wood, 2) effect of MC (moisture contents) on the dowel bearing strength of wood and the yield load of a bolted connection. To evaluate the strength properties of bolted connections with lumber from domestic small diameter logs, effect of MC on the dowel bearing strength of wood was investigated and double shear bolted connection tests were performed. As the MC of wood increased, the dowel bearing strength was linearly reduced, even under 19% MC, which showed that adjustment, not considered in NDS, was required. Double shear bolted connection tests indicated that effect of MC on yield load should be considered in order to determine design value.

• 한국산학기술학회논문지
• /
• 제14권12호
• /
• pp.6441-6446
• /
• 2013

스마트 폰 사용자가 증가하게 됨에 따라 스마트 폰은 가장 대표적인 개인화 기기로써 실제 생활에서의 개인의 행동에 대한 정보를 반영할 수 있다. 이러한 행동 정보로는 사용자가 자주 방문하거나 머무는 장소, 사용자가 자주 연락하는 사람, 사용자가 자주 만나는 사람에 대한 정보 등 그 밖에 여러 가지 실제 생활 정보가 반영될 수 있다. 본 연구에서는 사용자 개인의 실생활을 반영한 행동 패턴에 기반을 두고 개인 모델링 방법을 제안한다. 이 방법은 스마트폰 서비스 추천을 위하여 유용하게 사용할 수 있으며, 실험을 통하여 제안하는 방법의 유효함을 확인하였다.

• Journal of Multimedia Information System
• /
• 제6권4호
• /
• pp.303-308
• /
• 2019

The personal health record platform can store and manage medical records, health-monitoring data such as blood pressure and blood sugar, and life logs generated from various wearable devices. It provides services such as international standard-based medical document management, data pattern analysis and an intelligent inference engine, and disease prediction and domain contents. This study aims to construct a foundation for the transmission of international standard-based medical documents by mapping the diagnosis items of a general health examination, special health examination, life logs, health data, and life habits with the international standard terminology systems. The results of mapping with international standard terminology systems show a high mapping rate of 95.6%, with 78.8% for LOINC, 10.3% for SNOMED, and 6.5% when mapped with both LOINC and SNOMED.

• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.809-820
• /
• 2016

The goal of this study was to predict lamina yield from logs of different diameter for production of cross laminated timber. Log characteristics of red pine (Pinus densiflora) and Japanese cedar (Cryptomeria japonica), including diameter, length, volume, and defects were used for statistical and geometrical analyses, along with the lamina characteristics, including width, thickness, and defects. Based on the data obtained, the strong factors influencing the yield and grade of lamina from the two species were statistically evaluated. A geometrical approach was used for analysis of the yield from logs of given diameters. Statistical analysis showed that lamina yield was dependent on target lamina size but the grade of lamina was not related to any of the log characteristics. The suggested yield equations from the geometrical approach indicated an accuracy of less than 20% difference.

• 대한산업공학회지
• /
• 제34권4호
• /
• pp.460-469
• /
• 2008

Process mining aims at mining valuable information from process execution results (called "event logs"). Even though process mining techniques have proven to be a valuable tool, the mining results from real process logs are usually too complex to interpret. The main cause that leads to complex models is the diversity of process logs. To address this issue, this paper proposes a trace clustering approach that splits a process log into homogeneous subsets and applies existing process mining techniques to each subset. Based on log profiles from a process log, the approach uses existing clustering techniques to derive clusters. Our approach are implemented in ProM framework. To illustrate this, a real-life case study is also presented.