• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.291-296
• /
• 2008

For the past two decades, 3D/4D CAD research has heel mainly focused on the design and construction phase of a facility life-cycle. However, there has been a general notion that the strength of 3D/4D CAD lends itself to other phases such as planning, operation and maintenance. In this research, a 3D/4D CAD model was generated in a commercial software platform. Then, the traditional 1:fe cycle facility management procedures are reviewed to, see any possible improvement opportunity with the 3D/4D CAD model as an example. A focus group interview, in conjuction with an extensive literature review, produced the list of area where 3D/4D CAD model could significantly benefit the traditional life cycle facility practices. Finally, a questionnaire-based survey was conducted with 155 respondents to statistically verify the feasibility of 3D/4D CAD for life cycle facility management.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.791-798
• /
• 2020

The share of advanced technology in modern weapon systems are gradually increasing, and life cycle of components are shortened due to the rapid speed of technological development. On the other hand, the weapon systems have a characteristic that takes a long time in the requirement stage of weapon to the operation and maintenance stage. Due to inevitably, obsolescence of the main components for parts occurs in the acquisition phase. The obsolescence parts could cause delays in mass production schedules, and further adversely affects operational availability due to poor supply of repair parts during in the maintenance phase. However, business managers are obliged to maximize the performance while minimizing the cost of the total life cycle of the design, production, and operation stages. It is necessary to establish and implement an appropriate components and parts of life cycle management plan. In this research, we analyzed the effectiveness of parts obsolescence management through cost avoidance and total life cycle cost that can be reduced through proper parts obsolescence management.

• Korean Journal of Construction Engineering and Management
• /
• v.2 no.4 s.8
• /
• pp.127-134
• /
• 2001

Effectiveness of Just in time managing system can be obtained by removing unexpected lead-time and maintaining consistency on the physical transportation of construction resource. Construction resource management is essential on checking on load data from production of shop to field, and it is based on building resource life cycle information. In this study, production, transportation, and assembly disciplines of concrete construction should real time communications exchanging information related to shop-field with each other, Establishing information support system is an important initial step for promoting active cooperations among these resource life cycle on data flow. To achieve this, on suitable using management point, we suggest a concrete construction control model.

• Journal of Family Resource Management and Policy Review
• /
• v.16 no.1
• /
• pp.85-101
• /
• 2012

This study aims to identify the propensity to consume and housing characteristics according to life cycle as the main independent variable. It also tries to understand the consumption power and housing style of each cycle and analyze whether there are differences between each life cycle, ultimately aiming to match the propensity to consume and housing style with each cycle. For empirical analysis, on and off-line surveys of 488 people were collected and analyzed by cross analysis, factor analysis and analysis of variance. The prime research findings are as follows: First of all, factor analysis on propensity to consume showed four main sub-factors as rational consumption, conspicuous consumption, trend consumption, and status consumption. Secondly, current and preferred housing styles ranked from modern, natural, casual, classic and romantic, which proved that people are currently housed in preferred housing styles. Thirdly, in case of housing-related characteristics of life cycles, the size of the house increased as the levels progressed, and then decreased at level 6 when the children grew into adulthood. The majority of the population was paying a monthly rent, a few were leasing, and a very few owned their housing. 58% were living in apartments, but in levels 1-2, more were living in row houses and high-rise residential buildings, while in level 6 it was detached houses. Fourthly, the propensity to consume according to life cycle tended to shift from conspicuous and trend-based consumption to rational consumption as the cycles progressed. Fifthly, the preferred housing styles were modern and natural styles, regardless of life cycle. These study results can be applied to product development and marketing activities based on their accurate analysis of customers' needs, which can thus bring further customer satisfaction.

• Journal of the Korean housing association
• /
• v.19 no.4
• /
• pp.89-96
• /
• 2008

The environment has played a key role to improve the living condition and develop the industry. In building industries, we should consider the environment and mitigate the environmental affect. For mitigating the its affect, various areas of building technology have been developed and applied into filed work. In addition, the process in applying into field requires to conduct the assessment of the environmental affect and improve its applied technology. A lot of assessment methods are proposed in evaluate the building condition such as post-occupancy evaluation, life cycle management and life cycle assessment. Among these assessment methods, life cycle assessment is effectively utilized the environmental affect in building life cycle. Therefore, this paper aimed at analyzing the energy consumption and $CO_2$ emission in building life cycle, using the life cycle assessment and application of the example in apartment housing. This study shows that the maintenance and the production of building materials stage shares most of the amount of energy consumption and $CO_2$ emission and therefore plays an important role to planning the building in terms of the life cycle. Second, the other stages brings about a very small amount. It is important to decide the building shape and contents to mitigate the environmental affect in terms of material, volume, the pattern of the energy use and others.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.19-25
• /
• 2016

Engineering structures including civil infrastructures require a life-cycle cost and benefit during their service lives. The service life of a structure can be extended through appropriate inspection and maintenance actions. In general, this service life extension requires more life-cycle cost and cumulative benefit. For this reason, structure managers need to make a rational decision regarding the service life management considering both the cost and benefit simultaneously. In this paper, the probabilistic decision tool to determine the optimal service life based on cost-benefit analysis is presented. This decision tool requires an estimation of the time-dependent effective cost-benefit under uncertainty to formulate the optimization problem. The effective cost-benefit is expressed by the difference between the cumulative benefit and life-cycle cost of a deteriorating structure over time. The objective of the optimization problem is maximizing the effective cost-benefit, and the associated solutions are the optimal service life and maintenance interventions. The decision tool presented in this paper can be applied to any deteriorating engineering structure.

• Journal of Korean Society for Quality Management
• /
• v.29 no.4
• /
• pp.1-17
• /
• 2001

The characteristics of Telecommunication Industry encompass not only hardware and software but also the service aspect of them. One way to improve the industry up to the international level in terms of hardware and software as well as service aspect is to comply with tile TL 9000 standard, which was established by QUEST Forum, the group consisted of U.S. communication industry, based on the ISO 9000 Quality Management System. In this study, design, establishment, implementation, maintenance and improvement of quality system for domestic telecommunication industry are thoroughly investigated based on TL 9000 standard, with its LCM(Life Cycle Model) model and measurements. Also, Process Approach is suggested to help the industry realize the system to meet its specific needs. In addition, specific examples with the successful certification to TL 9000 standard are presented.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.112-113
• /
• 2013

For prevention of the school violence, many researchers have been conducted the studies based on crime prevention through environment design(CPTED) in the architecture planning phase. However, besides of architecture planning, the study considering the aspect of the facility management is needed during life cycle of educational facilities. In this study, the objective is to propose the effective school facility management for violence prevention based on CPTED method during life cycle of the facilities.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.04a
• /
• pp.309-322
• /
• 2007

This paper shows application guide of dependability data from the field, life cycle costing, and maintainability. Moreover, this study introduces mathematical expressions and predictions for reliability, availability and maintainability. This paper also shows compliance test procedures for steady-state availability, and application of Markov techniques.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.04a
• /
• pp.425-435
• /
• 2007

This paper presents various information technologies of software product evaluation such as process for evaluators, process for developers, and process for acquirers. This study also introduces system life cycle processes and its application guide.