• 제목/요약/키워드: LiPO

검색결과 265건 처리시간 0.028초

IT 융합 회전익 무인항공기의 자동 착륙 임무수행 (Autolanding Mission Planning of the IT Convergence Hoverable UAV)

  • 정성훈;김현수
    • 한국융합학회논문지
    • /
    • 제8권6호
    • /
    • pp.9-16
    • /
    • 2017
  • Li-Po 에너지 밀도의 기술적 진보의 한계로 회전익 무인항공기의 비행시간은 제한적이기 때문에, 연구원들은 회전익 무인항공기의 완전한 자율 임무 수행을 위하여 우회 해결책을 찾고 있다. 몇 가지 후보 해결책들 중, 자동 무선 충전이 가장 가능성 있고 현실적인 후보이며, 본 논문에서는 자동 무선 충전의 주요 기술인 자동 착륙 전략에 초점을 맞추고 있다. MATLAB/Simulink를 기반으로 Li-Po 배터리팩 시뮬레이터를 포함한 회전익 무인항공기 비행 시뮬레이터를 개발하였으며, 이를 통해 비행 상태 및 배터리팩 상태를 분석하였다. 이륙할 때 1,647 W의 최대 모터 출력이 발생하였고, 이때 셀 전압은 최소 3.39 V까지 감소하였다. 이는 22 Ah를 지니고 12S1P로 연결된 2개의 배터리팩이 자동 착륙 임무수행에 적합하다는 것을 나타낸다.

고에너지밀도 리튬전지를 위한 망간이 첨가된 LiFePO4 양극재료 (Manganese Doped LiFePO4 as a Cathode for High Energy Density Lithium Batteries)

  • 김둘선;김재광;안주현
    • 전기화학회지
    • /
    • 제16권3호
    • /
    • pp.157-161
    • /
    • 2013
  • 다공성 $LiMn_{0.6}Fe_{0.4}PO_4$ (LMFP)를 졸-겔법을 이용하여 합성하였고, 원료물질을 양론비로 혼합한 후 혼합물을 $600^{\circ}C$에서 10시간 동안 가열하여 입자 표면 전체에 전도성 탄소물질이 균일하게 형성된 LMFP을 제조하였다. LMFP의 결정구조는 리트펠트법에 의해 조사하였고, 표면구조와 기공특성은 주사전자현미경, 투과전자현미경, BET로 분석하였다. 제조된 LMFP는 표면적이 크고, 입자 표면에는 웹(web) 형태의 다공성 탄소층이 균일하게 형성되어 있는 것을 확인하였다. 상온에서 LMFP를 양극으로 사용하여 0.1 C의 전류밀도에서 초기방전용량은 152 mAh/g, 에너지밀도는 570 Wh/kg로 높았고 사이클 성능도 장기적으로 안정적이었다. 졸-겔법에 의해 제조된 LMFP는 높은 기공도와 균일한 탄소코팅에 의한 시너지효과로 이온확산이 용이하여 우수한 전기화학적 특성을 나타내었다.

전류 적산법 기반의 LiFePO4 배터리 SOC 추정 회로 구현 (Circuit Implementation for LiFePO4 Battery SOC Estimation based on the Coulomb Counting Method)

  • 전창윤;김종훈;허인녕;조보형;한승훈
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2011년도 추계학술대회
    • /
    • pp.51-52
    • /
    • 2011
  • 전류 적산법(Coulomb counting, Ampere counting)을 이용한 배터리 SOC(State of Charge) 추정 방식은 초기 SOC 값에 존재하는 오차와 SOC를 추정하는 시간동안 누적되는 전류값의 오차로 인해 추정이 실패할 수 있는 단점이 존재한다. 하지만 알고리즘이 직관적이며 단시간 내에서는 그 오차가 크지않고, 상용화된 배터리 SOC 추정 IC가 존재하여 구현이 간단하다는 장점 또한 있다. 본 논문에서는 전류 적산법 기반의 배터리 SOC 추정 IC를 사용하여 $LiFePO_4$ 리튬 폴리머 배터리의 SOC 추정 회로를 구현하는 과정을 제안한다. 또한 실험을 통해 제안된 배터리 SOC 추정 회로의 성능을 확인해본다.

  • PDF

Comparative Study of Non-Electrochemical Hysteresis Models for LiFePO4/Graphite Batteries

  • Ma, Jiachen;Xie, Jiale;Bai, Kun
    • Journal of Power Electronics
    • /
    • 제18권5호
    • /
    • pp.1585-1594
    • /
    • 2018
  • The estimation of $LiFePO_4$/graphite battery states suffers from the prominent hysteresis phenomenon between the respective open-circuit voltage curves towards charging and discharging. A lot of hysteresis models have been documented to investigate the hysteresis mechanism. This paper reviews and deeply interprets four non-electrochemical hysteresis models and some improvements. These models can be conveniently incorporated into commonly used equivalent circuit models to reproduce battery behaviors. Through simulation and experimental comparisons of voltage predictions and state-of-charge estimations, the pros and cons of these models are presented.

금속산화물 전극을 사용한 고 에너지밀도 하이브리드 커패시터 특성 (Characteristics of high energy density hybrid capacitor using metal oxide electrode)

  • 윤홍진;신윤성;이종대
    • 한국응용과학기술학회지
    • /
    • 제28권3호
    • /
    • pp.329-334
    • /
    • 2011
  • The electrochemical performances of an asymmetric hybrid capacitor were investigated using $LiFePO_4$ as the positive electrode and active carbon fibers(ACF) as the negative electrode. The electrochemical behaviors of a nonaqueous hybrid capacitor were characterized by constant current charge/discharge test. The specific capacitance using $LiFePO_4$/ACF electrode turned out to be $0.87F/cm^2$ and the unit cell showed excellent cycling performance. This hybrid capacitor was able to deliver a specific energy as high as 178 Wh/kg at a specific power of 1,068 W/kg.

보정된 개방전압 히스테리시스 기반 LiFePO4 배터리의 SOH 비교 (SOH comparison of a LiFePO4 Cell based on Modified OCV Hysteresis Curve)

  • 이동윤;김종훈;이성준
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2017년도 전력전자학술대회
    • /
    • pp.463-464
    • /
    • 2017
  • 다른 리튬계열 전지와 달리, 인산철($LiFePO_4$) 배터리는 중간 동작 영역에서 개방전압(OCV; open-circuit voltage)의 히스테리시스(hysteresis) 영역이 존재한다. 그러므로, 인산철 배터리 관리시스템, 특히 충전상태(SOC; state-of-charge)와 수명상태(SOH; state-of-health)의 정확한 모니터링을 위해서는 OCV의 정밀성이 요구된다. 본 논문에서는, 충전 및 방전 OCV-SOC의 SOC 간격에 따른 인산철 배터리의 SOH를 비교하기 위해 전기적 등가회로 모델(ECM; electrical-circuit modeling)적응제어 알고리즘 기반 실시간 내부저항(DCIR; direct current internal resistance)을 모니터링 하였다.

  • PDF

GITT 기반 LFP(LiFePO4) 배터리 분석 (An analysis of LFP(LiFePO4) battery based on GITT)

  • 윤창오;이평연;김종훈;장성수
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2017년도 전력전자학술대회
    • /
    • pp.455-456
    • /
    • 2017
  • 본 논문에서는 리튬 인산철 배터리($LiFePO_4$)의 내부 파라미터 추출 방법으로 전기화학적 기반인 정전류식 간헐적 적정 테크닉(galvanostatic intermittent titration technique;GITT)을 사용하였다. 배터리 관리 시스템(battery management system;BMS) 알고리즘의 기본적으로 들어가는 충방전 저항을 미세 구간으로 나누어 볼 수 있다. SOC(state-of-charge)에 맞는 저항 성분을 찾을 수 있고, 미소 용량 정보를 알아내어 특정 SOC 구간에서의 LFP 배터리 최적 운용 구간을 알 수 있다.

  • PDF

수열법을 이용한 $LiMnPO_4$의 충방전 특성 (Charge-discharge characteristics of $LiMnPO_4$ prepared by hydrothermal synthesis)

  • 공명철;구할본
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
    • /
    • pp.420-421
    • /
    • 2005
  • $LiMnPO_4$ particle were prepare by a hydrothermal reaction. The particles prepared by adding polyethylene glycol(PEG) and carbon to the starting reaction solution were fine crystalline in the range of 200-300nm. The discharge capacity of the sample as a lithium secondary battery was $25mAhg^{-1}$ at $0.04mAcm^{-2}$, larger than that of the sample prepared by the hydrothermal method without PEG and carbon.

  • PDF

LiFePO4 배터리의 비선형성에 따른 확장 칼만 필터 노이즈 파라미터 차등 설계 기반 SOC 추정 향상 기법 (Improvement of SOC Estimation based on Noise Parameter Differential Design of Extended Kalman Filter according to Non-linearity of LiFePO4 Battery)

  • 박진형;김재호;장민호;장성수;김종훈
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2018년도 추계학술대회
    • /
    • pp.121-122
    • /
    • 2018
  • 리튬 인산철(LFP, $LiFePo_4$) 배터리의 경우 다른 종류의 배터리에 비해 내부 파라미터가 비선형적인 단점이 있다. 일반적인 배터리 등가회로 모델을 적용 시, 비선형성으로 인해 추정 성능이 감소한다. 배터리 등가회로 모델을 기반인 확장 칼만 필터(EKF, Extended Kalman Filter)를 통해 SOC (State of Charge) 추정 시 추정성능이 감소할 수 있다. 따라서 본 논문은 LFP 배터리의 SOC 추정 성능 향상을 위해 실시간 파라미터 관측기를 통한 배터리 등가회로 모델을 기반으로 EKF의 내부 파라미터를 분석하고 이에 따른 차등 모델을 제안한다.

  • PDF

Ex-situ 7Li MAS NMR Study of Olivine Structured Material for Cathode of Lithium Ion Battery

  • Lee, Youngil;An, JiEun;Park, Seul-A;Song, HyeYeong
    • 한국자기공명학회논문지
    • /
    • 제18권2호
    • /
    • pp.63-68
    • /
    • 2014
  • $^7Li$ nuclear magnetic resonance (NMR) spectra have been observed for $LiMPO_4$ (M = Fe, Mn) samples, as a promising cathode material of lithium ion battery. Observed $^7Li$ shifts of $LiFe_{1-x}Mn_xPO_4$ (x = 0, 0.6, 0.8, and 1) synthesized with solid-state reaction are compared with calculated $^7Li$ shift ranges based on the supertranferred hyperfine interaction of Li-O-M. Ex situ $^7Li$ NMR study of $LiFe_{0.4}Mn_{0.6}PO_4$ in different cut-off voltage for the first charge process is also performed to understand the relationship between $^7Li$ chemical shift and oxidation state of metals affected by delithiation process. The increment of oxidation state for metals makes to downfield shift of $^7Li$ by influencing the supertranferred hyperfine interaction.