• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.379-380
• /
• 2010

GIS has the basic ability to process high-dense and precise digital data like LiDAR. But the software that common users can use when necessary is expensive and practically impossible for actual use. Thus this study set out to research the methodologies to process and service time series LiDAR data for landslide monitoring.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_1
• /
• pp.507-516
• /
• 2007

Segmentation and organization of the LiDAR (Light Detection and Ranging) data of the Earth's surface are difficult tasks because the captured LiDAR data are composed of irregularly distributed point clouds with lack of semantic information. The reason for this difficulty in processing LiDAR data is that the data provide huge amount of the spatial coordinates without topological and/or relational information among the points. This study introduces LiDAR data segmentation technique by utilizing histograms of the LiDAR height image data and analyzing roof shape for 3D reconstruction and visualization of the buildings. One of the advantages in utilizing LiDAR height image data is no registration required because the LiDAR data are geo-referenced and ortho-projected data. In consequence, measurements on the image provide absolute reference coordinates. The LiDAR image allows measurement of the initial building boundaries to estimate locations of the side walls and to form the planar surfaces which represent approximate building footprints. LiDAR points close to each side wall were grouped together then the least-square planar surface fitting with the segmented point clouds was performed to determine precise location of each wall of an building. Finally, roof shape analysis was performed by accumulated slopes along the profiles of the roof top. However, simulated LiDAR data were used for analyzing roof shape because buildings with various shapes of the roof do not exist in the test area. The proposed approach has been tested on the heavily built-up urban residential area. 3D digital vector map produced by digitizing complied aerial photographs was used to evaluate accuracy of the results. Experimental results show efficiency of the proposed methodology for 3D building reconstruction and large scale digital mapping especially for the urban area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.575-583
• /
• 2009

Various algorithms and methods, related to preprocessing of LiDAR data, are being developed and proposed. These methods are two ways, one of them is to use the regular form such as DSM or the image converted from raw LiDAR data, and the other is to use raw LiDAR data directly. The image processing method is one of representative method for the regular grid form data. This method is easy to apply to a numerical analysis technique and has an advantage of modeling and noise elimination through smoothing, but it lose the information during the data conversion. This study apply the image processing method to the irregular raw LiDAR data directly for the extracting ground information with minimized information loss and evaluate the extracting accuracy of ground information.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.281-292
• /
• 2014

This study examined the accuracy that produced using various types and combinations of landslide-related factors from landslide susceptibility index maps. A database of landslide-related factors was adopted by the landslide locations that obtained from aerial photographs, and the topographic factors that derived from airborne LiDAR observations and digital maps, and various soil, forest, and land cover. Landslide susceptibility index maps were calculated by logistic regression and frequency ratio from the landslide susceptibility index. The correlation between airborne LiDAR data and digital map was shown strong similarities with one another. Landslide susceptibility index maps indicated the existence of a strong correlation and high prediction accuracy, especially when the frequency ratio and airborne LiDAR were used. Therefore, we concluded that the Airborne LiDAR will contribute to the development of effective landslide prediction methods and damage reduction measures.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.281-284
• /
• 2010

Recently the development of digital based measurement sensor with which a variety of surveying equipment and methods are being developed. In the field of aerial mapping using GPS, INS and Digital Camera instead of Film based Camera. In case of aerial photogrammetry for mapping, it is effective on wide area. But it is ineffective on narrow area. Therefore, the research experimented that used LiDAR sensor based mobile mapping systems for modify and update about region of Suwon and Yeouido. From these results a possibility and an effectiveness analyzed and evaluated LiDAR sensor based mobile mapping systems.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.254-259
• /
• 2008

지형의 표고값물 격자간격으로 표현하는 수치표고모델(DEM)은 지형분석을 위한 GIS데이터 활용과 휴대전화 중계안테나의 영향권 분석, 정밀지오이드 계산을 위한 지형효과계산 등 여러 가지 분야에 활용되고 있다. 본 연구에서는 이렇게 활용성이 증가하고 있는 수치표고모델을 수집하고 또 진주시 지역을 대상으로 LiDAR촬영을 통한 LiDAR 수치표고모델을 구축하여 그 정확도를 분석하고자 하였다. 연구에 활용된 수치표고모델은 GTOPO30, SRTM-3, 지형도(1/50,000) 독취 DEM, 환경부 DEM, 항공사진에 의해 생성된 DEM, 그리고 LiDAR DEM의 6가지이며, 정확도 분석을 위해 GPS측량과 수준측량이 동시에 실시된 409점의 진주시 3차원 도시기준점 성과를 이용하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.4
• /
• pp.231-240
• /
• 2017

This paper aims to study a method to estimate precise carbon absorption by quantification of forest information that uses accurate LiDAR data, hyperspectral image. To estimate precise carbon absorption value by using spatial data, a problem was found out of carbon absorption value estimation method with statistical method, which is already existed method, and then offered optimized carbon absorption estimation method with spatial information by analyzing with methods of compare digital aerial photogrammetry and LiDAR data. It turned out possible Precise classification and quantification in case of using LiDAR and hyperspectral image. Various classification of tree species was possible with use of LiDAR and hyperspectral image. Classification of hyperspectral image was matched in general with field survey and Mahalanobis distance classification method. Precise forest resources could be extracted using high density LiDAR data. Compared with existing method, 19.7% in forest area, 19.2% in total carbon absorption, 0.9% in absorption per unit area of difference created, and improvement was found out to be estimated precisely in international code.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.4
• /
• pp.445-452
• /
• 2009

Through the Airbone LiDAR point, the study for three-dimensional modeling of the city zone has been in progress. So, deciding the Density of Airbone LiDAR point for that is very important to get a result of three-dimensional modeling of the city zone and make efficient use of airbone LiDAR. This study made the standard density to decide the optimum density of Airbone LiDAR point in the city zone. Through each standard density point of DSM and the outline of the buildings, It executed the visual evaluation and the accuracy inspection to decide the optimum density point, and presented the optimum density for the airbone LiDAR point in the city zone.

• Spatial Information Research
• /
• v.13 no.2 s.33
• /
• pp.157-166
• /
• 2005

LiDAR(Light Detection And Ranging) can make terrain model where above the ground and the mixed data between SBES(Single Beam Echo Sounder) and SSS(Side Scan Sonar) can make terrain model where bottom of water. So this research suggest that how to merge data which are got ken different devices and we developed the software which can display 2D/3D graphic and water volume calculation. And we compared accuracy between the commercial software'Surfer'and LiDAR and SBES data Merging Program.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.3
• /
• pp.155-161
• /
• 2015

Dike lines are important features for describing the detailed shapes of dikes and for detecting topographic changes on dike surfaces. Historically, dike lines have been generated using only the LiDAR data. This paper proposes a new methodology for selecting an appropriate dike line on various dike surfaces using the topographic LiDAR data and multispectral orthoimages taken in the Nakdong River basins. The fi rst baselines were generated from the given LiDAR data using the modified convex hull algorithm and smoothing spline function, and the second baselines were generated from the given orthoimages by the Canny operator. Next, one baseline was selected among the two baselines at 10m intervals by comparing their elevations, and the selected baseline at 10m interval was defined as the dike line segment. Finally, the selected dike line segments were connected to construct the 3D dike lines. The statistical results show that the dike lines generated using both the LiDAR data and multispectral orthoimages had the improved horizontal and vertical accuracies than the dike lines generated only using the LiDAR data on the various dike surfaces.