• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1261-1262
• /
• 2007

At first the $Ba_{0.5}Sr_{0.5}TiO_{3}$-MgO powder with $B_{2}O_{3}-Li_{2}CO_{3}$ were made by the Sol-Gel method. And then the thick films of BST-MgO with $B_{2}O_{3}-Li_{2}CO_{3}$ were fabricated on the $Al_{2}O_{3}$ substrates coated with Pt by the screen printing method. The structural and dielectric properties of the BST-MgO thick film with $B_{2}O_{3}-Li_{2}CO_{3}$ addition were investigated. The structure of the BST-MgO with $B_{2}O_{3}-Li_{2}CO_{3}$ thick films were dense and homogeneous with no pores. The dielectric constant and dielectric loss were increased with decreasing the $B_{2}O_{3}-Li_{2}CO_{3}$ addition ratio.

• Korean Journal of Materials Research
• /
• v.3 no.6
• /
• pp.614-623
• /
• 1993

Electrical characteristics of LiF-$Li_{2}O-B_{2}O_{3}-P_{2}O_5$ glasses with fixed $Li_2O$ content have been investigated by using AC impedance spectroscopy. Part of the total lithium ions present in these glasses contributes to conduction, and the changes in electrical conductivity with composition was inconsistent with the weak electrolyte model. The power law could not be used to determine the hopping ion concentration in these glasses. Both mobile carrier density and mobility have been modified as Li were added in the form of LiF. The formation of $(B-O-P)^-,di^-$, and metaborate group gave additional available sites for Li+ diffusion causing the enhancement of conductivity. The observed maximum conductivity was $2.43 \times 10^{-4}$S/cm at $150^{\circ}C$ at the composition containing 8mol% LiF. The decomposion potential amounted to 5.94V. The Li/glass electrolyte/$TiS_2$ solid-state cell showed open circuit voltage of 3.14V and energy density of 22 Wh/Kg at $150^{\circ}C$.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.83-90
• /
• 2017

The pyroprocessing of spent nuclear fuel generates LiCl-KCl eutectic waste salt containing radioactive rare earth nuclides. It is necessary to develop a simple process for the treatment of LiCl-KCl eutectic waste in a hot-cell facility. In this study, capture and solidification of a rare earth nuclide (Nd) in LiCl-KCl eutectic salt using an inorganic composite with a $Li_2O-Al_2O_3-SiO_2-B_2O_3$ system was conducted to simplify the existing separation and solidification process of rare earth nuclides in LiCl-KCl eutectic waste salt from the pyroprocessing of spent nuclear fuel. More than 98wt% of Nd in LiCl-KCl eutectic salt was captured when the mass ratio of the composite was 0.67 over $NdCl_3$ in the eutectic salt. The content of $Nd_2O_3$ in the Nd captured-composite reached about 50wt%, and this composite was directly fabricated into a homogeneous and chemical resistant glass waste in a monolithic form. These results will be utilized in designing a process to simplify the existing separation and solidification process.

• Journal of the Korean Ceramic Society
• /
• v.30 no.5
• /
• pp.373-380
• /
• 1993

Li2O-B2O3-P2O5 glasses with high lithium content were analysed by electrical characterization. The electrical conductivity increase with Li content and exhibits a maximum value of 1.2$\times$10-4S/cm near B2O3/P2O5=1 at 15$0^{\circ}C$. Glass transitiion temperature increased with conductivity. Concentration of charge carrier and distribution of relaxation time were independent of temperature. In this system the variation of conductivity with the composition was depend on mobility of lithium ion. Basically, it is attribute to primitive activation energy. Enhancement of conductivities was related to be formation of (B-O-P)-, di-, and metaborate group, which give additional available sites for Li+ diffusion.

• Proceedings of the KWS Conference
• /
• 1996.05a
• /
• pp.64-65
• /
• 1996

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.163.2-163
• /
• 2003

• Analytical Science and Technology
• /
• v.16 no.6
• /
• pp.443-449
• /
• 2003

Thermal neutron irradiation experiment of boric acid solution was carried out using HANARO in following three conditions: (A) $^{10}B$ concentration = $203.0{\mu}g/mL$, irradiation time = 1 hr; (B) $^{10}B$ concentration = $381.4{\mu}g/mL$, irradiation time = 1 hr; (C) $^{10}B$ concentration = $381.4{\mu}g/mL$, irradiation time = 0.5 hr. The amount of lithium produced from $^{10}B(n{\cdot}{\alpha})^7Li$ reaction which was generated on neutron irradiation, was measured by flameless atomic absorption spectroscopy. The concentration of $^7Li$ measured in the three experiments was $0.18{\mu}g/mL$ (78.3% of theoretical value, $0.23{\mu}g/mL$) in (A), $0.31{\mu}g/mL$ (70.5% of theoretical value, $0.44{\mu}g/mL$) in (B) and $0.16{\mu}g/mL$ (71.6% of theoretical value, $0.22{\mu}g/mL$) in (C). The pH value of irradiated boric acid was shifted to considerably low. It is estimated that boric acid would be transformed into the polyborate fonn, by radiolysis products of water, which has high dissociation constant.

• New & Renewable Energy
• /
• v.3 no.1 s.9
• /
• pp.54-59
• /
• 2007

A sintering aid, $B_{2}O_{3}$ have been included into a $LiAlO_{2}$ electrolyte support by a tape casting method in order to reinforce mechanical strength of the support for molten carbonate fuel cells [MCFCs). Starting idea originates from the low melting point of $B_{2}O_{3}$ ($450^{\circ}C$), which can provide the low temperature consolidation of ceramic materials. The mechanical properties and the microstructure changes of the $B_{2}O_{3}$-included electrolyte support were examined by scanning electron microscope, mercury porosimetry, X-ray powder diffraction [XRD], high temperature differential scanning calorimeter and three-point bending strength measurement. The mechanical strength was clearly improved by addition of $B_{2}O_{3}$. The increase of mechanical strength results from the neck growth of a new $LiAlO_{2}$ phase between $LiAlO_{2}$ particles by the liquid phase sintering. Average pore size and porosity of the electrolyte support reinforced by addition of the sintering aid, $B_{2}O_{3}$, was $0.24{\mu}m$ and 59%, respectively which were suitable microstructure of a matrix for an application of MCFCs.

• Journal of Sensor Science and Technology
• /
• v.12 no.1
• /
• pp.16-23
• /
• 2003

Thermoluminescent properties of $Li_2B_4O_7$ single crystal grown by Czochralski method have been investigated. The high quality $Li_2B_4O_7$ single crystal without core was obtained at rotation speed of 10 rpm for seed crystal and pulling speed below $0.18\;mm{\cdot}h^{-1}$. The structure of $Li_2B_4O_7$ single crystal was classified as tetragonal by XRD analysis. The TL glow curve was composed with three overlapped peaks which can be easily deconvoluted and the TL response of $Li_2B_4O_7$ single crystal TLD to X-ray radiation is linear within the range of $50\;mGy{\sim}1.5\;Gy$. Activation energies of three TL glow peaks analyzed by the various heating rates method and PL spectrum were 0.93, 1.78 and 2.25 eV, respectively.

• Korean Journal of Crystallography
• /
• v.9 no.2
• /
• pp.138-142
• /
• 1998

Lithium triborate, LiB3O5(Mr=119.37), 단결정을 상단 종자정 융액법으로 성장시켰으며, 결정구조를 X-선 회절법으로 연구하였다. 결정계는 사방정계이며 공간군은 Pna21(No. 33)이다. 단위포의 상수는 a=8.432(1) , b=7.364(1) , c=5.110(1) , α=β=γ=90.00o, V=317.3(6) 3, V=4, Dx=2.50 gcm-3, MoKα1, λ=0.71069 , μ=2.3/cm, F(000)=232, T=293 K 이었다. 최종 구조의 오차인자는 520개 회절 점에서 각각 R=0.0222과 wR=0.0582이었다.