• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.04a
• /
• pp.34-35
• /
• 1996

The diffusional behavior of many non-solvents in glassy or semicrystalline polymers cannot be adequately described by a concentration-dependent form of Fick's law, especially when mass transfer is coupled with structural changes. Many mathematical models have been devised to interprete non-Fickian diffusion dominated by relaxation kinetics. In formulation of non-Fickian diffusion mathematics, therefore, the most important factor to consider is how relaxation effects can influence the governing constitutive equation and boundary conditions. That is, relaxation parameters can be accommodated by variable boundary conditions or a modified continuity equation, or both, depending on specific systems and conditions (Frish, 1980). Accoring to Astarita and Nicolais (1983), the model equations can be broadly categorized as continuous or discontinuous. Continuous model equations encompass phenomena where the structural change takes place gradually over the whole volume of the polymer sample (Crank, 1953; Long and Richman, 1961; Berens and Hopfenberg, 1978). On the other hand, discontinuous model equations deal with the phenomena where the morphological change appears to be abrupt (Li, 1984). Four mathematical models with different relaxation parameters were applied to fit the anomalous sorption data observed in fluoropolymers (PVDF, ECTFE). The fitted result for PVDF-benzene sorption data is shown in Fig. 1.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.9
• /
• pp.2684-2688
• /
• 2014

Two two-dimensional cyanide- and phenoxo-bridged heterometallic M(II)-Mn(III) (M = Ni, Pd) coordination polymers $\{[Mn(saltmen)]_4[Ni(CN)_4]\}(ClO_4)_2{\cdot}CH_3OH{\cdot}H_2O$ (1) and $\{[Mn(saltmen)]_4[Pd(CN)_4]\}(ClO_4)_2{\cdot}CH_3CN{\cdot}H_2O$ (2) ($saltmen^{2-}$ = N,N'-(1,1,2,2-tetramethylethylene)bis(salicylideneaminato)dianion) have been obtained by using $K_2[M(CN)_4]$ as building blocks and a salen-tpye Schiff-base manganese(III) compound as assembling segment. Single X-ray analysis reveals their isostrutural cyanide-bridged $MMn_4$ pentanuclear cationic structure. The four Schiff base manganese units of the pentanuclear entity are self-complementary through the phenoxo oxygen atoms from the neighboring complex, therefore forming cyanide- and phenoxo-bridged 2D sheet-like structure. Investigation over magnetic susceptibilities reveals the overall ferromagnetic coupling between the adjacent Mn(III) ions bridged by the phenoxo oxygen atoms with J = 2.13 and $2.21cm^{-1}$ for complexes 1 and 2, respectively.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.2
• /
• pp.80-83
• /
• 2011

We have fabricated phosphorescent white organic light-emitting devices (WOLEDs) with a spin-coated poly(Nvinylcarbazole) [PVK] host layer. Iridium(III) bis[(4,6-difluorophenyl)-pyridinato-N,$C^{2'}$]picolinate (FIrpic), tris(2-phenylpyridine)iridium(III) [$Ir(ppy)_3$], and tris(2-phenyl-1-quinoline)iridium(III) [$Ir(phq)_3$], were used as the blue, green, and red guest materials, respectively. The PVK was mixed with FIrpic, $Ir(ppy)_3$, and $Ir(phq)_3$ molecules in a chlorobenzene solution and spin-coated in order to prepare the emission layer; 3-(4-biphenylyl)-4-phenyl-5-(4-tertbutylphenyl)-1,2,4-triazole (TAZ) was used as an electron transport material. The resultant device structure was ITO/PVK:FIrpic:$Ir(ppy)_3:Ir(phq)_3$/TAZ/LiF/Al. The electroluminescence, efficiency, and electrical conduction characteristics of the WOLEDs based on the doped PVK host layer were investigated. The maximum current efficiency of the three wavelength WOLED with the doped PVK host was 19.2 cd/A.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.753-758
• /
• 2013

Molecular dynamics (MD) simulations have been used to study the diffusion behavior of small gas molecules ($CO_2$) in polyethylene terephthalate (PET)/polylactide (PLA) blends. The Flory-Huggins interaction parameters (${\chi}$) determined from the cohesive energy densities are smaller than the critical value of Flory-Huggins interaction parameters (${\chi}_{critical}$), and that indicates the good compatibility of PET/PLA blends. The diffusion coefficients of $CO_2$ are determined via MD simulations at 298 K. That the order of diffusion coefficients is correlated with the availably fractional free volume (FFV) of $CO_2$ in the PET/PLA blends means that the FFV plays a vital role in the diffusion behavior of $CO_2$ molecules in PET/PLA blends. The slopes of the log (MSD) as a function of log (t) are close to unity over the entire composition range of PET/PLA blends, which confirmes the feasibility of MD approach reaches the normal diffusion regime of $CO_2$ in PET/PLA blends.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1003-1006
• /
• 2003

We have investigated the effect of hole-injection buffer layer and cathodes in organic light-emitting diodes u sing poly (3,4-ethylenedioxythiophene) : poly (stylenesulfonate) (PEDOT: PSS) in a device structure of $ITO/PEDOT:PSS/TPD/Alq_3/Cathode$. Polymer PEDOT:PSS buffer layer was made using spin casting method. Current-voltage, luminance-voltage characteristics and efficiency of device were measured at room temperature with a variation of cathode materials. The device with LiF/Al cathode shows an improvement of external quantum efficiency approximately by a factor of ten compared to that of Al cathode only device. Our observation shows that the energy barrier-height in cathode side is important in improving the efficiency of the organic light-emitting diodes.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.718-723
• /
• 2014

In this paper, we developed the inspection system of electric vehicle battery plate using image processing. Four cameras are used for acquiring the principal parts of the plate, and several steps of image processing for extracting significant dimensions of the plate such as widths and lengths. As a preceding step, calibration of four cameras is carried for compensating distorted images using dot-arrayed sheet. Coordinate systems for four cameras are defined where one coordinate system is assigned to the reference coordinate system to which the others are relatively described. Line information of the edge in the windowed image is extracted using elaborate edge-detection algorithm, and finally the intersection points between lines are extracted to calculate widths and lengths of the plate from which the error status of the battery plate is decided.

• Smart Structures and Systems
• /
• v.26 no.2
• /
• pp.157-174
• /
• 2020

The guided wave technique is commonly used in structural health monitoring as the guided waves can propagate far in the structures without much energy loss. The guided waves are conventionally generated by the surface-mounted piezoelectric wafer active sensor (PWAS). However, there is still lack of understanding of the wave propagation in layered structures, especially in structures made of anisotropic materials such as carbon fiber reinforced polymer (CFRP) composites. In this paper, the Rayleigh-Lamb wave strain tuning curves in a PWAS-mounted unidirectional CFRP plate are analytically derived using the normal mode expansion (NME) method. The excitation frequency spectrum is then multiplied by the tuning curves to calculate the frequency response spectrum. The corresponding time domain responses are obtained through the inverse Fourier transform. The theoretical calculations are validated through finite element analysis and an experimental study. The PWAS responses under the free, debonded and bonded CFRP conditions are investigated and compared. The results demonstrate that the amplitude and travelling time of wave packet can be used to evaluate the CFRP bonding conditions. The method can work on a baseline-free manner.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.134-140
• /
• 2017

CFRP has many industrial applications due to its low weight and high strength properties. CFRP is a composite material composed of carbon fibers embedded in a polymer matrix; it provides excellent resistance to fatigue wear, corrosion, and breakage due to fatigue. It is increasingly demanded in aircraft, automotive, and medical industries due to its superior properties to aluminum alloys, which were once considered the most suitable for specific applications. The basic machining methods of CFRP are drilling and route milling. However, in the case of drilling, the delamination of each layer, uncut fiber, resin burning, spalling, and exit burrs are barriers to successful application. This paper investigates the occurrence of exit burrs when drilling holes with ultrasonic vibration. Depending on design parameters such as the point angle, the characteristics of hole drilling were identified and appropriate machining conditions were considered.

• Macromolecular Research
• /
• v.14 no.4
• /
• pp.438-442
• /
• 2006

Novel sulfonated poly(aryl ether ketones) containing benzoxazole were directly synthesized by aromatic nucleophilic polycondensation using various ratios of 2,2'-bi[2-( 4-flurophenyl)benzoxazol-6-yl]hexafluoropropane to sodium 5,5'-carbonylbis(2-fluorobenzenesulfonate). The copolymers were soluble in polar aprotic solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, and N,N-dimethylformamide at a relatively high solid composition (>15 wt%) and formed tough, flexible and transparent membranes. The membranes exhibited a degradation temperature of above $290^{\circ}C$. The exact dissolution times of these membranes at $80^{\circ}C$ in Fenton's reagent (3 wt% $H_2O_2$ containing 2 ppm $FeSO_4$) were undetectable, confirming their excellent chemical stability in fuel cell application. The membranes showed a moderate increase in water uptake with respect to increasing temperature. The proton conductivities of the membranes were dependent on the composition and ranged from $1.10{\times}10^{-2}$ to $5.50{\times}10^{-2}Scm^{-1}$ at $80^{\circ}C$ and 95% relative humidity (RH). At $120^{\circ}C$ without externally humidified conditions, the conductivities increased above $10^{-2}Scm^{-1}$ with respect to increasing benzoxazole content, which suggested that the benzoxazole moieties contributed to the proton conduction.

• Design & Manufacturing
• /
• v.2 no.1
• /
• pp.45-50
• /
• 2008

Micro channel is to fabricate desired pattern on the polymer substrate by pressing the patterned mold against the substrate which is heated above the glass transition temperature, and it is a high throughput fabrication method for bio chip, optical microstructure, etc. due to the simultaneous large area patterning. However, the bad pattern fidelity in large area patterning is one of the obstacles to applying the hot embossing technology for mass production. In the present study, stamper of cross channel with width $100{\mu}m$ and height $50{\mu}m$ was manufactured using UV-LiGA process. Micro channel was manufactured using stamper manufactured in this study. Also replicability appliance was evaluated for micro channel and factors affected replicability were investigated using Taguchi method.