• 전자공학회논문지
• /
• 제50권7호
• /
• pp.131-139
• /
• 2013

기존 전기적 상호 연결을 사용한 네트워크-온-칩(Network-on-Chip, NoC)의 전력 및 성능 한계를 보완하고자 광학적 상호연결을 이용하는 하이브리드 광학 네트워크-온-칩(HONoC)이 등장하였다. 하지만 HONoC에서는 광학적 소자 특성으로 인해 서킷 스위칭을 사용함으로써 경로 충돌이 빈번하게 발생하며 이로 인해 지연 시간 불균형의 문제가 심화되어 전체적인 시스템 성능에 악영향을 미치게 된다. 본 논문에서는 경로 충돌을 최소화 시켜 지연 시간을 최적화 할 수 있는 새로운 태스크 매핑 알고리즘을 제안하였다. HONoC 환경에서 태스크를 각 Processing Element (PE)에 할당하고 경로 충돌을 최소화하며, 부득이한 경로 충돌의 경우 워스트 케이스 (worst case) 지연 시간을 최소화 할 수 있도록 하였다. 모의실험 결과를 통해 무작위 매핑 방식, 대역폭 제한 매핑 방식과 비교하여, 제안된 알고리즘이 $4{\times}4$ 메시 토폴로지에서는 평균 43%, $8{\times}8$ 메시 토폴로지에서는 평균 61%의 지연 시간 단축 효과가 있음을 확인할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.157-157
• /
• 2008

As the minimum feature size of semiconductor devices scales down to nano-scale regime, ultra shallow junction is highly necessary to suppress short channel effect. At the same time, Ni-silicide has attracted a lot of attention because silicide can improve device performance by reducing the parasitic resistance of source/drain region. Recently, further improvement of device performance by reducing silicide to source/drain region or tuning the work function of silicide closer to the band edge has been studied extensively. Rare earth elements, such as Er and Yb, and Pd or Pt elements are interesting for n-type and p-type devices, respectively, because work function of those materials is closer to the conduction and valance band, respectively. In this paper, we increased the work function between Ni-silicide and source/drain by using Pd stacked structure (Pd/Ni/TiN) for high performance PMOSFET. We demonstrated that it is possible to control the barrier height of Ni-silicide by adjusting the thickness of Pd layer. Therefore, the Ni-silicide using the Pd stacked structure could be applied for high performance PMOSFET.

• 한방재활의학과학회지
• /
• 제27권3호
• /
• pp.81-93
• /
• 2017

Objectives The purpose of this study is to evaluate the effectiveness of Chuna therapy for primary dysmenorrhea. Methods Researchers searched on 7 electronic databases (Pubmed, National Digital Science Library, China National Knowledge Infrastructure, Wangfang med online, Korean Studies Information Service System, Research Information Sharing Service and Oriental medicine Advanced Searching Integrated System). The search included Korean, English, Chinese reports and there was no limit on the search period. All of randomized controlled clinical trials (RCTs) that used Chuna manual therapy for primary dysmenorrhea were selected. Results 27 RCTs met required condition. Meta-analysis showed positive results for Chuna manual therapy for primary dysmenorrhea in terms of therapeutic effects and reduction of symptom scores compared to west medicine, herbal medicine, acupucture and other treatments. Conclusions Above results showed that performing chuna is effective in treating dysmenorrhea. However, in some studies, there was no statistic significance between the experimental group and the control group. Also, according to Cochrane Risk of Bias (RoB) evaluation method, quality of the studies were not high enough. Since most of the materials were in Chinese, more high-quality clinical trials about Chuna therapy for primary dysmenorrhea are needed in Korea.

• 대한기계학회논문집B
• /
• 제22권4호
• /
• pp.489-498
• /
• 1998

Among the heat/mass exchange units composing an absorption system, the absorber, where the refrigerant vapor is absorbed into the liquid solution is the one least understood. In the present study, the effects of non-absorbable gas on the absorption process of aqueous lithium bromide solution falling film inside a vertical tube were experimentally investigated. In the range of film Reynolds number of 30 ~ 195, heat and mass transfer characteristics were investigated as a function of non-absorbable gas volumetric concentration, 0.2 ~ 20%. An increase of non-absorbable gas volumetric concentration degraded the mass transfer rate dramatically in the absorption process. The reduction of mass transfer rate was significant for the addition of small amount of non-absorbable gas to the pure vapor. At film Reynolds number of 130, an increase of non-absorbable gas concentration from 0.2 to 6.0% resulted in the decrease of mass transfer rate by 36% and 20% of non-absorbable gas by 59%. However the decrease of film Nusselt number with the increase of volumetric concentration of non absorbable gas was relatively smaller than the decrease of Sherwood number. Critical film Reynolds number was identified to exist for the maximum heat and mass transfer regardless of the volumetric concentration of non-absorbable gases.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권6호
• /
• pp.2480-2496
• /
• 2020

Considering that high-dose X-ray radiation during CT scans may bring potential risks to patients, in the medical imaging industry there has been increasing emphasis on low-dose CT. Due to complex statistical characteristics of noise found in low-dose CT images, many traditional methods are difficult to preserve structural details effectively while suppressing noise and artifacts. Inspired by the deep learning techniques, we propose a densely connected residual network (DCRN) for low-dose CT image noise cancelation, which combines the ideas of dense connection with residual learning. On one hand, dense connection maximizes information flow between layers in the network, which is beneficial to maintain structural details when denoising images. On the other hand, residual learning paired with batch normalization would allow for decreased training speed and better noise reduction performance in images. The experiments are performed on the 100 CT images selected from a public medical dataset-TCIA(The Cancer Imaging Archive). Compared with the other three competitive denoising algorithms, both subjective visual effect and objective evaluation indexes which include PSNR, RMSE, MAE and SSIM show that the proposed network can improve LDCT images quality more effectively while maintaining a low computational cost. In the objective evaluation indexes, the highest PSNR 33.67, RMSE 5.659, MAE 1.965 and SSIM 0.9434 are achieved by the proposed method. Especially for RMSE, compare with the best performing algorithm in the comparison algorithms, the proposed network increases it by 7 percentage points.

• Structural Engineering and Mechanics
• /
• 제34권6호
• /
• pp.779-799
• /
• 2010

In order to consider high-order effects on the actual limit state function, a new response surface method is proposed for structural reliability analysis by the use of high-order approximation concept in this study. Hermite polynomials are used to determine the highest orders of input random variables, and the sampling points for the determination of highest orders are located on Gaussian points of Gauss-Hermite integration. The cross terms between two random variables, only in case that their corresponding percent contributions to the total variation of limit state function are significant, will be added to the response surface function to improve the approximation accuracy. As a result, significant reduction in computational cost is achieved with this strategy. Due to the addition of cross terms, the additional sampling points, laid on two-dimensional Gaussian points off axis on the plane of two significant variables, are required to determine the coefficients of the approximated limit state function. All available sampling points are employed to construct the final response surface function. Then, Monte Carlo Simulation is carried out on the final approximation response surface function to estimate the failure probability. Due to the use of high order polynomial, the proposed method is more accurate than the traditional second-order or linear response surface method. It also provides much more efficient solutions than the available high-order response surface method with less loss in accuracy. The efficiency and the accuracy of the proposed method compared with those of various response surface methods available are illustrated by five numerical examples.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권4호
• /
• pp.1851-1857
• /
• 2014

Objective: The main purpose of this work was to investigate the effect of berberine hydrochloride (BH) on the proliferation, apoptosis, migration, and invasion of CNE-1 nasopharyngeal carcinoma cells. Our results shed light on the functional components of traditional Chinese herbs for potential use in modern medicine. Methods: The CNE-1 cell line was treated with different concentrations of BH and effects on cell viability and proliferation were evaluated using the Cell Counting Kit-8 (CCK-8) assay. Anti-migratory and anti-invasive actions of BH were investigated using wound healing assays and the Millicell Hanging cell culture insert system, respectively. Expression of the epithelial-mesenchymal transition (EMT)-related gene twist (Twist) was analyzed by real-time PCR and Western blotting. Apoptosis was estimated with an annexin-V fluorescein (FITC) apoptosis detection kit, as well as with reference to levels of activated caspase-3 of CNE-1 cells before and after treatment with BH utilizing fluorescence spectroscopy. Results: BH was capable of reducing proliferation and viability of CNE-1 cells in a dose- and time-dependent manner, also demonstrating anti-migratory and anti-invasive capacities which correlated with reduction in expression of Twist. Finally, BH was able to induce significant amounts of apoptosis in CNE-1 cells, as demonstrated by an increase in the activity of caspase-3 and in annexin-V staining following treatment. Conclusion: BH extracted from rhizoma coptidis demonstrated an ability to block proliferation, induce apoptosis, and impair the migration and invasion of the CNE-1 cell line Considering these properties, our results suggest that BH could be an important compound for consideration in the treatment of nasopharyngeal carcinoma.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권18호
• /
• pp.7995-8001
• /
• 2014

Interferon-gamma (IFN-${\gamma}$) has been used to treat various malignant tumors. However, the molecular mechanisms underlying the direct anti-proliferative activity of IFN-${\gamma}$ are poorly understood. In the present study, we examined the in vitro antitumor activity of IFN-${\gamma}$ on two human non-small-cell lung carcinoma (NSCLC) cell lines, H322M and H226. Our findings indicated that IFN-${\gamma}$ treatment caused a time-dependent reduction in cell viability and induced apoptosis through a FADD-mediated caspase-8/tBid/mitochondria-dependent pathway in both cell lines. Notably, we also postulated that IFN-${\gamma}$ increased indoleamine 2,3-dioxygenase (IDO) expression and enzymatic activity in H322M and H226 cells. In addition, inhibition of IDO activity by the IDO inhibitor 1-MT or tryptophan significantly reduced IFN-${\gamma}$-induced apoptosis and death receptor 5 (DR5) expression, which suggests that IDO enzymatic activity plays an important role in the anti-NSCLC cancer effect of IFN-${\gamma}$. These results provide new mechanistic insights into interferon-${\gamma}$ antitumor activity and further support IFN-${\gamma}$ as a potential therapeutic adjuvant for the treatment of NCSLC.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.417-428
• /
• 2020

Investigations of the commercial aircraft impact effect on nuclear island infrastructures have been drawing extensive attention, and this paper aims to perform the safety assessment of Generation III nuclear power plant (NPP) buildings subjected to typical commercial aircrafts crash. At present Part III, the local damage of the rigid components of aircraft, e.g., engine and landing gear, impacting the steel concrete (SC) structures of NPP containment is mainly discussed. Two typical SC target panels with the thicknesses of 40 mm and 100 mm, as well as the steel cylindrical projectile with a mass of 2.15 kg and a diameter of 80 mm are fabricated. By using a large-caliber air gas gun, both the projectile penetration and perforation test are conducted, in which the striking velocities were ranged from 96 m/s to 157 m/s. The bulging velocity and the maximal deflection of rear steel plate, as well as penetration depth of projectile are derived, and the local deformation and failure modes of SC panels are assessed experimentally. Then, the commercial finite element program LS-DYNA is utilized to perform the numerical simulations, by comparisons with the experimental and simulated projectile impact process and SC panel damage, the numerical algorithm, constitutive models and the corresponding parameters are verified. The present work can provide helpful references for the evaluation of the local impact resistance of NPP buildings against the aircraft engine.

• 한국물환경학회지
• /
• 제24권6호
• /
• pp.701-708
• /
• 2008

As a countermeasure for reduction of corrosion in the delivery and distribution pipes used for tap water, materials for the pipelines in-houses and the effect of water quality on corrosivity of water pipelines were investigated in the distribution system of Han river. As the corrosion index at 6 water purification facilities of Han river, average Langelier Saturation Index (LI) of raw and finished water were -1.0 and -1.4 respectively and average Larson Index (LR) were 9.5 and 9.9, respectively. And also corrosion potential showed corrosivity in finished water (-431~-462 mV) as well as raw water (-426~-447 mV). This results indicate that tap water quality of han river have corrosivity. To understand the corrosivity effect in pipe material used for premise distribution system, water quality of stagnant tap water and tap water were analyzed and the differences between them were calculated. The difference concentration of iron, copper and zinc were $12.9{\mu}g/L$, $31.0{\mu}g/L$ and $45.0{\mu}g/L$ respectively in galvanized steel pipe for use more than 15 years and showed highest concentration. As a result, the control to corrosivity in the water pipelines, corrosivity control treatment in the water purification system can be applied. In advance it is necessary to monitor corrosivity of water quality using corrosive index because corrosivity may differ from the seasonal and regional characteristics and water chemicals dosage. For the future the guideline for corrosion index have to be established.