• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.581-589
• /
• 2003

Film absorption involves simultaneous heat and mass transfer in the gas-liquid system. While the non-absorbable gas does not participate directly In the absorption process. its pretence does affect the overall heat and mass transfer. An experimental study was performed to investigate the heat and mass transfer characteristics of LiBr-H$_2$O solution flow ing over 6-row horizontal tubes with the water vapor absorption in the pretence of non-absorbable gases. The volumetric concentration of non-absorbable gas, air, was varied from 0.17 to 10.0%. The combined effects of the solution flow rate and its concentration on the heat and mass transfer coefficients were also examined. The presence of 2％ volumetric concentration of air resulted in a 25% reduction in the Nusselt number and 41% reduction in the Sherwood number Optimum film Reynolds number was found to exist at which the heat and mass transfer reach their maximum value independent of air contents. Reduced Nusselt and Sherwood numbers. defined as the ratio of Nusselt and Sherwood numbers at given non-absorbable gas content to that with pure water vapor, were correlated to account for the reduction in the heat and mass transfer due to non-absorbable gases in a falling film absorption process.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권6호
• /
• pp.2908-2924
• /
• 2019

Multiple input multiple output orthogonal frequency division multiplexing (MIMO-OFDM) is widely applied in wireless communication by virtue of its excellent properties in data transmission rate and transmission accuracy. However, as a major drawback of MIMO-OFDM systems, the high peak-to-average power ratio (PAPR) complicates the design of the power amplifier at the receiver end. Some available PAPR reduction methods such as selective mapping (SLM) suffer from high computational complexity. In this paper, a low-complexity SLM method based on active constellation extension (ACE) and joint space-time selective mapping (AST-SLM) for reducing PAPR in Alamouti STBC MIMO-OFDM systems is proposed. In SLM scheme, two IFFT operations are required for obtaining each transmission sequence pair, and the selected phase vector is transmitted as side information(SI). However, in the proposed AST-SLM method, only a few IFFT operations are required for generating all the transmission sequence pairs. The complexity of AST-SLM is at least 86% less than SLM. In addition, the SI needed in AST-SLM is at least 92.1% less than SLM by using the presented blind detection scheme to estimate SI. We show, analytically and with simulations, that AST-SLM can achieve significant performance of PAPR reduction and close performance of bit error rate (BER) compared to SLM scheme.

• 한국재료학회지
• /
• 제15권3호
• /
• pp.155-160
• /
• 2005

The electrolytic reduction of spent oxide fuel involves the liberation of oxygen in a molten LiCl electrolyte, which results in a chemically aggressive environment that is very corrosive fir typical structural materials. So, it is essential to choose the optimum material f3r the process equipment handling molten salt. In this study, the corrosion behavior of Al-Y coated Haynes 263 in a molten salt of $LiCl-Li_2O$ under oxidation atmosphere was investigated at $650^{\circ}C$ for $72\~168$ hours. The corrosion rate of Al-Y coated Haynes 263 was low while that of bare Haynes 263 was high in a molten salt of $LiCl-Li_2O$. Al-Y coated Haynes 263 improved the corrosion resistance better than bare Haynes 263 alloy. An Al oxide layer acts as a protective film which Prohibits Penetration of oxygen. Corrosion Products were formed $Li(Ni,Co)O_2$ and $LiTiO_2$ on bare Haynes 263, but $LiAlO_2,\;Li_5Fe_5O_8\;and\;LiTiO_2$ on Al-Y coated Haynes 263.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.447-452
• /
• 2003

산화물 핵연료의 리튬환원공정에서 생성되는 $Li_2O$와 희토류원소 산화물($RE_2O_3$)의 화학적 반응을 밝혔다. 스칸듐, 이트륨, 프라세오디뮴, 네오디뮴, 사마륨, 유러퓸, 가돌리늄, 이테르븀 및 루테튬의 산화물은 각각 어떤 $Li_2O$의 임계농도 이상에서 $Li_2O$와 반응하여 복합산화물($LiREO_2$)을 형성하고, 이들 산화물이 복합산화물을 형성하는 각각의 $Li_2O$ 임계농도는 0.1 wt%, 1.9 wt%, 5.3 wt%, 5.0 wt%, 3.0 wt%, 3.9 wt%, 2.9 wt%, 2.6 wt% 및 0.3 wt%로 나타났다. $CeO_2$ 및 란타늄 산화물은 $Li_2O$와 반응하지 않는 것으로 나타났다. 실험에서 얻은 이들 희토류원소 복합산화물의 LiCl 용융염에 대한 용해도는 매우 작았다.

• 한국재료학회지
• /
• 제23권2호
• /
• pp.123-127
• /
• 2013

The electrolytic reduction of a spent oxide fuel involves liberation of the oxygen in a molten LiCl electrolyte, which is a chemically aggressive environment that is too crosive for typical structural materials. Therefore, it is essential to choose the optimum material for the process equipment for handling a molten salt. In this study, the corrosion behavior of pyro-carbon made by CVD was investigated in a molten LiCl-$Li_2O$ salt under an oxidation atmosphere at $650^{\circ}C$ and $750^{\circ}C$ for 72 hours. Pyro-carbon showed no chemical reactions with the molten salt because of its low wettability between pyro-carbon and the molten salt. As a result of XRD analysis, pyro-carbon exposed to the molten salt showed pure graphite after corrosion tests. As a result of TGA, whereas the coated layer by CVD showed high anti-oxidation, the non-coated layer showed relatively low anti-oxidation. The stable phases in the reactions were $C_{(S)}$, $Li_2CO_{3(S)}$, $LiCl_{(l)}$, $Li_2O$ at $650^{\circ}C$ and $C_{(S)}$, $LiCl_{(l)}$, $Li_2O_{(S)}$ at $750^{\circ}C$. $Li_2CO_{(S)}$ was decomposed at $750^{\circ}C$ into $Li_2O_{(S)}$ and $CO_{2(g)}$.

• 대한한방소아과학회지
• /
• 제18권1호
• /
• pp.273-288
• /
• 2004

Objective: The purpose of this study was to investigate the oriental cause and treatment of the polyhidrosis of hands and feet. Methods: It was studied 47 kinds of Oriental Medical literature for polyhidrosis of hands and feet Results: Polyhidrosis of hands and feet due to lowered superficial resistance brought on by deficiency of qi. Main pathogenesis(病因病機) is the heat in the middle energizer(中焦熱) such as heat in the stomach(胃熱) and the spleen and stomach heat stagnation(脾胃積熱), deficient in Yin and Yang, qi and blood(陰陽氣血), and retention of undigested food(食積) due to improper diet(飮食不能). Treating method(治法) is eliminating dampness and regulating the stomach(淸熱燥瀑和中), invigorating, replenishing spleen qi(補益脾氣), and nourishing the stomach Yin(滋養胃陰). Treating prescription(治方) is presented as Palmultang with Additional Ingredients Rhi.zoma Pinelliae, Pona for principle drug Rhi.zorm Typfwnii Radix Aconiti for adjuvant and messenger drug(八物湯加半夏 茯笭君 白附子 川烏爲在使), Daeshihotang(大柴胡湯), Cheongbisan(淸脾散), Moryeosan(牡蠣散) etc. The external treatments(外用法) are described as ways of washing hand and foot after steaming with boiled Decoction(牡蠣散) of AJurnen(白礬); Radix Puerariae(乾葛), Radix Astragali(黃?); Radix Puerariae(乾葛), Herba Schiwnepetae(荊芥); Radix Saposhnikoviae (防風), 白礬(AIumen). The acupuncture recipes (鍼治療法) are the toninfication(補) of Buryu(KI 7)(復溜) ; Eumgeuk(HT 6)(陰?), tonification(補) methods of Buryu(KI 7)(復溜) ; Gihae(CC 6)(氣海) and reduction(潟) of Hapgok(LI 4)(合谷), the reduction(潟) of Hapgok(LI 4)(合谷), tonification of Buryu(Kl 7)(復溜), reduction(潟) of Jigu(TE 6)(支溝) ; Taechung(LR 3)(太衝) ; Yangneungcheon (GB 34)(陽陸泉). and selection of points of Hapgok(Li 4) (合谷) and Nogung(PC 8)(勞宮). The Tui-na therapies (推拿療法) are removing heat from the stomach meridian(淸胃經O) and so on.

• 전기화학회지
• /
• 제2권3호
• /
• pp.156-162
• /
• 1999

본 연구에서는 리튬전지 내 양극 재료로서 리튬-철계 산화물의 응용가능성을 모색하기 위하여 여러 제조방법에 따라 변화되는 전기화학적 특성을 고찰하고자 하였다. 철산화물에 대한 기본적인 양극 전기화학적 특성을 관찰하기 위해 철판, 철분말을 산화시켜 제작한 전극과 FeOOH 분말로 제작한 전극을 전류전위 순환실험을 실행하였다. 그 결과 철판과 FeOOH분말 전극의 경우 거의 리튬 층간의 산화-환원 반응이 일어나지 않음을 알 수 있었으며 철 분말의 산화물 전극에서는 리튬이온의 환원반응 피크는 보이나 산화반응은 거의 관찰되지 않았다. 또한 출발 물질 $FeCl_3-6H_2O,\;NaOH.\;LiOH$를 혼합하여 저온으로 가열하여 층상의 $LiFeO_2$를 합성하였으며, 출발 물질의 조성비를 바꾸어 그 영향을 조사하였다. 그 결과 NaOH의 첨가량이 증가할수록 전극의 용량과 효율은 감소하나 용량의 감소율은 작아짐을 알 수 있었다. $NaOH/FeCl_3/LiOH$의 몰 비를 2/1/7로 조성하여 합성하였을 때 가장 큰 용량을 보였으나 효율은 30회 순환 후 급격히 감소하였다.

• 공업화학
• /
• 제16권3호
• /
• pp.312-316
• /
• 2005

본 연구에서는 원시 활성탄에 질산을 이용한 산 처리 또는 LiOH를 첨착한 후, 이에 대한 이산화탄소의 흡착 특성을 수분의 공존 유, 무 상태에서 고정층 파과 실험을 통해 평가하였다. 질산 처리 및 LiOH 첨착에 따른 활성탄의 표면 성상 및 물리, 화학적 특성은 SEM, EDS, 질소 흡착, FTIR, XRD를 이용하여 고찰하였다. 질산 처리로 인해 원시 활성탄의 비표면적은 감소하였지만 활성탄 표면에서 산소 함량은 증가하였으며, 질산의 산화 반응으로 활성탄 표면에 탄소 및 산소 외에 질소를 포함한 새로운 관능기가 생성되었다. LiOH 첨착으로 인한 비표면적의 감소 폭은 질산 처리한 활성탄이 원시 활성탄에 비해 작게 나타났다. LiOH를 2 wt% 이상으로 첨착하면 상당 부분의 LiOH가 활성탄 세공 내부에 들어가지 못하고 외부 표면에 존재하였다. 고정층 파과 실험을 통해 질산 처리 및 LiOH 첨착량 증가에 따라 활성탄의 이산화탄소 흡착 성능은 향상되었다. 또한 공급가스 내에 수분이 공존함에 따라 이산화탄소 흡착량이 증가하였다. LiOH가 첨착된 활성탄에서 이산화탄소 흡착 후 LiOH는 화학반응에 의해 $Li_2CO_3$로 전환함을 확인하였다.

• 공업화학
• /
• 제21권5호
• /
• pp.590-592
• /
• 2010

본 연구에서는 리튬 2차 전지의 양극물질 중 하나인 Li-Mn spinel ($LiMn_2O_4$)을 합성하기 위해 전구체로 K-Birnessite ($K_xMnO_2{\cdot}{yH_2O}$)를 이용하였다. K-Birnessite는 과망간산칼륨[$KMnO_4$]과 우레아[$CO(NH_2)_2$]를 사용하여 수열합성법으로 합성하였고, K-Birnessite와 LiOH를 수열 반응시켜 Li-Mn spinel 나노입자를 제조하였다. 리튬함량에 따른 Li-Mn spinel 의 구조 및 형상 변화와 전기화학적 특성에 대한 경향성을 알아보기 위해 LiOH와 K-Birnessite의 몰 비를 조절하여 Li-Mn spinel를 합성하였다. 합성된 분말은 X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), thermogravimetry (TG)를 이용하여 물질의 구조 및 형상을 분석하였고, 정전류법으로 양극재의 용량과 율 특성을 비교 분석하였다. 그 결과 LiOH/K-Birnessite의 몰 비가 0.8일 때 가장 큰 용량($117\;mAhg^{-1}$)을 나타냈고, 몰 비가 증가할수록 Li-Mn spinel 중 리튬함량이 증가하여 용량은 감소하였으나, 입자크기는 작아져서 율 특성은 점점 향상되는 경향을 보였다.

• Journal of Electrochemical Science and Technology
• /
• 제5권1호
• /
• pp.1-18
• /
• 2014

Li-air cell is an exotic type of energy storage and conversion device considered to be half battery and half fuel cell. Its successful commercialization highly depends on the timely development of key components. Among these key components, the catalyst (i.e., the core portion of the air electrode) is of critical importance and of the upmost priority. Indeed, it is expected that these catalysts will have a direct and dramatic impact on the Li-air cell's performance by reducing overpotentials, as well as by enhancing the overall capacity and cycle life of Li-air cells. Unfortunately, the technological advancement related to catalysts is sluggish at present. Based on the insights gained from this review, this sluggishness is due to challenges in both the commercialization of the catalyst, and the fundamental studies pertaining to its development. Challenges in the commercialization of the catalyst can be summarized as 1) the identification of superior materials for Li-air cell catalysts, 2) the development of fundamental, material-based assessments for potential catalyst materials, 3) the achievement of a reduction in both cost and time concerning the design of the Li-air cell catalysts. As for the challenges concerning the fundamental studies of Li-air cell catalysts, they are 1) the development of experimental techniques for determining both the nano and micro structure of catalysts, 2) the attainment of both repeatable and verifiable experimental characteristics of catalyst degradation, 3) the development of the predictive capability pertaining to the performance of the catalyst using fundamental material properties. Therefore, under the current circumstances, it is going to be an extremely daunting task to develop appropriate catalysts for the commercialization of Li-air batteries; at least within the foreseeable future. Regardless, nano materials are expected to play a crucial role in this field.