• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.340-341
• /
• 2005

Lithium titanium oxide as anode material for energy storage prepared by novel synthesis method. $Li_4Ti_5O_{12}$ based spinel-framework structures are of great interest material for lithium-ion batteries. We describe here $Li_4Ti_5O_{12}$ a zero-strain insertion material was prepared by novel sol-gel method and by high energy ball milling (HEBM) of precursor to from nanocrystalline phases. According to the X-ray diffraction and scanning electron microscopy analysis, uniformly distributed $Li_4Ti_5O_{12}$ particles with grain sizes of 100nm were synthesized. Lithium cells, consisting of $Li_4Ti_5O_{12}$ anode and lithium cathode showed the 173 mAh/g in the range of 1.0 $\sim$ 3.0 V. Furthermore, the crystalline structure of $Li_4Ti_5O_{12}$ didn't transfer during the lithium intercalation and deintercalation process.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.83-89
• /
• 2020

For the past few decades, as part of efforts to protect the environment where fossil fuels, which have been a key energy resource for mankind, are becoming increasingly depleted and pollution due to industrial development, ecofriendly secondary batteries, hydrogen generating energy devices, energy storage systems, and many other new energy technologies are being developed. Among them, the lithium-ion battery (LIB) is considered to be a next-generation energy device suitable for application as a large-capacity battery and capable of industrial application due to its high energy density and long lifespan. However, considering the growing battery market such as eco-friendly electric vehicles and drones, it is expected that a large amount of battery waste will spill out from some point due to the end of life. In order to prepare for this situation, development of a process for recovering lithium and various valuable metals from waste batteries is required, and at the same time, a plan to recycle them is socially required. In this study, we introduce a nanoscale pattern transfer printing (NTP) process of Li2CO3, a representative anode material for lithium ion batteries, one of the strategic materials for recycling waste batteries. First, Li2CO3 powder was formed by pressing in a vacuum, and a 3-inch sputter target for very pure Li2CO3 thin film deposition was successfully produced through high-temperature sintering. The target was mounted on a sputtering device, and a well-ordered Li2CO3 line pattern with a width of 250 nm was successfully obtained on the Si substrate using the NTP process. In addition, based on the nTP method, the periodic Li2CO3 line patterns were formed on the surfaces of metal, glass, flexible polymer substrates, and even curved goggles. These results are expected to be applied to the thin films of various functional materials used in battery devices in the future, and is also expected to be particularly helpful in improving the performance of lithium-ion battery devices on various substrates.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.11
• /
• pp.1157-1163
• /
• 2009

This paper introduces the lithium ion battery management system for STSAT-3 satellite. The specifications of lithium ion battery unit are proposed to supply power to the satellite and the overall electrical design for lithium ion battery BMS is presented. Furthermore, the test results of battery management system are shown to verify the design.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.437-443
• /
• 2019

All-solid-state thin-film lithium-ion batteries are important in the development of next-generation energy storage devices with high energy density. However, thin-film batteries have many challenges in their manufacturing procedure. This is because there are many factors, such as substrate selection, to consider when producing the thin film multilayer structure. In this study, we compare the fabrication and performance of all-solid-state thin-film lithium-ion batteries with a $LiNi_{0.5}Mn_{1.5}O_4$ cathode/LiPON solid electrolyte/$Li_4Ti_5O_{12}$ anode structure using stainless steel and Si substrates with different surface roughness. We demonstrate that the smoother the surface of the substrate, the thinner the thickness of the all-solid-state thin-film lithium-ion battery that can be made, and as a result, the corresponding electrochemical characteristics can be improved.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.89-101
• /
• 2006

This paper addresses Electrical Power Subsystem(EPS) design and verification of HAUSAT-2 small satellite through energy balance analysis(EBA) depending on individual operation modes. GaAs solar cells are used for satellite power generation and digital peak power tracking is implemented for EPS architecture. One battery pack is consisted of 4 Li-Ion cells. Battery charge is accomplished by peak power tracker and battery charge regulator. Power conditioning assembly uses three DC-DC converters, and power distribution assembly which consists of commercial IC and MOSFET switch distributes power to subsystems and payloads. The altitude of 650km and sun-synchronous LEO with various local time ascending node(LTAN) are considered in EBA.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.141-145
• /
• 2017

This paper presents a method to improve Li-ion battery charging speed for portable electronic devices maintaining stable operating temperature. The proposed method uses multiple chargers which consist of a master module and slave modules designed with single wire communication signal for parallel current path in order to simplify the additional hardware needs. A single wire communication signal control between a master module and slave modules makes the number of pins of parts lowered and the required area small, furthermore leading to lower cost. Therefore the proposed charging method can be practically used for implementing battery charging modules requiring high speed Li-ion battery charging.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.689-692
• /
• 2005

In order to improve the electrochemical performances of Li-ion batteries when spinel $LiMn_2O_4$ is employed as a cathode active material, binary conductive agents were prepared using two different particle-sized carbons like Super P Black and $Vulcan^{(R)}$ XC-72R. The electrochemical performances of the $LiMn_2O_4$ cell system using binary conductive agents were evaluated in terms of specific charge and discharge capacities and cycle life. The cell with binary conductive agent in the 3:7 weight ratios of Super P Black and $Vulcan^{(R)}$ XC-72R showed better electrochemical performances due to the proper combination of ionic diffusion rate and electric contact.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.124-132
• /
• 2018

This paper proposes an LLC resonant converter based battery charger which utilizes an adaptive turn ratio scheme to achieve a wide output voltage range and high efficiency. The high frequency transformer of the LLC converter of the proposed strategy has an adaptively changed turn ratio through the auxiliary control circuit. As a result, an optimized converter design with high magnetizing inductance is possible, while minimizing conduction and turn-off losses and providing a regulated voltage gain to properly charge the lithium ion battery. For a step-by-step explanation, operational principle and optimal design considerations of the proposed converter are illustrated in detail. Finally, the effectiveness of the proposed strategy is verified through various experimental results and efficiency analysis based on prototype 300W Li-ion battery charger and battery pack.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.1
• /
• pp.31-35
• /
• 2007

In this review article, we are going to explain the recent development of lithium secondary batteries for a cellular phone. There are three kinds of rechargeable batteries for cellular phones such as nickel-cadmium, nickel-metal hydride, and lithium ion or lithium ion polymer. The lithium secondary battery is one of the most excellent battery in the point of view of energy density. It means very small and light one among same capacity batteries is the lithium secondary battery. The market volume of lithium secondary batteries increases steeply about 15% annually. The trend of R&D is focused on novel cathode materials including $LiFePO_4$, novel anode materials such as lithium titanate, silicon, and tin, elecrolytes, and safety insurance.

• Journal of the Korean Chemical Society
• /
• v.66 no.6
• /
• pp.451-458
• /
• 2022

Through the crystal alignment research based on the magnetic properties of LiNi_xMn_yCo_1-(x+y)O₂ such as magnetic susceptibility and related anisotropy, a crystal aligned LiNi_0.6Mn_0.2Co_0.2O₂ electrode is obtained, in which the (00l) plane is frequently oriented perpendicular to the surface of a current collector. The crystal aligned LiNi_0.6Mn_0.2Co_0.2O₂ electrode steadily exhibits low electrode polarization properties during the charge/discharge process in a lithium-ion battery, thus affording an improved capacity compared to a pristine LiNi_0.6Mn_0.2Co_0.2O₂ electrode. The aligned LiNi_0.6Mn_0.2Co_0.2O₂ electrode may have an appropriate structural nature for fast lithium-ion transport due to the oriented (00l) plane, and thus it contributes to enhancing the battery performance. This enhancement is analyzed in terms of various electrochemical theories and experiment results; thus, it is verified to occur because of the considerably fast lithium-ion transport in the aligned LiNi_0.6Mn_0.2Co_0.2O₂ electrode.