Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

The Effect of Substrate Roughness on the Fabrication and Performance of All-Solid-State Thin-Film Lithium-Ion Battery

기판의 표면 거칠기 특성이 전고상 리튬박막 이차전지의 제작 및 전기화학 특성에 미치는 영향

  • Kim, Jong Heon (Department of Materials Science and Engineering, Chungnam National University) ;
  • Xiao, Cheng-Fan (Department of Materials Science and Engineering, Chungnam National University) ;
  • Go, Kwangmo (Department of Chemical Engineering and Applied Chemistry, Chungnam National University) ;
  • Lee, Kyung Jin (Department of Chemical Engineering and Applied Chemistry, Chungnam National University) ;
  • Kim, Hyun-Suk (Department of Materials Science and Engineering, Chungnam National University)
  • 김종헌 (충남대학교 신소재공학과) ;
  • 소승범 (충남대학교 신소재공학과) ;
  • 고광모 (충남대학교 응용화학공학과) ;
  • 이경진 (충남대학교 응용화학공학과) ;
  • 김현석 (충남대학교 신소재공학과)
  • Received : 2019.07.21
  • Accepted : 2019.08.15
  • Published : 2019.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

All-solid-state thin-film lithium-ion batteries are important in the development of next-generation energy storage devices with high energy density. However, thin-film batteries have many challenges in their manufacturing procedure. This is because there are many factors, such as substrate selection, to consider when producing the thin film multilayer structure. In this study, we compare the fabrication and performance of all-solid-state thin-film lithium-ion batteries with a $LiNi_{0.5}Mn_{1.5}O_4$ cathode/LiPON solid electrolyte/$Li_4Ti_5O_{12}$ anode structure using stainless steel and Si substrates with different surface roughness. We demonstrate that the smoother the surface of the substrate, the thinner the thickness of the all-solid-state thin-film lithium-ion battery that can be made, and as a result, the corresponding electrochemical characteristics can be improved.

Keywords

References

  1. J. M. Tarascon and M. Armand, Nature, 414, 359 (2001). [DOI: https://doi.org/10.1038/35104644]
  2. Z. Yang, J. Zhang, M.C.W. Kintner-Meyer, X. Lu, D. Choi, J. P. Lemmon, and J. Liu, Chem. Rev., 111, 3577 (2011). [DOI: https://doi.org/10.1021/cr100290v]
  3. J. B. Goodenough and Y. Kim, Chem. Mater., 22, 587 (2010). [DOI: https://doi.org/10.1021/cm901452z]
  4. J. B. Bates, N. J. Dudney, B. Neudecker, A. Ueda, and C. D. Evans, Solid State Ionics, 135, 33 (2000). [DOI: https://doi.org/10.1016/S0167-2738(00)00327-1]
  5. N. Ohta, K. Takada, L. Zhang, R. Ma, M. Osada, and T. Sasaki, Adv. Mater., 18, 2226 (2006). [DOI: https://doi.org/10.1002/adma.200502604]
  6. J. H. Woo, J. E. Trevey, A. S. Cavanagh, Y. S. Choi, S. C. Kim, S. M. George, K. H. Oh, and S. H. Lee, J. Electrochem. Soc., 159, A1120 (2012). [DOI: https://doi.org/10.1149/2.085207jes]
  7. K. Yamamoto, Y. Iriyama, T. Asaka, T. Hirayama, H. Fujita, C.A.J. Fisher, K. Nonaka, Y. Sugita, and Z. Ogumi, Angew. Chem. Int. Ed., 49, 4414 (2010). [DOI: https://doi.org/10.1002/anie.200907319]
  8. C. Sun, J. Liu, Y. Gong, D. P. Wilkinson, and J. Zhang, Nano Energy, 33, 363 (2017). [DOI: https://doi.org/10.1016/j.nanoen.2017.01.028]
  9. L. Li, S. Liu, H. Zhou, Q. Lei, and K. Qian, Mater. Lett., 216, 135 (2018). [DOI: https://doi.org/10.1016/j.matlet.2017.12.131]
  10. J. W. Park, S. Rajendran, and H. S. Kwon, J. Power Sources, 159, 1409 (2006). [DOI: https://doi.org/10.1016/j.jpowsour.2005.11.064]
  11. H. Xia, L. Lu, and G. Ceder, J. Alloys Compd., 417, 304 (2006). [DOI: https://doi.org/10.1016/j.jallcom.2005.09.065]
  12. J. H. Kim, J. Park, K. Park, S. H. Cho, Y. C. Park, C. Kim, I. D. Kim, K. Park, and H. S. Kim, J. Electroceram., 42, 104 (2019). [DOI: https://doi.org/10.1007/s10832-018-0168-4]
  13. J. H. Kim, J. Park, J. Y. Cheong, A. Song, K. B. Chung, Y. C. Park, I. D. Kim, Y. J. Kim, K. Park, and H. S. Kim, Ceram. Int., 44, 20093 (2018). [DOI: https://doi.org/10.1016/j.ceramint.2018.07.284]
  14. C. F. Xiao, J. H. Kim, D. Choi, Y. C. Park, J. H. Kim, J. Park, Y. J. Kim, and H. S. Kim, J. Alloys Compd., 801, 550 (2019). [DOI: https://doi.org/10.1016/j.jallcom.2019.06.151]
  15. C. A. Geiger, E. Alekseev, B. Lazic, M. Fisch, T. Armbruster, R. Langner, M. Fechtelkord, N. Kim, T. Pettke, and W. Weppner, Inorg. Chem., 50, 1089 (2011). [DOI: https://doi.org/10.1021/ic101914e]
  16. I. Seo and S. W. Martin, Inorg. Chem., 50, 2143 (2011). [DOI: https://doi.org/10.1021/ic101448m]
  17. Y. Hamon, A. Douard, F. Sabary, C. Marcel, P. Vinatier, B. Pecquenard, and A. Levasseur, Solid State Ionics, 177, 257 (2006). [DOI: https://doi.org/10.1016/j.ssi.2005.10.021]
  18. B. Fleutot, B. Pecquenard, H. Martinez, M. Letellier, and A. Levasseur, Solid State Ionics, 186, 29 (2011). [DOI: https://doi.org/10.1016/j.ssi.2011.01.006]
  19. X. Fan, X. Ji, F. Han, J. Yue, J. Chen, L. Chen, T. Deng, J. Jiang, and C. Wang, Sci. Adv., 4, 9245 (2018). [DOI: https://doi.org/10.1126/sciadv.aau9245]