• 한국항공우주학회지
• /
• 제41권6호
• /
• pp.481-487
• /
• 2013

GPS/INS 항법시스템의 설치에 있어서 대다수의 경우 GPS 수신기 안테나는 차량의 외부에 설치하게 되고 IMU는 내부에 설치하게 된다. Lever Arm 오차는 이와 같이 센서의 장착 위치 차이로 인하여 발생하는 구조적인 오차에 해당한다. Lever Arm 오차는 항법성능에 직접적으로 영향을 주기 때문에 적절한 보상이 반드시 필요하다. 본 논문에서는 GPS와 INS의 속도 측정치를 활용하여 임의의 위치에 장착된 두 센서의 Lever Arm 오차를 효과적으로 추정하고 보상하는 방식을 제안하였다. 실험을 통해 제안한 알고리즘의 타당성을 검증하였으며, 항체의 회전운동 구간에서 Lever Arm 오차 보상이 특히 중요함을 보였다.

• International Journal of Control, Automation, and Systems
• /
• 제4권2호
• /
• pp.247-254
• /
• 2006

For more accurate navigation, lever arm compensation is considered. The compensation method for GPS and an odometer is introduced and new compensation methods are proposed for an odometer to consider the effect of coordinate transformation errors and the scale factor error. The methods are applied to a GPS/INS/odometer integrated system and the simulation and experimental results show its effectiveness.

• Journal of Positioning, Navigation, and Timing
• /
• 제1권1호
• /
• pp.45-49
• /
• 2012

The flight performance evaluation of navigation system is very significant because the reliability of navigation data directly affect the safety of aircraft. Especially, the high-level navigation system such as DGPS/INS, need more precise flight performance evaluation method. The performance analysis is evaluated by comparing between the navigation system in aircraft and reference trajectory which is more precise than navigation system in aircraft. In order to verify DGPS/INS performance of m-level, the GPS receiver, which is capable post-processed Carrier-phase Differential GPS(CDGPS) method of cm-level, have to be used as reference system. The DGPS/INS is estimated the Center of Gravity (CG) point of aircraft to offer precise performance while the reference system is output the position of GPS antenna which is mounted on the outside of aircraft. Therefore, in order to more precise performance evaluation, it needs to compensate the lever arm and coordinates transformation. This paper use quaternion and Direct Cosine Matrix(DCM) methods as coordinate transformation matrix in lever arm compensation of CDGPS reference trajectory. And it compares NED errors of DCM and quaternion transformation in lever arm of reference trajectory via DGPS/INS result.

• 한국항공우주학회지
• /
• 제40권12호
• /
• pp.1086-1092
• /
• 2012

항공 산업의 발전에 따라 정밀하고 신뢰성 높은 항법 정확도를 제공하기 위하여 DGPS/INS 복합항법 장치에 대한 많은 연구가 수행되고 있다. 이러한 항법 시스템의 항법 정확도는 항공기의 안전성과 신뢰성에 직접적인 영향을 끼치기 때문에 항법 시스템의 비행시험 검증은 매우 중요하다. 특히 DGPS/INS 복합항법 장치와 같은 높은 수준의 위치 정확도를 가지는 항법시스템을 검증하기 위해서는 보다 정확한 비행 항법 성능 평가기법이 필요하다. 항법 성능 검증은 DGPS/INS보다 정밀한 항법 정확도를 가지는 기준 궤적과의 비교 분석을 통해 이루어지며 기준 수신기는 수 cm수준의 CDGPS 후처리 기법이 가능한 GPS 수신기를 사용해야 한다. 일반적으로 DGPS/INS 복합항법 장치의 출력 점은 항공기의 무게중심점으로 GPS 안테나의 위치를 출력하는 GPS 수신기와 다르기 때문에 출력데이터의 가공없이 성능 평가를 진행할 경우 추정 오차에 안테나 위치와 항공기의 무게중심점간 거리 오차가 포함된다. 따라서 보다 정확한 항법 성능 평가를 위하여 기준 궤적 생성을 위한 GPS 수신기의 Lever Arm 보정이 필요하다. 본 논문에서는 DGPS/INS 복합항법장치의 비행항법 성능 검증을 위하여 기준궤적의 Lever Arm 보정을 포함한 비행시험 성능평가 절차 및 비행 시험 결과를 제시한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.626-637
• /
• 2014

On ship, especially on large ship, the flexure deformation between Master (M)/Slave (S) Inertial Navigation System (INS) is a key factor which determines the accuracy of the integrated system of M/S INS. In engineering this flexure deformation will be increased with the added ship size. In the M/S INS integrated system, the attitude error between MINS and SINS cannot really reflect the misalignment angle change of SINS due to the flexure deformation. At the same time, the flexure deformation will bring the change of the lever arm size, which further induces the uncertainty of lever arm velocity, resulting in the velocity matching error. To solve this problem, a $H_{\infty}$ algorithm is proposed, in which the attitude and velocity matching error caused by deformation is considered as measurement noise with limited energy, and measurement noise will be restrained by the robustness of $H_{\infty}$ filter. Based on the classical "attitude plus velocity" matching method, the progress of M/S INS information fusion is simulated and compared by using three kinds of schemes, which are known and unknown flexure deformation with standard Kalman filter, and unknown flexure deformation with $H_{\infty}$ filter, respectively. Simulation results indicate that $H_{\infty}$ filter can effectively improve the accuracy of information fusion when flexure deformation is unknown but non-ignorable.

• 제어로봇시스템학회논문지
• /
• 제7권11호
• /
• pp.953-957
• /
• 2001

This paper is concerned with a transfer alignment method for the SDINS under ship motions. Major error sources of transfer alignment are data transfer time-delay, lever-arm velocity and ship body flexure. Specifically, to reduce alignment errors induced by measurement time-delay effects, the error compensation method through delay state augmentation is suggested. A linearized error model for the velocity and attitude matching transfer alignment system is first derived by linearizing the nonliner measurement equation with respect to its time delay and augmenting the delay state into the conventional linear state equations. And then it is shown via observability analysis and computer simulations that the delay state can be estimated and compensated during ship motions resulting in considerably less alignment errors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.486-486
• /
• 2000

This paper is concerned with a transfer alignment method for the SDINS(StrapDown Inertial Navigation System) under ship motions. Major error sources of transfer alignment are data transfer time-delay, lever-arm velocity and ship body flexure. Specifically, to reduce alignment errors induced by measurement time-delay effects, the error compensation method through delay state augmentation is suggested. A linearized error model for the velocity and attitude matching transfer alignment system is first derived by linearizing the nonlinear measurement equation with respect to its time delay and augmenting the delay state into the conventional linear state equations. And then it is shown via observability analysis and computer simulations that the delay state can be estimated and compensated during ship motions resulting in considerably less alignment errors.

• 제어로봇시스템학회논문지
• /
• 제6권12호
• /
• pp.1126-1132
• /
• 2000

In this paper we propose an angular rate and acceleration matching method for initial transfer alignment in aircraft. The conventional angular rate and acceleration matching method performs compensation for the lever arm effects between the master and slave INS before initial alignment. However, the conventional method does not take the flexure angular acceleration into account and thus is not effective when the flexure angular acceleration is large. We propose a new angular rate and acceleration matching method to cope with the flexure acceleration between the master and slave INS and compare the results with those of the conventional method by simulation. The simulation results show that the proposed matching method is better than the conventional matching method in case of large flexure acceleration.

• 한국항공우주학회지
• /
• 제41권2호
• /
• pp.134-141
• /
• 2013

항공기에 탑재되어 운용되는 링레이저 자이로 기반 스트랩다운 관성항법장치(SDINS)와 위성항법장치(GPS)의 결합 시스템의 실시간 구현에 있어서 설계시 고려해야할 문제에 대해서 살펴본다. SDINS/GPS 결합 시스템의 실시간 구현시, 레버암, 측정치 획득 및 오차 보상 외에, 링 레이저 자이로 기반의 SDINS의 특성을 고려해야만 한다. 뱅크턴을 반복적으로 수행하는 항공기에서 발생하는 누적 수직축 자세 오차를 추정하기 위해, 자이로의 비정렬이 모델링된 모델을 구현한다. 항공기 탑재 시험을 통해 수직축 자세 오차의 누적문제 및 실시간 구현 상의 문제를 해결하고, 자세 오차 추정 성능 향상 결과를 살펴본다.