• 전자공학회논문지
• /
• 제54권3호
• /
• pp.138-144
• /
• 2017

본 논문에서는 노인성 난청으로 인한 청력도 감쇄를 보상하는 고주파 증폭 회로를 제안한다. 노인성 난청은 고음역(고주파 대역)의 청력도가 저음역(저주파대역)에 비해 더 떨어지는 저주파 통과 필터의 특성을 보이므로, 보상회로는 임계주파수 이상의 대역에서는 주파수에 비례하여 신호를 증폭하고 임계주파수 이하에서는 증폭도를 일정하게 유지하는 구조이다. 제안된 고주파 회로는 미분기, 단위 이득 증폭기로 구성된다. 임계주파수는 볼륨 조절 레버 형태로 간단하게 제어가 가능한 구조로 노인들이 자신의 난청정도에 따라 쉽게 증폭도를 조절할 수 있다. 고주파 증폭회로의 임계주파수는 가청주파수 전 대역에서 연속적으로 조절 가능하고, 10 kHz 음역의 신호는 80dB 이상 증폭도를 가진다.

• 한국태양에너지학회 논문집
• /
• 제34권2호
• /
• pp.53-59
• /
• 2014

Ice Rink is energy intensive building type. Concern of energy saving from buildings is one of very important issues nowadays. New and renewable energy sources for buildings are especially important when we concern about energy supply for buildings. Among new and renewable energy sources, use of seawater for heating and cooling is an emerging issue for energy conscious building design. The options of energy use from sea water heat sources are using deep sea water for direct cooling with heat exchange facilities, and using surface layer water with heat pump systems. In this study, energy consumptions for an Ice Rink building are analyzed according to the heat sources of air-conditioning systems; existing system and sea water heat source system, in a coastal city, Kangnung. The location of the city Kangnung is good for using both deep sea water which is constant temperature throughout the year less than $2^{\circ}C$, and surface layer water which should be accompanied with heat pump systems. The result shows that using sea water from 200m and 30m under sea lever can save annual energy consumption about 33% of original system and about 10% of that using seawater from 0m depth. Annual energy consumption is similar between the systems with seawater from 200m and 30m. Although the amount of energy saving in summer of the system with 200m depth is higher than that with 30m depth, the requirement of energy in winter of the system with 200m depth is bigger than that with 30m depth.

• 한국정밀공학회지
• /
• 제19권3호
• /
• pp.66-72
• /
• 2002

Electronic Speckle Pattern Interferometry (ESPI) has been recently developed and widely used because it has advantage to be able to measure surface deformations of engineering components and materials in industrial areas with non-contact. The speckle patterns to be formed with interference and scattering phenomena can measure not only out-of-plane but also in-plane deformations, together with the use of digital image equipment to process the informations included in the speckle patterns and to display consequent interferogram on a computer monitor. In this study, the experimental results of a canti-levered plate using ESPI were compared with those obtained from the simple beam theory. The ESPI results of the canti-levered plate analyzed by 4-step phase shifting method are close to the theoretical expectation. Also, out-of-plane displacements of a spot welded cacti-levered plate were measured by ESPI with 4-step phase shifting technique. The phase map of the spot welded cacti-levered plate is quite different from that of the canti-levered plate without spot welding.

• 한국식품위생안전성학회지
• /
• 제11권4호
• /
• pp.315-321
• /
• 1996

Various antimicrobial drug screen tests have been used in order to ensure food safety. However, the conventional screen tests, the Swab Test on Premises(STOP, USA), the Calf Antibiotic and Sulfa Test(CAST, USA) and the European Economic Community 4-plate Test(FPT, EU) are not sufficiently rapid or sensitive enough to detect low levels of sulfa drugs in meat. We developed a new screen test kit for the determination of the antimicrobial residues in meat called the Bacillus megaterium Disk Assay(BmDA). A comparison of BmDA with the older screen tests showed BmDA was as good as the older ones with several advantages. The new test kit is faster-it can be read in 4∼6 hours instead of 16∼18 hours. Moreover, BmDA can discriminate sulfa drugs from other antimicrobial drugs because p-aminobenzoic acid countacts the inhibiting action of sulfa drugs. Minimum detectable levels of sulfa drugs were significantly improved at the lever of 0.025*0.1 pp, compared with the level of 1.0 ppm in FPT. A comparison of BmDA with the older screen tests in HPLC confirmed meat samples exceeded the Korean tolerance value of 0.1 ppm showed BmDA was the most sensitive in the microbiological screen tests. As the microbiological screen tests have already known, a person familiar with simple laboratory techniques should have no difficulty in using it to detect antimicrobial residues in meat. This would be a simple, economic method of antimicrobial residues detection which might be succesfully used by many laboratories.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.2004-2006
• /
• 1996

A thermally driven polysilicon micro actuator has been fabricated using surface micromachining techniques. It consists of P-doped polysilicon as a structural layer and TEOS (tetracthylorthosilicate) as a sacrificial layer. The polysilicon was annealed for the relaxation of residual stress which is the main cause to its deformation such as bending and buckling. And the newly developed HF VPE (vapor phase etching) process was also used as an effective release method for the elimination of sacrificial TEOS layer. The thickneas of polysilicon is $2{\mu}m$ and the lengths of active and passive polysilicon cantilevers are $500{\mu}m$ and $260{\mu}m$, respectively. The actuation is incurred by die thermal expansion due to the current flow in the active polysilicon cantilever, which motion is amplified by lever mechanism. The moving distance of polysilicon micro actuator was experimentally conformed as large as $21{\mu}m$ at the input voltage level of 10V and 50Hz square wave. The actuating characteristics are investigated by simulating the phenomena of heat transfer and thermal expansion in the polysilicon layer. The displacement of actuator is analyzed to be proportional to the square of input voltage. These micro actuator technology can be utilized for the fabrication of MEMS (microelectromechanical system) such as micro relay, which requires large displacement or contact force but relatively slow response.

• 전기학회논문지
• /
• 제57권2호
• /
• pp.245-251
• /
• 2008

Although many studies have been carried out about binary gas mixtures with $SF_6$, few studies were presented about breakdown characteristics of $SF_6/CF_4$ mixtures. At present study the breakdown characteristics of $SF_6/CF_4$ mixtures in non-uniform field was performed. The experiments were carried out under AC voltage and standard lightning impulse(SLI) voltage. Breakdown characteristics were investigated for $SF_6/CF_4$ mixtures when AC voltages and standard lighting impulse voltage was applied in a needle-plane. The needle-plane electrode whose gap distance was 3 mm were used in a test chamber. $SF_6/CF_4$ mixtures contained from 0 to 100% $SF_6$ and the experimental gas pressure ranged from 0.1 to 0.5 MPa. The breakdown characteristics of $SF_6/CF_4$ mixtures in non-uniform field may be influenced by defects like needle-shaped protrusions. In case of slowly rising SLI voltage and AC voltage it is enhanced by corona-stabilization. This phenomena caused by the ion drift during streamer development and the resulting space-charge is investigated. In non-uniform field under negative SLI voltage the breakdown voltage was increase linearly but under positive SLI voltage the breakdown voltage increase non-linearly. The breakdown voltage in needle-plane electrode displayed N shape characteristics for increasing the content of $SF_6$ at AC voltage. $SF_6/CF_4$ mixture has good dielectric strength and arc-extinguishing properties than pure SF6. This paper presents experimental results on breakdown characteristics for various mixtures of $SF_6/CF_4$ at practical pressures. We could make an environment friendly gas insulation material with maintaining dielectric strength by combing $SF_6\;and\;CF_4$ which generates a lower lever of the global warming effect.

• 대한산업공학회지
• /
• 제26권2호
• /
• pp.88-94
• /
• 2000

For efficient operation, vital hand controls must be easily controlled by the operator from his or her normal working position. The primary working area based on the operator-perceived working comfort was developed to serve as a design guideline to the control panel layout. Six male and four female subjects voluntarily participated in the experiment in which working comfort was measured for two types of controls - knob and lever. The operator-perceived working comfort was examined for the frontal and sagittal distances from the body center and the slope of a work surface. The response surface methodology using a central composite design was employed to develop a prediction model for operator's working comfort on each type of controls. The proposed working areas based on the actual working comfort of an operator avoided the dichotomy that considers only the reachability of control devices, and showed a distinct shape, when compared to the existing normal working areas following the Farley's concept. It was shown that the distance from the body to control devices and the slope of a work surface have a quadratic relationship to the working comfort, and that the most comfortable area for seated tasks is located at the distance of about 2∼4 cm in the sagittal direction and about 42∼43 cm in the frontal direction from the shoulder, respectively. It was also found that the working comfort varies within the working area even at the positions with an equal distance from the body. It is expected that the isocomfort working area generated in the study will be used as a useful guideline for control panel layout.

• 조명전기설비학회논문지
• /
• 제23권5호
• /
• pp.96-100
• /
• 2009

산업사회의 발달과 더불어 신뢰성 높은 양질의 전기에너지와 운전 및 보수의 간편화, 계통 운용의 신뢰성, 안전성 확보가 요구되고 있다. 따라서 본 논문은 각종 전력설비에서 $SF_6$을 대체할 수 있는 친환경절연제로 연구되고 있는 $N_2-O_2$ 혼합가스($N_2:O_2=100$ : 0, 79 : 21, 60 : 40, 40 : 60) 절연파괴특성을 구명(究明)하여 이를 $SF_6$가스의 특성과 비교하였다. 이상의 연구 결과, 제조공기와 Dry-Air 절연특성을 구명함으로서 각종 전력응용 설비의 절연설계에 $SF_6$ 대신 친환경적인 모의공기를 사용 가능함을 본 연구에서 구명(究明)하였다. 제조공기를 이용한 친환경적인 절연재 사용으로 지구의 온난화현상 감소에 크게 기여할 것으로 기대된다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권3호
• /
• pp.1111-1116
• /
• 2015

Background: To investigate the relationship between pathologic tumor response to concurrent chemoradiotherapy and variation of serum VEGF in patients with esophageal cancer. Materials and Methods: Forty six patients with esophageal cancer who were treated with concurrent chemo-radiotherapy were enrolled. Endoscopic and pathologic examination was conducted before and four weeks afterwards. Serum level of VEGF was documented before, four weeks later and after chemo-radiotherapy. The relationship between pathologic response and the variation of serum level of VEGF and its influence on the prognosis were investigated. Results: Serum level of VEGF decreased remarkably during and after chemo-radiotherapy in patients whose pathologic response was severe (F=5.393, 4.587, P(0.05). There were no statistical differences of serum VEGF level before, during and after chemo-radiotherapy for patients whose pathologic response was moderate or mild. There were 18 (85.7%), 7 (53.8%) and 6 patients (50.0%) whose serum VEGF level dropped in the severe, moderate and mild group, respectively, with significant differences among these groups (p=0.046). Two year survival rates of patients with severe, moderate and mild pathologic response were 61.9%, 53.8% and 33.3% respectively, and no statistically difference between severe and mild group regarding OS (p=0.245) was tested. Conclusions: Tumor pathologic response during chemo-radiotherapy and the changes of serum VEGF lever could predict curative effects of chemo-radiotherapy in patients with esophageal cancer.

• 대한한방소아과학회지
• /
• 제20권1호
• /
• pp.181-194
• /
• 2006

Objective : Author evaluate the effects of Citri Reticulatae Viride Pericarpium for the bronchial asthma using assesment of the vascular endothelial growth factor after Citri Reticulatae Viride Peicarpium was intravenously administered Ovalbumine(OVA)-sensitized and -challenged mice. Material and Methods : Twenty-four female mice, 8-10 weeks old and free of murine specific pathogens, were sensitized by intraperitoneal injection of OVA. Of the sensitized mice, ten mice didn't administrate Citri Reticulatae Viride Pericarpium and the other ten mice administrated Citri Reticulatae Viride Pericarpium. Mice were sensitized on the first and fourteen days introspectional injection of 20 ${\mu}g$ OVA. After$21^{st}\;22^{th}\;and\;23^{rd}$, the initial sensitization, the mice were challenged for 30 minutes with an aerosol of 1% OVA in saline. Citri Reticulatae Viride Pericarpium administered 200mg/kg in the tail of the mouse, one a day, for 7 days and beginning 14 days after first sensitization. Bronchoalveolar lavage was performed 72 hours after the last challenge, and total cell numbers in the BAL fluid were count. Also, lever of VEGF in the BAL fluid was measured by Enzyme immunoassays and Western blot analysis. Results: Total cell numbers in BAL fluid were significantly greater than from 72 hrs after OVA inhalation compared with cell numbers in the control group. However, there was no difference of the total cell numbers between OVA-challenge groups without Citri Reticulatae Viride Pericarpium, and OVA-challenge with Citri Reticulatae Viride Pericarpium. Enzyme immunoassay revealed that VEGF levels in the BAL fluids were significantly increased 72 hrs after OVA inhalation compared with levels in the control group. After administration of the Citri Reticulatae Viride Pericarpiu, the levels of the VEGF in BAL fluids 72 hrs after OVA inhalation reduced dramatically. Western blot analysis revealed that VEGF protein levels were increased in the all mice which were challenge with OVA, without administered Citri Reticulatae Viride Pericarpium, compared the normal mouse. However, in the groups of the administered Citri Reticulatae Viride Pericarpium, the VEGF protein level markedly decreased. Conclusion: Citri Reticulatae Viride Pericarpium might affect the treatment of the bronchial ashma as a inhibition of the VEGF.