• Journal of Biosystems Engineering
• /
• v.15 no.1
• /
• pp.52-60
• /
• 1990

The main purpose of this report is to analyse the utilization results of farm machinery, farm mechanization rate and influences on the farm household economy. These results are summarized as follows : 1) The annual working days of major farm machinery are from 34.3 to 68.8 days for power tillers and tractors ; 7.9 to 8.5 days for rice transplanters ; 3.6 to 6.9 days for binders ; and, from 18.6 to 20.6 days for combines. Also income and expenditures of the farm management reveals al surplus in major farm machinery except for binders. 2) The popularization rate of major farm machinery is currently low, reaching the level of the early 1970's in Japan and the level of the early 1980's in Taiwan for rice transplanters and harvesters respectively. 3) The farm mechanization rate is 81.7% in plowing & levelling, 66.3% in rice transplanting, 87.5% in pest and disease control, 62.1% in harvesting and 12.5% in drying. However the farm mechanization rate of rice transplanting, harvesting and drying still remains at a low level. 4) The composition rates of farm machinery and implements are 10.2% in farm management expenditures (23.6% in Japan) and 13.2% in fixed capitals (29.4% in Japan) which still reflect a low level, and below that of the 1970's in Japan. From these analysis results, farm mechanization contributes to the improvement of farm management. Nevertheless, the popularization status and mechanization rate are still at a low level in korea. Therefore, it is deemed desirable to furthure promote effective utilization methods and guide farmers in higher safety utilization and management technology.

• Clean Technology
• /
• v.10 no.1
• /
• pp.19-25
• /
• 2004

The leather was fixed with various colors through the dyeing process in leather manufacturing. During the dyeing process, the amount of 30~50% dyestuff which were not bonded with leather drained with waste water. These dyestuff raise lots of environmental problems, so technology for improving the fixing effect, levelling effect and penentration effect with the use of small amount of dyestuff has been required. Also, insufficient color fastness level 2~3 grade for common natural leather needs to be improved at the same time. Accordingly, the use of ultrasound(us) in dyeing process has decreased the amount of dyestuff and obtained the smooth permeability effect. So, we could find that the reduction of amount of dyestuff in wastewater led to decrease in environmental trouble caused by leather waste water with severe contamination degree and improved fastness up to 0.5 grades.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.719-730
• /
• 2001

The purpose of this study is to develop the basic patterns of adult womens brassiere therewith, provide for some basic data useful to the brassiere manufacturing which are both functional and fitting. For this purpose, 220 adults women(aged between 20 and 59) were sampled to be measured for their body sizes and tested for their brassiere wearing. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. In order to develop the basic patterns of adult womens brassieres, 75A size was selected out of 12 size combination(3 women per 75A size) and then, their brassiere fitting was tested. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cups bottom line or lower cups top line, poor shape of upper cups outside top line and shoulder strip position. On the other hand, n the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps interval did not befit the full-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were address for the second test. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. The basic patterns of adult womens brassieres were characterized by a round cup wired as well as a full cup embracing the entire breasts. Each basic pattern which consisted of upper and lower cups was shaped \"straight(-)\". The basic sizes adopted at the first design stage (see fig. 1-2) was 75A of which was designed as upper foundation basic pattern. At the second stage, the upper body foundation pattern were used to design lower cup, upper cup, front panel and wing in their order.(see fig. 3-5, fig. 8)5, fig. 8)

• Journal of Sericultural and Entomological Science
• /
• v.37 no.2
• /
• pp.154-160
• /
• 1995

Dyeing behavior of Silk/Cationic dyeable polyester(CDP) mixed filament was investigated by using a cationic dye. The effect of pH, temperature and additives such as carrier, levelling agent and salt were examined for each silk and CDP component of mixed filament in order to find out the optimum dyeing condition. Based on these results, the dyeing behavior was investigated for Silk/CDP mixed filaments concering various dyeing parameters. The dye adsorption was significantly changed on the dyeing temperature, carrier addition and pH of the dyebath. Specially, the dye migration phynomena were observed for a mixed filament, showing that the dyes initially observed on the surface of silk fiber migrate to the CDP component during a dyeing process. The dyeing of Silk/CDP mixed filaments accompanied by dye migration and as a result, dye adsorption can be developed only for a CDP component. Therefore, the control of dyeing temperature is most important for a Silk/CDP mixed filament, in order that both silk and CDP component are able to be dyed by a cationic dye simultaneously in one bath/one dye system.

• Archives of Reconstructive Microsurgery
• /
• v.2 no.1
• /
• pp.13-19
• /
• 1993

Although the etiology of $Kienb\"{o}ck's$ disease is clearly related to avascular changes in the lunate, but the actual cause leading to this vascular impairment has remained elusive. Therefore, a great many different surgical procedures have been proposed for the correction of the multiple factors leading to lunate collapse or for the treatment of the lunatomalacia. The treatment modalities includes lunate excision, intercarpal arthrodesis, lunate implant resection arthroplasty, joint levelling operation(e.g ulnar lengthening & radial shortening), pronater quadratus pedicle graft and vascular loop graft. In the period from Jan. 1981 to Dec. 1992, we performed operative treatment in 19 cases of $Kienb\"{o}ck's$ disease. Among them, 6 cases were treated with vascular loop graft. We analysed all patients who were treated with vascular loop graft after followed up of 4 year 6 months, on an average(range from 1 year to 8 year 10 months). The results analysed are as follows, 1. All cases were stage III according to Lichtman's classification. 2. Ulnar variance was -1.5(range$-2{\sim}0$), on an average. 3. The average age of patients were 37.7years old(range 31-41). 4. Postoperatively, there were considerable restoration of range of motion and complete relief of pain in all cases, but continued decrease of grip power in one case. 5. Decreased sclerosis, loss of fragmentation and new bone formation were appeared in the last follow up film, in all cases. The vascular loop graft considered as a useful method for the treatment of the $Kienb\"{o}ck's$ disease.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.78-79
• /
• 2012

To improve moving vehicles' accuracy, one-way Network RTK which guarantees high accuracy and integrity regardless the distance from rovers to Reference Station(RS) is being considered. Correction of one-way Network RTK can be generated only after constructing RS network surrounding the rover, therefore a correction discontinuity is inevitably occurred when the RS set has been changed. The discontinuity is not eliminated by the DD(Double Difference) method, and our simulation shows that it causes 13cm(horizontal) and 48cm(vertical) position error. We suggest three solutions to reduce this discontinuity, which are identification of master RS with neighbor networks, duplication of communication module to receive corrections from other network, and ambiguity levelling between neighbor networks.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.35-41
• /
• 1993

The height differences in Mean Sea Level is an important factor in geodetic leveling net, because MSL is the reference datum for height. Geodesists and Oceanographers agree on the height differences in MSL in the east-west direction, but they disagree almost always on the north-south slope, each suspecting systematic errors in the leveling methods of the others. A promising method for determining this slope is comparison of MSL at the tidal station connected by geodetic leveling. The slopes of the sea surface along the coast of Korean Peninsular is estimated from conventional local MSL at the tidal station and bench mark height of first order leveling net in Korea. As a reference level surface, MSL at Inchon is chosen. The results indicate that sea level rises along coast of Korean Peninsular from south to north about 5.5 cm/latitude. In the east-west direction, sea level along East Sea coast stands about 5 cm higher than that along Yellow Sea coast. These are not invariable but provisional phenomena. It may become certain provided that the exact MSL is estimated.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.942-946
• /
• 2007

The new gravity field combination models are expected to improve the knowledge of the Earth's global gravity field. This study evaluates six global gravity field models derived from gravimetry and altimetry surface data in a comparison with ground truth in South Korea. For calculating a more accurate estimate of the geoid heights from the height anomalies, the terrain corrections due to the terrain masses over geoid have considered, the model for the topographic correction is a spherical harmonic expansion of the ETOPO2 DTM model. Geoid heights obtained from GPS and levelling in land area of South Korea are compared with those from the EGMs. The results show that EIGEN-CG03C EGM and EIGEN-GL04C EGM displayed the nearest results to GPS/leveling, and also confirmed the importance of terrain correction for geoid height in case of the uneven topography.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.665-678
• /
• 2007

It was applied the grouting method to fill densely the space between the bottom of the caisson and the ground with the grout mixture mixed with anti-washout admixture after locating accurately the precast caisson on three concrete landing pads but it is far different from a costly conventional method, which place concrete to build the foundation of reinforcement concrete on the spot after excavating inside of the temporary coffering wall for the bridge foundation in the sea. To verify the grouting method in advance, the full-scale trial test was performed twice on the land. After confirming the fluidity of material for the injection and some possible problems during construction and then enhancing the original design, the main process is ongoing and it has been finished 12 spots until now. The purpose of this study is to introduces for the first time in Korea the grouting method including the automatic and the manual monitoring process applied to, based on the main process of the caisson foundation finished already in the site. In a similar construction it is sincerely expected to be referred to in the future.

• Steel and Composite Structures
• /
• v.12 no.4
• /
• pp.291-302
• /
• 2012

Frequently, steel silos are supported by discrete supports or columns to permit easy access beneath the barrel. In such cases, large loads are transferred to the limited number of supports, causing locally high axial compressive stress concentrations in the shell wall above the supports. If not dealt with properly, these increased stresses will lead to premature failure of the silo due to local instability in the regions above the supports. Local stiffening near the supports is a way to improve the buckling resistance, as material is added in the region of elevated stresses, levelling these out to values found in uniformly supported silos. The aim of a study on the properties of local stiffening will then be to increase the failure load, governed by an interaction of plastic collapse and elastic instability, to that of a discrete supported silo. However, during the course of such a study it was found that, although the failure remains local, the cylinder height is also a parameter that influences the failure mechanism, a fact that is not properly taken into account in current design practice and codes. This paper describes the mechanism behind the effect of the cylinder height on the failure load, which is related to pre-buckling deformations of the shell structure. All results and conclusions are based on geometrically and materially non-linear finite element analyses.