• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.338-350
• /
• 2010

As existing materials for ground reinforcement, chemical grout material using cementitous materials and waterglass was used. But many problems in terms of ground reinforcement effects were implicated. In this study, for development and applicability verification of new materials, viscosity, fluidity, permeability, Self-Leveling, keeping of drilled hole, antiwashout underwater, resistance of water (groundwater dilution and minimize material eluting) and the early strength and long-term strength characteristics of developed materials was confirmed, and material standards, and establishing construction standards for the various model tests were conducted. As a result, high viscosity, flowability, permeability and keeping of drilled hole characteristics are excellent, in addition to the early strength properties, dilution does nat occur to groundwater, including groundwater is available for dealing with environmental issues. Application of basic and reinforcement method by Filler function in addition to structure can also or development of a new concept can be expected. In addition, middle and large-diameter drilled shaft, micropile, ground anchors, soil-nailing, steel pipes multi-grouting reinforcement for cement injection process could be used enough to even be considered.

• 대한임베디드공학회논문지
• /
• 제13권5호
• /
• pp.269-277
• /
• 2018

NAND flash memory has widely been used because of non-volatility, low power consumption and fast access time. However, it suffers from inability to provide update-in-place and the erase cycle is limited. The unit of read/write operation is a page and the unit of erase operation is a block. Moreover erase operation is slower than other operations. We proposed the Adaptive Garbage Collection (called "AGC") policy which focuses on not only reducing garbage collection process time for real-time guarantee but also wear-leveling for a flash memory lifetime. The AGC performs better than Cost-benefit policy and Greedy policy. But the AGC does not consider the operation characteristics. So we proposed the Advanced Adaptive Garbage Collection (called "A-AGC") policy which considers the page write operation count and block erase operation count. The A-AGC reduces the write operations by considering the data update frequency and update data size. Also, it reduces the erase operations by considering the file fragmentation. We implemented the A-AGC policy and measured the performance compared with the AGC policy. Simulation results show that the A-AGC policy performs better than AGC, specially for append operation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.41-42
• /
• 2012

High temperature / high pressure spray equipment using a conventional method, unlike spray polyurea adjustable pot life and yellowing caused by UV light and chemicals do not occur, or discoloration of Self-Leveling Type of rugged hand-polyurea resin for technology development is underway. This new concept of polyurea resin roller, brush, airless spray, and they installed easily using the unfamiliar labor, and curing time of approximately four hours to gain control of the glass because it is Pot. Construction, but does not like the spray polyurea resin, compared to the existing degradation of the adhesion strength is concerned. In this study, Self-Leveling Type Manual of polyurea resin adhesion strength of target deterioration Let's minimize problems by reviewing existing domestic and infrastructure long-term durability for long life of the facility is to obtain.

• 소성∙가공
• /
• 제29권5호
• /
• pp.282-289
• /
• 2020

Flexible roll forming is an advanced sheet-metal-forming process that allows the production of parts with various cross-sections. During the flexible process, material is subjected to three-dimensional deformation such as transverse bending, inhomogeneous elongations, or contraction. Because of the effects of process variables on the quality of the roll-formed products, the approaches used to investigate the roll-forming process have been largely dependent on experience and trial- and-error methods. Web-warping is one of the major shape defects encountered in flexible roll forming. In this study, an SVR model was developed to predict the web-warping during the flexible roll forming process. In the development of the SVR model, three process parameters, namely the forming-roll speed condition, leveling-roll height, and bend angle were considered as the model inputs, and the web-warping height was used as the response variable for three blank shapes; rectangular, concave, and convex shape. MATLAB software was used to train the SVR model and optimize three hyperparameters (λ, ε, and γ). To evaluate the SVR model performance, the statistical analysis was carried out based on the three indicators: the root-mean-square error, mean absolute error, and relative root-mean-square error.

• 정보처리학회논문지D
• /
• 제13D권3호
• /
• pp.377-382
• /
• 2006

플래시 메모리의 활용성이 높은 특성으로 인해 모바일 기기와 유비쿼터스 관련 기기에 대한 적용이 확장되고 있다. 하지만, 이러한 경향은 플래시 메모리의 물리적 특성으로 인해 제한 받을 수 있다. 이 논문에서는 플래시 메모리 공간의 재활용을 위한 방법론을 제안하다. 이 방법론은 메모리 재활용에 필요한 비용과 재활용 성능을 동시에 최적화하는 것을 목표로 한다. 제안하는 방법론은 특정시간에 재사용되는 메모리 세그먼트를 선택할 때 대상이 되는 메모리 공간을 다수의 하부 공간으로 분할하여 탐색 비용을 최적화한다. 아울러, 자유 세그먼트의 선택이라는 측면에서 전체 메모리 공간의 균등한 소거를 위한 방법론 또한 논의한다. 제안된 방법론들은 기존의 방법론과 함께 실험을 통해 검증하였으며, 방법론의 수행을 위한 최적화된 시스템 구성을 실험을 통하여 밝혔다.

• 전자공학회논문지CI
• /
• 제47권4호
• /
• pp.71-81
• /
• 2010

그리드 시스템에서 리스트 스케줄링 기반의 알고리즘을 사용한 태스크 스케줄링은 프로세서의 완전 연결된 환경에서 낮은 시간 복잡도와 높은 효율성을 보여준다. 하지만 기존 알고리즘은 태스크 간의 통신비용 및 옵티컬 그리드 환경에서 통신이 이루어지는 경로인 lightpath의 구성 과정을 충분히 고려하지 않았다. 본 논문에서는 옵티컬 그리드 환경에 최적화 된 방향성 비순환 그래프(Directed Acyclic Graph, DAG)를 계층화하여 태스크의 할당 우선순위를 결정하는 계층화 선택 알고리즘인 LSOG(Leveling Selection in Optical Grid)을 제안한다. 이 알고리즘은 동일한 계층 내 태스크들의 할당 우선순위를 결정할 때 부모 태스크와 통신비용이 가장 큰 태스크를 먼저 수행한 뒤 각각의 네트워크에서 태스크 간의 통신이 이루어지는 가장 짧은 길이의 경로를 고려한다. 이 과정은 옵티컬 그리드 환경에서 링크 리소스 사용을 최적화하여 스케줄링 과정의 통신비용을 개선시킨다. 기존의 알고리즘 중 ELSA (Extended List Scheduling Algorithm)와 SCP (Scheduled Critical Path) 알고리즘을 LSOG 와 비교한 결과 CCR 값의 증가와 네트워크 환경이 원활함에 따라 전체 스케줄링 성능이 향상되는 것을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.43-44
• /
• 2011

Building materials are used in combination and new materials are appearing every moment. Although the performance of building materials influence on whole building performance critically, there is no obvious classification. In this study, the term 'user requirement, functional requirement' is define. This research provides leveling performance of requirement and functional requirement.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.67-72
• /
• 2010

Recently increasing application of flash memory in mobile and ubiquitous related devices is due to its non-volatility, fast response time, shock resistance and low power consumption. Following this trend, SSD(Solid State Disk) using multiple flash chips, instead of hard-drive based storage system, started to widely used for its advantageous features. However, flash memory based storage subsystem should resolve the performance bottleneck for writing in perspective of speed and lifetime according to its disadvantageous physical property. In order to provide tangible performance, solutions are studied in aspect of reclaiming of invalid regions by decreasing the number of erasures and distributing the erasures uniformly over the whole memory space as much as possible. In this paper, we study flash memory recycling algorithms with multiple management units and demonstrate that the proposed algorithm provides feasible performance. The proposed method utilizes the partitions of the memory space by utilizing threshold values and reconfigures the management units if necessary. The performance of the proposed policies is evaluated through a number of simulation based experiments.

• 반도체디스플레이기술학회지
• /
• 제7권3호
• /
• pp.17-21
• /
• 2008

Application of flash memory in mobile and ubiquitous related devices is rapidly being increased due to its low price and high performance. In addition, some notebook computers currently come out into market with a SSD(Solid State Disk) instead of hard-drive based storage system. Regarding this trend, applications need to increase the storage capacity using multiple flash memory chips for larger capacity sooner or later. Flash memory based storage subsystem should resolve the performance bottleneck for writing in perspective of speed and lifetime according to its physical property. In order to make flash memory storage work with tangible performance, reclaiming of invalid regions needs to be controlled in a particular manner to decrease the number of erasures and to distribute the erasures uniformly over the whole memory space as much as possible. In this paper, we study the performance of flash memory recycling algorithms and demonstrate that the proposed algorithm shows acceptable performance for flash memory storage with multiple chips. The proposed cleaning method partitions the memory space into candidate memory regions, to be reclaimed as free, by utilizing threshold values. The proposed algorithm handles the storage system in multi-layered style. The impact of the proposed policies is evaluated through a number of experiments.

• 산업기술연구
• /
• 제19권
• /
• pp.31-42
• /
• 1999

This paper presents a method for evaluating the performance of a leaf spring suspension and an air spring suspension systems for trucks in terms of ride and handling. Leaf springs, which generally have non-linear progressive force-deflection characteristics, are modeled using beam and contact elements. The leaf spring analysis model shows good correlation with experimental results. Each component of an air spring suspension system, which is a single leaf, air spring, height control valve, compressor and linkages, is modeled appropriately. Non-linear characteristics of air spring are accounted for using the measured data, and pressure and volume relations for height control system is also considered. The wheel rate of the air suspension is taken lower but roll stiffness is taken higher than those of leaf springs to improve ride and handling performance, which is verified through driving simulations.