• 제목/요약/키워드: Level switch

검색결과 397건 처리시간 0.031초

시뮬레이션을 통한 정류형 초전도 전류발생장치의 동작특성해석 (The Analysis of operational characteristic of superconducting current generator by computer simulation)

  • 추용;주민석;홍중배;고태국
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 A
    • /
    • pp.95-97
    • /
    • 1995
  • A superconducting current generator, or a superconducting rectifier(SCR) is used as a current source to energize a superconducting magnets in SMES, MRI. We selected a full-wave SCR among various SCR models and analyzed its operational characteristics by computer simulation. In process of pumping the current, the improvement of performance is dependent on how much bigger the open resistance of the switch is in comparison to load coil impedance when one of two switches become active. Faster transfer can he seen in resistive commutation mode by shortening the time elapsed for the resistance to arrive at certain level from zero state. Although recovery time for the switch has no direct effect on current pumping, optimal switch design is needed to increasing operational frequency.

  • PDF

수평 구동형 MEMS 관성 스위치 설계 및 성능해석 (Design and Performance Analysis of Lateral Type MEMS Inertial Switch)

  • 김학성;장승교
    • 한국항공우주학회지
    • /
    • 제48권7호
    • /
    • pp.523-528
    • /
    • 2020
  • 스프링-메스 시스템의 원리를 이용하여 수평 구동형 MEMS 관성 스위치를 설계하였다. 본 MEMS 스위치는 외부에서 발생하는 가속도를 감지하여 점화안전장치를 장전시키는 역할을 한다. 성능 모델링을 통하여 다양한 가속도 조건에서의 구동 양상을 분석하였다. 시뮬레이션 결과 가속도의 기울기가 10g/msec 이하인 경우에 MEMS 스위치는 10g에서 잘 작동하는 것으로 나타났다. 반면에, 설계 변수들의 공차를 10%로 고려한 시뮬레이션 결과 스프링 폭과 길이에 의해 임계 동작 가속도가 규격(10±2g)을 벗어났다. 제작 공정상 10% 이하의 공차 관리가 어려운 스프링 폭을 두 배로 늘렸을 때 규격을 만족하는 것을 확인하고 설계보완을 제안하였다.

IGBT를 사용한 고전압 스위치에 관한 연구 (Study on High Voltage Switch Using IGBT)

  • 박성수;김성철;조무현;남궁원
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 A
    • /
    • pp.556-558
    • /
    • 1996
  • PLS 2-GeV linac has 11 sets of high power klystron-modulator system as a main RF source for the beam acceleration. The modulators can provide 200-MW peak pulsed power(400-kV, 500-A) with a pulse width of $7.5{\mu}s$(ESW), a maximum pulse repetition rate of 120-Hz at the full power level. The DC power supply provides a 25-kV, 7-Adc and the charging system consists of a charging inductor, charging capacitor, and the diode for reverse current protection. The charged PFN voltage by a LC resonant charging method has two times of the DC high voltage and the pulsed power is delivered to the load by a thyratron switch. To reduced the press of high voltage lit thyratron switch, the command charging is the best method. In this article, the high voltage switch for the command charging method is tested to the start work and the system is presented with the experiment results of the trigger and operational characteristics.

  • PDF

셀 스케줄러의 설계에 관한 연구 (A Study on Design of Cell Scheduler)

  • 손승일;박노식
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2003년도 춘계종합학술대회
    • /
    • pp.390-393
    • /
    • 2003
  • 본 논문에서는 ATM 교환기의 스위치 패브릭을 효과적이고, 빠르게 중재할 수 있는 Cell 스케줄링 알고리즘의 구현에 대해 연구한다. 본 논문에서 설계하는 ATM 셀 스케줄러는 iSLIP 알고리즘을 기본으로 하고 있으며, 이의 고속 구현에 대해 연구한다. 구현되는 셀 스케줄러는 random uniform 트래픽에 대해 100%에 수렴하는 스케줄링 성능을 제공하고 있다. 따라서 본 연구에서는 기본적인 스케줄러의 구조를 제안하고, 이를 HDL로 모델하여 동작 수준 및 타이밍 시뮬레이션을 완료하였다. 그리고 본 논문에서 설계된 셀 스케줄러는 8 포트를 지원하도록 설계하였으며, 이를 기반으로 하여 32 포트로 확장할 수 있다. 8 포트를 지원하는 스케줄러는 grant 및 accept 스테이지를 각각 2단 파이프라인 방식으로 설계하였다.

  • PDF

능동소자를 이용한 이중편파 특성의 마이크로스트립 안테나 설계 (A Design of Dual-Polarized Microstrip Antenna Using the Active Devices)

  • 임규재;윤현보
    • 한국통신학회논문지
    • /
    • 제19권3호
    • /
    • pp.573-581
    • /
    • 1994
  • Feed horn polarizer나 F.R.R.S(Fraday Rotation Rotary Switch)에 비해 소형이고 GaAs MESFET소자 스위칭으로 좌수와 우수 원형편파의 선택적 수신이 가능한 이중편파 마이크로스트립 안테나를 설계하였다. 원형편과 마이크로스트립 안테나의 공진 주파수, 입력 임피던스, 빔 패턴 등은 FDTD 방법을 이용하여 정확하게 계산하였으며, 급전 회로의 GaAs MESFET 증폭기 스위칭 회로가 ON 상태일 경우의 증폭기 이득을 포함한 안테나 이득은 16.6dB 이고, OFF 상태일 경우의 격리 특성은 -24dB로 나타남을 실험으로 확인하였다. 또한, 제작된 이중편과 마이크로스트립 안테나의 3dB 이하 축비는 11.813GHz에서 30 이하로 나타났다.

  • PDF

간선 및 분기선의 개폐기 설치 효과 분석(I) (Reliability analysis of the switch installation in the main feeder and in the radial/loop lateral feeders in distribution system)

  • 조남훈;오재형;이흥호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 A
    • /
    • pp.79-82
    • /
    • 2002
  • The addition of switches to a distribution feeder does, in general, increase reliability by decreasing the duration of the outage of many to the customers on the feeder. To cover its service area so that feeder-level delivery reaches sufficiently close to all customers, feeders typically split their routes many times, in what is often called a lateral feeder. It is interesting to note, however, that the effectiveness of a switch is very much dependent on the types of lateral feeder. The types of lateral are classified into two types. The first is loop lateral feeder that can connect its load to an adjacent feeder through a tie line in case that a fault occurs in its feeder and it is laid out so that every feeder has complete fault backup through re-switching of its loads to other sources like a main feeder. The second is the radial lateral feeder cannot connect its load to an adjacent line, no provision is made for contingency backup of feeders. There are no other circuits in the radial lateral feeder form which to restore power. In this study, we evaluate the effectiveness of a switch installation between on the radial and loop lateral feeders to increase reliability by decreasing the duration of the outage. These results can help power utility to design the switch layouts on the radial and loop lateral feeder system.

  • PDF

A 0.13 ${\mu}m$ CMOS UWB RF Transmitter with an On-Chip T/R Switch

  • Kim, Chang-Wan;Duong, Quoc-Hoang;Lee, Seung-Sik;Lee, Sang-Gug
    • ETRI Journal
    • /
    • 제30권4호
    • /
    • pp.526-534
    • /
    • 2008
  • This paper presents a fully integrated 0.13 ${\mu}m$ CMOS MB-OFDM UWB transmitter chain (mode 1). The proposed transmitter consists of a low-pass filter, a variable gain amplifier, a voltage-to-current converter, an I/Q up-mixer, a differential-to-single-ended converter, a driver amplifier, and a transmit/receive (T/R) switch. The proposed T/R switch shows an insertion loss of less than 1.5 dB and a Tx/Rx port isolation of more than 27 dB over a 3 GHz to 5 GHz frequency range. All RF/analog circuits have been designed to achieve high linearity and wide bandwidth. The proposed transmitter is implemented using IBM 0.13 ${\mu}m$ CMOS technology. The fabricated transmitter shows a -3 dB bandwidth of 550 MHz at each sub-band center frequency with gain flatness less than 1.5 dB. It also shows a power gain of 0.5 dB, a maximum output power level of 0 dBm, and output IP3 of +9.3 dBm. It consumes a total of 54 mA from a 1.5 V supply.

  • PDF

3종류의 다단계 스깊-로트 샘플링 검사계획의 비교 (A comparison of three-types of multi-level skip-lot)

  • 최병철;강찬기
    • 응용통계연구
    • /
    • 제10권2호
    • /
    • pp.375-384
    • /
    • 1997
  • 본 연구에서는 가장 수월한 검사계획의 성격을 띄는 Choi(1993)의 검사계획과 까다로운 검사계획의 성격을 띄는 Choi(1995)의 검사계획의 중간 단계인 보통검사계획의 성격을 띄는 사슬모양의 다단계 스킵-로트 샘플링 검사계획을 설계하였다. 이 검사계획에서는 각 단계의 검사에서 정해진 갯수의 로트가 연속적으로 합격될 때에는 다음 단계의 검사로, 로트가 불합격될 때에는 그 전전 단계의 검사로 전환하도록 되어 있다. 마코프 연쇄를 이용하여 사슬모양의 3단계 스킵-로트 샘플림 검사계획의 검사특성곡선, 평균검사갯수와 평균출검품질을 구하여 Choi(1993) 및 Choi(1995)의 검사계획들과 그 성질을 비교하였다.

  • PDF

Synergistic Interactions Between Chitinase ChiCW and Fungicides Against Plant Fungal Pathogens

  • Huang, Chien-Jui;Chen, Chao-Ying
    • Journal of Microbiology and Biotechnology
    • /
    • 제18권4호
    • /
    • pp.784-787
    • /
    • 2008
  • Antifungal activity of ChiCW and synergistic interactions between ChiCW with fungicides were investigated. Conidial germinations of phytopathogenic fungi, Alternaria brassicicola, Botrytis elliptica, and Colletotrichum gloeosporioides, were inhibited by ChiCW but A. longipes was not. In addition, ChiCW showed synergistic effect with fungicides Switch (cyprodinil+fludioxonil) and tebuconazole to inhibit fungal conidial germinations. The level of synergism of ChiCW with tebuconazole was higher than that with Switch. The results indicate that ChiCW may exhibit a higher level of synergism with fungicides that have a primary effect upon membranes.

Effects of transforming growth factor .betha.1 and interleukin-2 on IgA isotype switching at the clonal level

  • Kim, Pyeung-Hyeun
    • 미생물과산업
    • /
    • 제16권3호
    • /
    • pp.2-5
    • /
    • 1990
  • IgA is the predominant immunoglobulin isotype in mucosal secretions(1). It has been reported that a population of Peyer's patch T cells can selectively induce IgM bearing B cells to switch to surface IgA bearing B cells(2,3). Further, IL-4, IL-5, and IL-6 alone and in combination, can significantly influence murine IgA B cell differentiation in vitro(4-7). However, it remains an open question which cytokines have a major role in class switching to the IgA isotype. Recently, it has been reported that transforming growth factor .betha.1(TGF .betha.1) alone, or in combination with IL-2 increases IgA secretion by LPS-activated surface IgA negative (sIgA$\^$-/) murine spleen B cells while concurrently downregulating IgM and IgG secretion by such cells(8-11). In the present study, limiting dilution analysis was used to demonstrate, at the clonal level, that TGF .betha.1 has siginificant activity as an IgA isotype switch factor.

  • PDF