• ETRI Journal
• /
• 제34권6호
• /
• pp.800-806
• /
• 2012

Transmission performances of direct detection-based 100-Gb/s modulation formats are investigated and compared for metro area optical networks. The effects of optical signal-to-noise ratio sensitivity, chromatic dispersion, cross-channel nonlinearity, and transmission distance on the performance of differential 8-ary phase-shift keying (D8PSK), differential phase-shift keying plus three-level amplitude-shift keying (DPSK+3ASK), and dual-carrier differential quaternary phase-shift keying (DC-DQPSK) are evaluated. The performance of coherent dual-polarization quadrature phase-shift keying (DP-QPSK) with block phase estimation and coherent DP-QPSK with digital differential detection are also presented for reference. According to our analysis, all three direct detection modulation formats could transmit a 100-Gb/s signal over several hundred kilometers of a single-mode fiber link. The results also show that DC-DQPSK outperforms D8PSK and DPSK+3ASK, and the performance of DC-DQPSK is comparable to that of coherent DP-QPSK with digital differential detection. The maximum transmission distance of DC-DQPSK is over 1,000 km, which is enough distance for metro applications.

• 한국통신학회논문지
• /
• 제15권10호
• /
• pp.797-810
• /
• 1990

The error rate equations of digitally modulated signals transmitted through the Gaussian noise and tone multiple interference channel have been derived. Using the derived equations of error probabilities in the environments of Gaussian noise tone interferer and Gaussian noise multiple interferer, the error rate performances of various digitally modulated signals have been evaluated, and compared in graphs as a function of average carrier to tone interferer power ratio(CIR), average carrier to multiple interferer power ratio(CIT) and the average carrer-to-Gaussian noise powr ratio(CIR). In this paper, the modulation schemes such as amplitude shift keying (ASK), phase shift keying(PSK), frequency shift keying(FSK), minimum shift keying(MSK), quadrature amplitud modulation(QAM) and amplitude phase shift keying(APK) have been selected for the study of performance comparison. The results of comparison show us that, in low bits/sec/Hz, PSK is superior to the other schemes, but in high bits/sec/Hz, mixed multi ary type is better than single multi ary type. And in strong noise evironment, the multiple interferer has much influence than tone interferer, however, in low noise environment. the mojor error factor is tone interferer. But tone interference effect nearly disappears over specified CIR level about 20[dB]. And the modulation schemes using amplitude are heavily influenced by multiple interference.

• 문화기술의 융합
• /
• 제6권4호
• /
• pp.323-329
• /
• 2020

본 연구의 목적은 병원근무 여성 간호사의 우울 정도를 확인하고, 순환 교대근무와 수면의 질이 우울에 미치는 영향을 규명하기 위한 것이다. 연구대상자는 서울지역 2개 대학병원에 근무하는 총 295명의 간호사로 수집된 자료는 기술통계 및 다중회귀분석을 이용하여 분석하였다. 연구결과 참여자의 71.2%가 우울한 것으로 응답했으며(CES-D 총점 ≥ 16), 간호사 우울의 유의한 영향요인으로는 수면의 질, 순환 교대근무, 근무기간(1-2.9년, 10년 이상)으로 나타났다. 본 연구결과를 바탕으로 여성 간호사들의 우울을 감소시키기 위해서는 수면의 질과 순환 교대근무의 부정적 영향을 개선 시킬 수 있는 중재가 마련되어야 할 것으로 고려된다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.10-15
• /
• 2012

In conventional, skin detection methods using for skin color definitions is based on prior knowledge. By experimentation, the threshold value for dividing the background from the skin region is determined subjectively. A drawback of such techniques is that their performance is dependent on a threshold value which is estimated from repeated experiments. To overcome this, the present paper introduces a skin region detection method. This method uses a histogram approximation based on the mean shift algorithm. This proposed method applies the mean shift procedure to a histogram of a skin map of the input image. It is generated by comparing with the standard skin colors in the $C_bC_r$ color space. It divides the background from the skin region by selecting the maximum value according to the brightness level. As the histogram has the form of a discontinuous function. It is accumulated according to the brightness values of the pixels. It is then, approximated by a Gaussian mixture model (GMM) using the Bezier curve technique. Thus, the proposed method detects the skin region using the mean shift procedure to determine a maximum value. Rather than using a manually selected threshold value, as in existing techniques this becomes the dividing point. Experiments confirm that the new procedure effectively detects the skin region.

• Journal of Information Display
• /
• 제6권1호
• /
• pp.28-32
• /
• 2005

The electronic structures of Al/RbF/tris-(8-hydroxyquinoline)aluminium ($Alq_3$) and $Al/CaF_2/Alq_3$interfaces were investigated using x-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). For both systems, the UPS showed a significant valence band shift following the deposition of the thin fluoride layers on $Alq_3$. However, the formation of gap state in valence region and the extra peak N 1s core level spectra showed different trends, suggesting that the alkali fluoride and alkali-earth fluoride interlayer have different reaction mechanisms at the interface between Al cathode and $Alq_3$. In addition, the deposition of Al has considerably less effect on the valence band shift compared to the deposition of both RbF and $CaF_2$. These results suggest that the charge transfer across the interface and the resulting gap state formation may have lesser effect on the enhancement of organic light-emitting device performance than the observed valence band shift, which is thought to lower the electron injection barrier.

• 대한전자공학회논문지SD
• /
• 제48권10호
• /
• pp.25-32
• /
• 2011

MLC NAND flash memory에서 cell간의 기생 커패시턴스 커플링으로 인해 발생하는 CCI에 의한 data error를 개선하기 위한 알고리듬을 제안하였다. 종래의 victim cell 주변 8-cell model보다 에러보정 알고리듬에 적용이 용이한 3-cell model을 제시하였다. 3-cell CCI model의 성능을 입증하기 위해 30nm와 20nm급 공정의 MLC NAND flash memory의 data분포를 분석하여, 주변 cell의 data pattern에 의한 victim cell의 Vth shift관계를 확인하였다. 측정된 Vth분포 data에 MatLab을 이용하여 제안된 알고리듬을 적용하는 경우 BER이 LSB에서는 28.9%, MSB에는 19.8%가 개선되었다.

• 한국수산과학회지
• /
• 제36권4호
• /
• pp.389-401
• /
• 2003

The changes in structure and abundance of taxon or species groups in the East Sea ecosystem were compared between pre- and post-Climatic Regime Shift (CRS) occurred in the mid 1970s using an ECOPATH model. Although the East Sea ecosystem consisted of primary producers, primary consumers, secondary consumers and terminal consumers most species groups were classified as secondary consumers. The mean trophic level between pre- and post-CRS increased from 3.09 during the pre-CRS period to 3.28 during the post-CRS period. Total biomass of the species groups in the East Sea ecosystem increased by $9\%$ due to the CRS, and total catch increased by $48\%.$ The most significant differences between pre- and post-CRS models occurred at the mid/high trophic levels occupied by fishes and cephalopods. Relative contribution of the different species groups to the total energy flow was calculated for the trophic level III. As a result, the status by the dominant species in the East Sea ecosystem shifted from cephalopods to walleye pollock due to the CRS. Relative contribution of 5 species, which were commercially important, such as Pacific saury, Pacific sardine, filefish, walleye pollock and sandfish in trophic level III, were also changed due to the CRS. Finally, the CRS turned out to cause large variations in biomass and catch of fisheries resources as well as the status and role of the major species.

• 품질경영학회지
• /
• 제12권2호
• /
• pp.6-10
• /
• 1984

A model for obtaining optimal resetting period and optimal target value of the process quality level is proposed when the quality characteristic is subject to a linear shift in mean. Different sales conditions are considered where good items can he sold at a regular price and bad items at a discounted one. Some numerical examples are also given.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.32.5-32
• /
• 2002

Processing plasmas are playing a crucial role in either depositing thin films or etching fine patterns. Any variability in process factors (such as radio frequency power or pressure) can cause a significant shift in plasma state. When this shift becomes large enough to change operating condition beyond an acceptable level, overall product quality can greatly be jeopardized. Thus, timely and accurate diagnosis of plasma malfunction is crucial to maintaining device yield and throughput. Many diagnostic systems have been developed, including HIPOCRATES [1] and PIES [2]. Plasma equipment was also diagnosed by combining neural network and expert system called Dempster-Schafer Theory [3]. A fact c...

• 산업경영시스템학회지
• /
• 제40권1호
• /
• pp.165-172
• /
• 2017

Machines are physically or chemically degenerated by continuous usage. One of the results of this degeneration is the process mean shift. Under the process mean shift, production cost, failure cost and quality loss function cost are increasing continuously. Therefore a periodic preventive resetting the process is necessary. We suppose that the wear level is observable. In this case, process mean shift problem has similar characteristics to the maintenance policy model. In the previous studies, process mean shift problem has been studied in several fields such as 'Tool wear limit', 'Canning Process' and 'Quality Loss Function' separately or partially integrated form. This paper proposes an integrated cost model which involves production cost by the material, failure cost by the nonconforming items, quality loss function cost by the deviation between the quality characteristics from the target value and resetting the process cost. We expand this process mean shift problem a little more by dealing the process variance as a function, not a constant value. We suggested a multiplier function model to the process variance according to the analysis result with practical data. We adopted two-side specification to our model. The initial process mean is generally set somewhat above the lower specification. The objective function is total integrated costs per unit wear and independent variables are wear limit and initial setting process mean. The optimum is derived from numerical analysis because the integral form of the objective function is not possible. A numerical example is presented.