• Title/Summary/Keyword: Level Plate

Search Result 935, Processing Time 0.029 seconds

High Velocity Impact Analysis of Kevlar29/Phenolic Composite Plate (케블라 복합재 평판의 고속충돌 특성 수치해석)

  • Ahn, Jeoung-Hee;Kweon, Jin-Hwe;Choi, Jin-Ho
    • Composites Research
    • /
    • v.22 no.2
    • /
    • pp.18-23
    • /
    • 2009
  • Failure of Kevlar29/Phenolic composite plate under high velocity impact of FSP(Fragment Simulation Projectile) is investigated using a non-linear explicit finite element code, LS-DYNA. Composite laminate and impactor are idealized by solid element and interface between laminas are modeled by tied-break element in LS-DYNA. Interaction between impactor and laminate is simulated face-to-face eroding contact algorithm. When the stress level meets a failure criteria, the layer in the element is eroded. Numerical results are verified by existing test results.

Pseudo-static solution of active earth pressure against relief shelf retaining wall rotating around heel

  • Yun Que;Jisong Zhang;Chengcheng Long;Fuquan Chen
    • Geomechanics and Engineering
    • /
    • v.39 no.1
    • /
    • pp.87-104
    • /
    • 2024
  • In practical engineering, the design process for most retaining walls necessitates careful consideration of seismic resistance. The prevention of retaining wall overturning is of paramount importance, especially in cases where the foundation's bearing capacity is limited. To research the seismic active earth pressure (ES) of a relieving retaining wall rotating around base (RB), the shear dissipation graphs across various operating conditions are analyzed by using Optum software, and the earth pressure in each region was derived by the inclined strip method combined with the limit equilibrium method. By observing shear dissipation graphs across various operating conditions, the distribution law of each sliding surface is summarized, and three typical failure modes are obtained. The corresponding calculation model was established. Then the resultant force and its action point were obtained. By comparing the theoretical and numerical solutions with the previous studies, the correctness of the derived formula is proved. The variation of earth pressure distribution and resultant force under seismic acceleration are studied. The unloading plate's position, the wall heel's length, and seismic acceleration will weaken the unloading effect. On the contrary, the length of the unloading plate and the friction angle of the filling will strengthen the unloading effect. The derived formula proposed in this study demonstrates a remarkable level of accuracy under both static and seismic loading conditions. Additionally, it serves as a valuable design reference for the prevention of overturning in relieving retaining walls.

Antimutagenic and Cytotoxic Effects of Ethanol Extracts from Five Kinds of Seaweeds (다섯 가지 해조류 에탄올 추출물의 항돌연변이 활성 및 암세포 성장억제 효과)

  • Kim, Sung-Ae;Kim, Jin;Woo, Mee-Kyung;Kwak, Chung-Shil;Lee, Mee-Sook
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.34 no.4
    • /
    • pp.451-459
    • /
    • 2005
  • The protective effects of ethanol extracts from 5 seaweeds on the mutagenic and cytotoxic damage were evaluated. They were separately extracted using ethanol from dried samples at room temperature, and freeze-dried. The inhibition effects on the mutagenicity in Salmonella assay by Ames test and cancer cell inhibitory effect in HeLa cell, MCF-7 cell and SNU -638 cell by MTT assay were assayed. Seaweed fusiforme, sea tangle and green laver showed strong inhibitory effect against 2-nitrofluorene, sodium azide- or 2-anthramine-induced mutagenicities in Salmonella Typhimurium TA 98 and TA 100 at the level of 2.5 mg ethanol extract per plate. Cancer cell inhibitory effect was shown with all of the seaweed extracts. Green laver, sea mustard, sea tangle and seaweed fusiforme showed strong cytotoxicity against HeLa and MCF-7 cells, with inhibiting by $92\~93\%$ and $89\~92\%$, respectively. These data show that 5 seaweeds tested in this study might be potent functional foods for cancer prevention, and consumption of these seaweeds in adequate amount is recommended.

Cross-Sectional Item Response Analysis of Geocognition Assessment for the Development of Plate Tectonics Learning Progressions: Rasch Model (판구조론의 학습발달과정 개발을 위한 지구적 인지과정 평가의 횡단적 문항 반응 분석: Rasch 모델)

  • Maeng, Seungho;Lee, Kiyoung
    • Journal of The Korean Association For Science Education
    • /
    • v.35 no.1
    • /
    • pp.37-52
    • /
    • 2015
  • In this study, assessment items to examine geocognition on plate tectonics were developed and applied to middle and high school students and college students. Conceptual constructs on plate tectonics are Earth interior structure, specific geomorphology, and geologic phenomena at each plate boundary. Construct for geocognition included temporal reasoning, spatial reasoning, retrospective reasoning, and system thinking. Pictorial data in each item were all obtained from GeoMapApp. Students' responses to the items were analyzed and measured cross-sectionally by Rasch model, which distinguishes persons' ability levels based on their scores for all items and compared them with item difficulty. By Rasch model analysis, Wright maps for middle and high school students and college students were obtained and compared with each other. Differential Item Functioning analysis was also implemented to compare students' item responses across school grades. The results showed: 1) Geocognition on plate tectonics was an assessable construct for middle and high school students in current science curriculum, 2) The most distinguished geocognition factor was spatial reasoning based on cross sectional analysis across school grades, 3) Geocognition on plate tectonics could be developed towards more sophisticated level through scaffolding of relevant instruction and earth science content knowledge, and 4) Geocognition was not a general reasoning separated from a task content but a content-specific reasoning related to the content of an assessment item. We proposed several suggestions for learning progressions for plate tectonics and national curriculum development based on the results of the study.

Some Toxic Heavy Metals Transferring Rates to Decoction of Five Most Generally Adopting Herbal Medicinal Prescriptions (다섯 가지 다용한약처방의 전탕 전후 유해 중금속 이행률 조사)

  • Kim, Kee Dong
    • Journal of Society of Preventive Korean Medicine
    • /
    • v.19 no.3
    • /
    • pp.103-113
    • /
    • 2015
  • Objective : Five most generally adopting basic oriental prescriptions (yookmijihwangtang, ojeoksan, sipjeondaebotang, samultang, bojoongikgitang) samples were collected from 10 oriental hospitals nationwide and the transferring ratio to aqueous phase (TRAP) were calculated. Method : The samples are grounded evenly and the decocted at $120^{\circ}C$ for 12 min on hot plate and then filtered. The concentrations of As, Cd, Co, Cr and Pb in before and after decoction were measure by ICP/MS and the TRAPs were calculated. Results : The concentrations of As, Cr and Pb in the ground samples before decoction were all below criteria level, and TRAP values were also very low (<10%). For Cd, although some ground samples before decoction showed relatively high concentration level compare to the criteria level, because of their low TRAP (~3%), the actual concentrations in the decoction were quite low compare the criteria level. The Co's concentrations in the ground samples before decoction were all relatively low level. However, the TRAP of Co was astonishingly high value of around 40% average. Conclusion : The toxic heavy metal concentrations in the decoction were very low compare to the criteria level. The TRAPs are less than <10% except Co. The toxic heavy metals in the prescriptions are mainly remained in the residue and the only very small fraction may transferred to the decoctions. Therefore the toxicity of the oriental herbal medicine about the toxic heavy metal may be overstressed. The Co's TRAP turned out to be quite high value (40% average). Since the criteria level wes not established yet, the safety of decoctions according to Co was not fully confirmed.

The Effects of Task Difficulty Controlled by Surface Condition During Bridging Exercise on Relative Multifidus Activation Ratio (교각 자세 운동 시 지지면 불안정성을 통한 과제 난이도가 다열근의 선택적 근활성도 비에 미치는 영향)

  • Song, Eun-Ju;Choi, Jong-Duk
    • Physical Therapy Korea
    • /
    • v.18 no.3
    • /
    • pp.59-66
    • /
    • 2011
  • The purpose of this study is to examine the activity ratios of global trunk muscles and local trunk muscles in relation to adjustments in the level of task difficulty while performing stability exercises in easily applied bridging lumbar stabilization exercise. Twenty healthy subjects performed bridging lumbar stabilization exercise while the level of task difficulty was plate was used in the same posture for all the exercises. EMG was used to examine the activity ratios of the global muscles and multifidus in relation to the level of task difficulty. Moreover, the activity ratios of the multifidus muscle, the erector spinae and the gluteus maximus muscle were measured. A one-way ANOVA with repeated measures was used, and a Bonferroni correction was conducted (${\alpha}$=.05). When the bridging lumbar stabilization exercise were performed at different difficulty levels, the activity of the multifidus muscle, which is a local muscle, was high in all three exercises. Also, compared to low intensity and intermediate intensity exercises, high intensity exercises showed more significant differences (${\alpha}$=.05). Among all the muscles, the multifidus showed the highest activity at intermediate intensity. Based on these results, we suggest that in the case of bridging lumbar stabilization exercise, low intensity or intermediate intensity exercises are more suitable and efficient for local muscle stabilization.

A Biomechanical Analysis of Lower Extremity Kinematics and Kinetics During Level Walking (평지를 걸어갈 때 하지운동과 작용하는 하중에 대한 생체역학적 해석)

  • Son, Kwon;Choi, Gi-Yeong;Chung, Min-Keun
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.18 no.8
    • /
    • pp.2101-2112
    • /
    • 1994
  • A two-dimensional biomechanical model was developed in order to calculated the lower extremity kinematics and kinetics during level walking. This model consists of three segments : the thigh, calf, and foot. Each segment was assumed to be a rigid body ; its motion to be planar in the sagittal plane. Five young males were involved in the gait experiment and their anthropometric data were measured for the calculation of segmental masses and moments of inertial. Six markers were used to obtain the kinematic data of the right lower extremity for at least three trials of walking at 1.0m/s, and simultaneously a Kistler force plate was used to obtain the foot-floor reaction data. Based on the experimental data acquired for the stance phase of the right foot, calculated vertical joint forces reached up to 0.91, 1.05, and 1.11 BW(body weight) at the hip, the knee, the ankle joints, respectively. The flexion-extension moments reached up to 69.7, 52.3, and 98.8 Nm in magnitude at the corresponding three joints. It was found that the calculated joint loadings of a subject were statistically the same for all his three trials, but not the same for all five subjects involved in the gait study.

Heavy-weight Impact Noise Reduction of Concrete Slab Reinforcement Using F.R.P (F.R.P 재료 보강에 의한 신개념 중량충격음 저감대책)

  • Jeong, Jeong-Ho;Yoo, Seung-Yup;Lee, Pyoung-Jik;Jeon, Jin-Yong;Jo, A-Hyoung
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2005.05a
    • /
    • pp.383-386
    • /
    • 2005
  • Low frequency heavy-weight impact noise is the most irritating noise in Korean high-rise reinforced concrete apartment buildings. This low frequency noise is generated by foot traffic due to the fact that Koreans do not wear shoes at home. The transmission of the noise is facilitated by a load bearing wall structural system without beams and columns which is used in these buildings. In order to control low frequency heavy-weight impact noise, floating floors using isolation materials such as glass-wool mat and poly-urethane mat are used. However, it was difficult to control low frequency heavy-weight impact sound using isolation material. In this study, reinforcement of concrete slab using beams and plate was conducted. Using the FEM analysis, the effect of concrete slab reinforcement using FRP(fiber-glass reinforced plastic) on the bang machine impact vibration acceleration level and sound were conducted at the standard floor impact sound test building. The $3{\sim}4dB$ floor impact vibration acceleration level and impact sound pressure level were reduced and the natural frequency of slabs were changed.

  • PDF

Effect of Fat Level and the Ripening Time on Quality Traits of Fermented Sausages

  • Yim, Dong-Gyun;Jang, Kyoung-Hwan;Chung, Ku-Young
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.29 no.1
    • /
    • pp.119-125
    • /
    • 2016
  • The objective of this study was to investigate the effect of the fat reduction on the physicochemical and microbiological characteristics of fermented sausages during ripening and drying. Low fat fermented sausages were produced with different fat levels (30%, 20%, 10%, and 5%) under ripening conditions and fermented process. Samples from each treatment were taken for physicochemical and microbiological analyses on the 0, 1, 2, 3, 4, 5, 7, 10, 14, and 21st day of ripening. In proximate analysis, the fat reduction in sausages produced an increase in moisture, protein and ash contents during ripening and drying (p<0.05). The weight losses were significantly higher in high fat formulations during the first 4 days, whereas those were higher in low fat ones after 10 days of storage (p<0.05). Fat reduction was responsible for an increase in shear force values after 3 days of storage. The volatile basic nitrogen (VBN) value of the low fat samples was significantly higher (p<0.05). Low fat sausages reduced the extent of lipid oxidation. The lower fat level produced redder sausages. Total plate bacteria and Pseudomonas counts of sausages showed no significant differences. Production of low fat sausages resulted in the physicochemical and microbiological attributes equal to or better than the high fat sausages without negative effects, except only a higher VBN and weight loss.

Microbiological quality of raw milk in Jeiu (제주도내 목장원유의 미생물학적 분석)

  • 김은주;정경주;김진영;김진회;전창익;이두식;임윤규
    • Korean Journal of Veterinary Service
    • /
    • v.24 no.1
    • /
    • pp.89-94
    • /
    • 2001
  • In order to investigate the relationship between milk hygienic quality and some environmental factors such as the herd size and types of milking machines, we sampled and examined the level of total bacterial count, coliforms, Staphyococcus aureus, somatic cell counts(SCC) and fat rates in raw milk. of the 84 dairy farms, the prevalence of level on number of standard plate count over 100,000cfu/$m\ell$ and coliforms over 1,000cfu/$m\ell$ in bulk milk were 25.0% and 15.6%, respectively. Also, 2 farms(2.4%) were exceed the level on number of 500cfu/$m\ell$ S aureus in raw milk. The prevalence of dairy herd with first grade of total bacterial count(TBC) according to bucket, pipe line and parlour milking system was 40.0%, 74.0% and 84.0%, respectively. The prevalence of dairy herd with first grade of TBC according to grade 1, 2 and 3 by SCC was 77.8%, 83.2%. and 69.2%, respectively. Therefore, the relationships between hygienic quality in raw milk and the herd size, types of milking machines, were significant. In conclusion, this study could be overemphasized the importance of herd management condition for milk hygienic qualify.

  • PDF