• Journal of the Korean Geotechnical Society
• /
• v.34 no.3
• /
• pp.29-41
• /
• 2018

In the case of the enlargement levee on the soft foundation, the existing levee and the enlargement levee connection can be damaged due to heterogeneous subsidence such as differential settlement at the joint of the box culvert passing through the levee. This study selected the downstream region of the Geum River and then confirmed the influence of the piping possibility on the levee by performing a 2D seepage analysis and analyzing the seepage tendency according to the position of the box culvert's gate. As a result, the flow velocity and the hydraulic gradient are larger in the upper breakage than the lower breakage, and the upper leak was more vulnerable to the piping than the lower leak. If leaks occur in the gate located on the riverside land, the risk of piping is increased when the water level rises and is maintained highly. In the case of the gate located on the inland, it could be predicted that the leakage could damage the stability of levee by increasing the water pressure inside the levee. As a result, if leakage occurs at any position in the box culvert, the pore water pressure is increased or decreased compared with the case when no leakage occurs. Therefore, if the pore water pressure is drastically reduced or increased compared with the normal case, leakage may occur. However, the result of this study is based on a 2D seepage analysis, and it is likely to be different from actual cases. Therefore, more detailed analysis by 3D analysis is recommended.

• Ecology and Resilient Infrastructure
• /
• v.7 no.3
• /
• pp.181-188
• /
• 2020

In this study, a temperature distribution sensing method using optical fiber was applied to a large-scale levee experiment, and the applicability of wide-area levee or embankment monitoring technology to observe the changes inside the levee was reviewed. The optical fiber was buried in a large-scale levee, and the temporal and spatial temperature changes were measured according to the water level changes in the reservoir. As the water level of the reservoir increased, the temperature of the embankment slope decreased, and as the infiltration progressed, a change in the spatial location of the temperature change was detected. The temperature change due to embankment infiltration varied depending on the time of the infiltration progress, and the change assumed to be the seepage line could be observed. This study has demonstrated that information about temperature changes inside the levee can be interpreted as the information on the locations that are judged to be relatively vulnerable, investigating the changes in the condition inside the levee.

• Journal of Korea Water Resources Association
• /
• v.48 no.4
• /
• pp.269-279
• /
• 2015

Nowadays, the world has suffered by natural disaster of climate change due to global warming. Korea has also faced with similar situation. To prevent these natural disaster, Four Major River Management has conducted. One of conducted content in Four Major River Management is the levee maintenance which classified into fill-up the inland, levee of reinforcement and so on. These maintenances may make the characteristics of groundwater flow change and affect to the levee safety (piping phenomenon). Therefore, analysis on groundwater fluctuation according to level of riverside and inland should be required. This study focus on levee of Hoe stream, which is connected to Nakdong river, and piping safety factor in the levee analyzed by using pore water pressure. Besides, groundwater fluctuation, which is depended on level of riverside and inland, is simulated by using the SEEP/W (2D ground water model). This simulation considered steady flow and unsteady flow. As a result, piping safety factor increased due to rising the inland level. Piping safety factor of riverside was effected by only river water level. Therefore, external levee factor considering inland level raising and suitable control of river water level is need to increase piping safety factor.

• Journal of Advanced Research in Ocean Engineering
• /
• v.1 no.1
• /
• pp.1-13
• /
• 2015

Post-Katrina investigations revealed that most earthen levee damage occurred on the levee crest and landward-side slope as a result of either wave overtopping, storm surge overflow, or a combination of both. In this paper, combined wave overtopping and storm surge overflow of a levee embankment strengthened with high performance turf reinforcement mat (HPTRM) system was studied in a purely Lagrangian and meshless approach, two-dimensional smoothed particle hydrodynamics (SPH) model. After the SPH model is calibrated with full-scale overtopping test results, the overtopping discharge, flow thickness, flow velocity, average overtopping velocity, shear stress, and soil erosion rate are calculated. New equations are developed for average overtopping discharge. The shear stresses on landward-side slope are calculated and the characteristics of soil loss are given. Equations are also provided to estimate soil loss rate. The range of the application of these equations is discussed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.704-715
• /
• 2008

The Aim of this development is the management of a forecasting analysis program based on a real-time remote sensing data. Using this program it is possible to predict a failure of levee facilities in advance. therefor, it is necessary for making plans of a safety countermove. In this development we have researched the analysis method which could operate effectively the levee facilities using real-time monitoring data from a remote sensing system and the safety managerial program using the algorism from the analysis method developed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.680-688
• /
• 2008

On behalf of hazard mitigation, cases of investigation methods on levee are described. In general, failures of levee are caused by piping, water leakage through ground under the levee in Kimpo, Ilsan etc. Several phenomena against levees should be protected through consideration of analysis and quality control stage during construction. In this paper, protection methods against failures should be investigated by case studies.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09c
• /
• pp.49-54
• /
• 2010

In order to study the performance of levees reinforced with steel sheet piles under high water condition, a series of model tests was conducted by simulating the high water condition before and after applying severe seismic loading history. As a result, the seepage behavior through the subsoil layers underlying the levee was not significantly affected by the seismic loading history. It was also verified that, irrespective of the seismic loading history, the sheet piles installed at the levee crest or shoulder are effective in preventing the breakage of levees caused by overflow. In addition, applicability of drainage works at the foot of the levee in preventing the seepage failure was confirmed.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.4
• /
• pp.1-9
• /
• 2015

According to national regulations and its commentary, such as Rivers Design Criteria & Commentary (KWRA, 2009), Foundation Structure Guideline and its Commentary(MLTM, 2014 and KGS, 2009), the integrity evaluation of river levee includes slope stability evaluation of both riverside/protected low-land and piping stability evaluation with respect to foundation and levee body along with water level conditions. In this case the design hydro-graph can be the most important input factor for the integrity evaluation, however it is fact that the national regulations do not provide any proper determination methods regarding hydro-graph. The authors thus executed an integrity evaluation of sluice gate in levee by changing each hydro-graph factor, including rising ordinary water level, lasting flood water level, falling water level, and flood frequency, in order to suggest a determination method of reasonable hydro-graph. As a result, the authors suggested that at least over 57 hours of rising ordinary water level and over 53 hours of lasting flood water level should be considered for the design hydro-graph of sluice gate in levee at Mun-san-jae.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.1-8
• /
• 2018

Levee breaches can result from flooding due to torrential rainfalls, which are linked with recent abnormal climates and the aging of river levees. Breaches have caused enormous property damage and human casualties in lowland areas. Overtopping was found to be the cause for approximately 40% of all cases of breach. In this study, the reasons and mechanisms behind levee breaches were analyzed using hydraulic model testing. The overtopping stability and time delay effect of breaches were assessed for levees made with a new environmentally friendly substance. Image analysis revealed that the total breach time of the levees made with the new substance was about 2.25 times greater than that of an earthen levee. The initial breach rate of a general earthen levee was about 1.43 times higher than that of levees covered with the new substance, and the body collapsed rapidly. The breach mechanisms of levees covered with the new substance were completely different, and it is possible to prevent rapid breaches by mitigation of the breach speed on the slope by resisting overtopping.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.2
• /
• pp.15-21
• /
• 2012

It is difficult to determine the strength and the permeability of a soil levee quantitatively because the damages of a levee have been evaluated only by visual inspection in Korea. Therefore, it is necessary to develop a simplified measurement device for measuring the strength and permeability of a levee. In this paper, a new in-situ permeability measuring device which can measure strength and permeability based on GWP is developed and its applicability to the field permeability test of a soil levee is introduced. From the laboratory and in-situ experiments, the new measuring device has the potential of measuring the soil permeability simply and accurately.