• 제목/요약/키워드: Less affected side

검색결과 93건 처리시간 0.026초

Behavioral and cardiac responses in mature horses exposed to a novel object

  • Lee, Kyung Eun;Kim, Joon Gyu;Lee, Hang;Kim, Byung Sun
    • Journal of Animal Science and Technology
    • /
    • 제63권3호
    • /
    • pp.651-661
    • /
    • 2021
  • This study aimed to investigate whether breed, sex, and age affected temperament differently (more or less neophobic) in mature horses during a novel object test. The study included Jeju crossbred (n = 12, age = 9.42 ± 4.57 y), Thoroughbred (n = 15, age = 10.73 ± 3.09 y), and Warmblood horses (n = 12, age = 13.08 ± 3.55 y) with the females (n = 22, age = 11.36 ± 4.24 y) and geldings (n = 17, age = 10.65 ± 3.66 y). Jeju crossbreds (Jeju horse × Thoroughbred) are valuable considering their popular usage in Korea, but limited studies have explored temperament of Jeju crossbred horses. A trained experimenter touched the left side of the neck with a white plastic bag (novel object). The test ended when the horse stopped escape response and heart rate (HR) dropped to baseline. Behavioral score and escape duration were measured as behavioral variables. Multiple variables related to HR and heart rate variability (HRV) were measured to reflect emotional state. These included basal HR (BHR), maximum HR (MHR), delay to reach maximum heart rate (Time to MHR), standard deviation of beat-to-beat intervals (SDNN), root mean square of successive differences (RMSSD), and ratio of low to high frequency components of a continuous series of heartbeats (LF/HF). Statistics revealed that Thoroughbreds had significantly higher behavioral scores, and lower RMSSD than Jeju crossbreds (p < 0.05), suggesting greater excitement and fear to the novel object in Thoroughbreds. None of the behavioral or cardiac parameters exhibited sex differences (p < 0.05). Age was negatively correlated with SDNN and RMSSD (p < 0.05), indicating that older horses felt more anxiety to the novelty than younger horses. Thoroughbreds and females had distinct correlations between behavioral and HRV variables in comparison with other groups (p < 0.05), implying that escape duration might be a good indicator of stress, especially in these two groups. These results are expected to improve equine welfare, safety and utility, by providing insights into the temperament of particular horse groups, to better match reactivity levels with specific functions.

턱관절 장애 유무에 따른 깨물근의 두께와 턱관절 가동범위의 비대칭성 비교 (Comparison of Asymmetries on Masseter Muscle Thickness and Range of Motion in Subject With and Without Temporomandibular Disorders)

  • 이지원;양연주;원종임
    • 한국전문물리치료학회지
    • /
    • 제26권1호
    • /
    • pp.28-36
    • /
    • 2019
  • Background: Temporomandibular disorder (TMD) is characterized by pain and limited range of motion in the jaw. TMD patients generally prefer to chew on the unaffected or less-affected side, and this tendency often results in asymmetries in masseter muscle thickness and range of mandibular motion. Objects: The purpose of this study was to compare the asymmetries in masseter muscle thickness and range of mandibular motion in subjects with and without temporomandibular disorders. Methods: Thirty-nine subjects were divided into two groups: A TMD group ($n_1=19$) and a control group ($n_2=20$). The jaw opening range and laterotrusion were measured using a digital vernier caliper. The masseter muscle thickness was examined in both the resting state and the maximal clenching state using ultrasonography. The absolute asymmetry indices calculated based on the laterotrusion and masseter muscle thickness of the respective right and left sides. A two-way ANOVA and a Mann-Whitney U test were used for statistical analysis. Results: No significant different was found in the masseter muscle thickness between the TMD and control group. A significant difference was found in the absolute asymmetry indices of mandibular laterotrusion between the TMD and control groups (p<.05). Furthermore, the ranges of jaw opening were significantly different between males and females (p<.05). The absolute asymmetry index values of masseter muscle thickness at rest and during maximal clenching were also significantly different between males and females (p<.05). Conclusion: These results demonstrated that the subjects with TMD had a larger degree of asymmetry in laterotrusion than those without TMD. Therefore, a physiotherapy program needs to be designed to restore normal laterotrusion capacities for TMD subjects. These results also showed that female subjects had greater absolute asymmetry indices in masseter muscle thickness than male subjects. Therefore, more training is needed to promote bilaterally balanced chewing among women.

The Impact of Optical Illusions on the Vestibular System

  • Ozturk, Seyma Tugba;Serbetcioglu, Mustafa Bulent;Ersin, Kerem;Yilmaz, Oguz
    • Journal of Audiology & Otology
    • /
    • 제25권3호
    • /
    • pp.152-158
    • /
    • 2021
  • Background and Objectives: Balance control is maintained in stationary and dynamic conditions, with coordinated muscle responses generated by somatosensory, vestibular, and visual inputs. This study aimed to investigate how the vestibular system is affected in the presence of an optical illusion to better understand the interconnected pathways of the visual and vestibular systems. Subjects and Methods: The study involved 54 young adults (27 males and 27 females) aged 18-25 years. The recruited participants were subjected to the cervical vestibular evoked myogenic potentials (cVEMP) test and video head impulse test (vHIT). The cVEMP and vHIT tests were performed once each in the absence and presence of an optical illusion. In addition, after each test, whether the individuals felt balanced was determined using a questionnaire. Results: cVEMP results in the presence of the optical illusion showed shortened latencies and increased amplitudes for the left side in comparison to the results in the absence of the optical illusion (p≤0.05). When vHIT results were compared, it was seen that the right lateral and bilateral anterior canal gains were increased, almost to 1.0 (p<0.05). Conclusions: It is thought that when the visual-vestibular inputs are incompatible with each other, the sensory reweighting mechanism is activated, and this mechanism strengthens the more reliable (vestibular) inputs, while suppressing the less reliable (visual) inputs. As long as the incompatible condition persists, the sensory reweighting mechanism will continue to operate, thanks to the feedback loop from the efferent vestibular system.

The Impact of Optical Illusions on the Vestibular System

  • Ozturk, Seyma Tugba;Serbetcioglu, Mustafa Bulent;Ersin, Kerem;Yilmaz, Oguz
    • 대한청각학회지
    • /
    • 제25권3호
    • /
    • pp.152-158
    • /
    • 2021
  • Background and Objectives: Balance control is maintained in stationary and dynamic conditions, with coordinated muscle responses generated by somatosensory, vestibular, and visual inputs. This study aimed to investigate how the vestibular system is affected in the presence of an optical illusion to better understand the interconnected pathways of the visual and vestibular systems. Subjects and Methods: The study involved 54 young adults (27 males and 27 females) aged 18-25 years. The recruited participants were subjected to the cervical vestibular evoked myogenic potentials (cVEMP) test and video head impulse test (vHIT). The cVEMP and vHIT tests were performed once each in the absence and presence of an optical illusion. In addition, after each test, whether the individuals felt balanced was determined using a questionnaire. Results: cVEMP results in the presence of the optical illusion showed shortened latencies and increased amplitudes for the left side in comparison to the results in the absence of the optical illusion (p≤0.05). When vHIT results were compared, it was seen that the right lateral and bilateral anterior canal gains were increased, almost to 1.0 (p<0.05). Conclusions: It is thought that when the visual-vestibular inputs are incompatible with each other, the sensory reweighting mechanism is activated, and this mechanism strengthens the more reliable (vestibular) inputs, while suppressing the less reliable (visual) inputs. As long as the incompatible condition persists, the sensory reweighting mechanism will continue to operate, thanks to the feedback loop from the efferent vestibular system.

라이시미터에서 지하수위에 따른 보리, 밀, 조의 수분이용효율 특성 (Water Use Efficiency of Barley, Wheat and Millet Affected by Groundwater Table under Lysimeter)

  • 김범기;공효영;심재식;홍순달
    • 한국토양비료학회지
    • /
    • 제43권3호
    • /
    • pp.253-259
    • /
    • 2010
  • 본 연구는 휴경논 벼 대체작물로서 보리, 밀, 조의 수분스트레스에 대한 생육특성을 비교하기 위하여 실시하였다. 라이시미터를 이용하여 지하수위를 0, 25, 50, 75, 100 cm의 5개 수위로 처리하여 지하수위에 따른 생체량과 증발산량 및 증산량을 조사하고 수분이용효율 특성과 작물별 적정 지하수위를 추정하였다. 보리, 밀, 조 모든 작물은 과습에 대한 내성이 약하였으며 작물별로는 보리 > 조 > 밀의 순이었다. 지상부 건물중 1 g을 생산하는데 소요된 증발산량으로 나타낸 증발산비율로 비교할 경우 보리는 166~605 mL, 밀은 136~481 mL, 조는 81~418 mL의 분포로서 보리 > 밀 > 조의 순이었고 100 cm 지하수위에서 0 cm 지하수위로, 즉 수분포화 조건으로 갈수록 증발산 비율은 증가되었다. 지하수위에 따른 지상부 건물중의 회귀식으로부터 최대 건물중을 나타내는 지하수위는 밀이 76 cm로 평가되었고 보리와 조의 경우는 지하수위가 낮아질수록 거의 직선적으로 증가되는 경향을 보이며 처리구 시험범위 밖인 100 cm 이하로 평가되었다. 작물 재배기간 동안 토양의 용적수분 함량은 작물에 의한 수분흡수량만큼 모세관을 통한 수분공급량이 부족하여 재배기간이 경과할수록 급격하게 감소되는 경향을 보였다.

원자력급 흑연의 산화 정도에 따른 초음파특성 변화 및 초음파탐상의 타당성 연구 (Feasibility of Ultrasonic Inspection for Nuclear Grade Graphite)

  • 박재석;윤병식;장창희;이종포
    • 비파괴검사학회지
    • /
    • 제28권5호
    • /
    • pp.436-442
    • /
    • 2008
  • 최근 VHTR(very high temperature reactor)에 대한 연구에서 흑연이 노심내 구조재, 반사재, 감속재로서 가장 적절한 재료로 인식되고 있다. 운전온도는 약 $900^{\circ}C$로 원자로 내부에 유입되는 소량의 불순물에도 흑연은 산화되기 쉬우며 산화된 흑연은 공극률이 증가하며 구조재료로서 가져야 할 파괴인성이 낮아진다. 본 연구에서는 산화 전후의 흑연에 대하여 초음파특성을 측정하고, 이를 기반으로 흑연에 대한 초음파탐상검사의 유효성을 타진하였다. 흑연의 초음파특성 측정 결과 초음파속도는 탄소강의 약 1/2, 음파 감쇠는 5배 이상, 신호대잡음비는 약 1/3로 측정되었다. 산화 후, 초음파속도는 as-received 상태에 비하여 미소하게 감소되었으나 초음파감쇠는 200% 이상으로 그 차이가 두드러지게 나타났다. 신호대잡음비에 기반하여 POD (probability of detection)을 산출한 결과, 100 mm 미만의 깊이를 가지는 측면공(SDH; side drilled hole)는 산화 전후에 큰 차이를 나타내지 않으므로 해당 깊이를 가지는 결함에 대해서 초음파탐상검사는 비교적 신뢰성 있는 검사를 수행할 수 있다고 판단된다. 상용 자동초음파탐상 장비에서의 테스트 결과 80 mm이하의 깊이에서는 인적오류가 크지 않을 것으로 예상할 수 있었으며, 위상배열 초음파 기법을 통한 검사를 수행한 결과 역시 양호한 신호대잡음비로 측면공들을 모두 검출할 수 있었다.

신선 동결 동종 아킬레스건을 이용한 전방 십자인대 재건술 (Reconstruction of Anterior Cruciate Ligament with Fresh-frozen Achilles Allograft)

  • 최남용;한석구;나기호;서상일;이도성;송현석
    • 대한관절경학회지
    • /
    • 제8권1호
    • /
    • pp.26-30
    • /
    • 2004
  • 서론: 만성 전방 십자인대 손상 환자에서 신선 동결 동종 아킬레스건을 이용하여 관절경적 전방 십자인대 재건술을 시행 후 임상적 결과를 후향적으로 분석하였다. 방법: 1999년 1월부터 2001년 2월까지 만성 전방 십자인대 손상에 대하여 동종 아킬레스건을 이용하여 재건술을 시행 후 1년 이상 추시가 가능하였던 38예를 대상으로 하였다. 남자가 32예, 여자가 6예였으며, 평균 연령은 32.4세 (20${\sim}$50세)였으며, 수상 원인은 교통 사고와 스포츠 손상이 대부분(89.5%)을 차지하였다. 수상 후 수술까지의 기간은 평균 4.2개월이었고 수술 후 추시 기간은 평균 19.2개월(12-36)이었다. 수술 후 평가는 관절 운동범위, Lachman 및 pivot-shift 검사, KT-1000 관절계를 통한 경골의 전방 전위정도를 측정하였으며, 슬관절 기능적 평가는 Lysholm 슬관절 점수와 modified Feagin score를 측정하였다. 결과: 모든 예에서 술 후 관절 운동범위의 제한은 없었으며, Lachman 및 pivot-shift 검사에서 37명 환자(97.4%)가 정상 또는 grade 1의 안정성을 보였다. KT-1000 관절계를 이용한 경골의 전방전위는 20 Ib 부하시 정상 측과 비교하여 평균 2.1 mm의 차이를 나타내었다. Lysholm 슬관절 점수는 술 전 평균 65점에서 술 후 90점으로 향상되었으며, Modified Feagin score에 의한 평가는 89.5%에서 만족스러운 결과를 보였다. 결론: 전방 십자인대 손상에서 신선 동결 동종 아킬레스건을 이용한 재건술을 시행하여 임상적으로 만족스러운 결과를 얻을 수 있었으며, 자가 조직에 대한 우수한 대체물로 사료된다.

  • PDF

DGPS와 Motion Sensor를 이용한 선박 동적 거동특성 (Dynamic Behavior Character of Vessel Using DGPS and Motion Sensor)

  • 최철웅;김연수
    • 대한공간정보학회지
    • /
    • 제12권4호
    • /
    • pp.35-43
    • /
    • 2004
  • 다중빔 음향탐사 시스템(Multibeam Echosounder system : MBES)은 넓은 지역을 소해측량(swath)하여 전자해도 제작, 고정밀 DEM 획득, 동영상 제작 등에 활용하는 최신 수로측량기술이다. MBES의 정확도향상 연구를 위한 기초연구로서 DGPS와 움직임측정센서(Motion senser)의 측정값을 비교 분석하여 선박의 동적 거동특성을 연구하였다. DGPS를 선체 전후, 좌우에 설치하여 측량한 GPS 위치 값의 수신정확도는 Roll은 ${\pm}0.0016^{\circ}$, Pitch는 ${\pm}0.0009^{\circ}$로 움직임측정센서 값의 정확도 평가가 가능한 양호한 정도를 얻었다. DGPS와 움직임측정센서의 Heading, Pitch, Roll 상관관계는 모두 정상관 관계를 나타냈다. 또한, 각 변화량에 따른 편차량의 상관관계는 정상관 관계이나 탐사선의 급회전, 진동 등과 같은 요소에 의해 편차가 발생 될 것으로 사료된다. GPS에 의한 조위변화량, Heave값은 움직임측정센서 값과 유사하며, GPS속도는 설치장소에 따라 변화가 있어 영향이 가장 적은 선박의 중심선에 설치하는 것이 적당하다. MBES Processor 장치에 입력되는 자이로, 움직임측정센서 값이 DGPS 실시간 관측 값보다 자이로는 15초, Pitch, Roll, Heave는 13초 시간차가 있어 MBES 최종값의 정확도에 영향을 줄 수 있는 것으로 사료된다.

  • PDF

일부 금속 및 기계제품 제조업체 근로자들의 산업재해($1980{\sim}1981$)에 관한 조사 (An Epidemiological Study on the Industrial Injuries among Metal Products Manufacturing Workers in Young-Dung-Po, Seoul)

  • 이정희
    • Journal of Preventive Medicine and Public Health
    • /
    • 제15권1호
    • /
    • pp.187-196
    • /
    • 1982
  • 1980. 1. 1부터 1981. 12. 31까지 만 2년간 서울 영등포 지역의 12개 금속 및 기계제품 제조업체 근로자들의 산업재해의 특성을 조사하여 얻은 결과는 다음과 같다. 1. 재해 발생율은 근로자 1000명당 45.7이며 남자 54.0, 여자 17.5로 남자에서 약 3배 이상 많이 발생하고 규모가 클수록 발생율이 감소하는 경향을 보였다. 2. 재해자들의 연령별 발생율은 19세 미만이 83.5로 제일 높고 $40{\sim}49$세가 가장 낮았다. 3. 근속 연수별 발생 분포는 1년 이하인 자가 48.1%로 근속연수가 짧을수록 재해빈도는 높았다. 4, 작업 개시 후 시간적 변동에 따른 발생율은 작업 개시 후 3시간이 6.0, 7시간이 6.1로 두 정점을 이루었다. 5. 요일별 재해 발생율은 월요일이 8.4(18.3%)로 가장 높았고 일요일이 가장 낮았다. 6. 월별 재해 발생율은 7월에 5.4(11.8%)로 가장 높았고 다음이 3월로 4.8(10.5%)였다. 계절별 발생율은 봄철에 13(28.4%)로 가장 높았다. 7. 재해원인별 발생빈도는 기계에 의한 것이 37.5%로 가장 높고, 다음이 기구없이 취급, 낙하물, 충돌에 의한 것이 각각 17.2%, 14.2% 및 10.2%를 차지하였다. 8. 상해 부위별 발생빈도는 상지부(上肢部)가 58.8% 하지부(下肢部)가 25.5%로 상하지(上下肢)가 전체의 84.3%였으며 이중 수지(手指)가 40.3%로 빈도가 제일 높았으며 좌우별 분포는 우측이 10%정도 많았다. 9. 상해 종류별 발생빈도는 열창 및 좌창이 34.0%로 가장 높았고 다음이 골절 및 탈구로 31.9%, 염좌 8.1%의 순이었다. 10. 요양 기간별 발생 분포는 2주에서 1개월이 54.4%로 가장 높았고 1개월 미만이 전체의 68.9%로 대부분이었으며 업체 규모가 클수록 치료기간이 연장되는 경향을 보였다. 11. 산재분 재해 대 비산재분 재해의 비율은 1:4.7이었다.리양상(解離樣相)은 거의 비슷하게 완만(緩慢)하였다. 4. 이상(以上)의 소견(所見)으로 미루어 볼 때 임신부(姙娠婦)의 CO 중독(中毒)은 산모(産母)보다 태아(胎兒)에서 더 큰 위해(危害)를 초래(招來)할 가능성(可能性)이 크며 또 HbF의 구성점유율(構成占有率)이 높은 6개월(個月) 이하(以下)의 영아에서도 그 위해도(危害度)가 클 것으로 간주(看做)된다. 따라서 임신부(姙娠婦) 또는 생후(生後) 6개월(個月) 이하(以下)의 영아가 CO 중독(中毒)되었을 때는 고압산소요법(高壓酸素療法)이 효과적(效果的)인 치료법(治療法)으로 보이며 그 치료시간(治療時間)을 성인환자(成人患者)에 있어서의 그것보다 좀 더 길게하는 것이 CO 중독(中毒)에 의한 위해(危害)를 감소(減少)시켜 줄 것으로 기대(期待) 된다. 있었다. 또한 공정 중 microwave와 autoclaving은 4가지 수산식품 낙지, 조기, 홍어, 새우의 allergenicity를 현저히 감소시키는 것으로 나타났다. 반면에 자외선은 단백질로 구성된 allergen의 구조는 크게 변화시키지 못하는 것으로 보여진 것을 알 수 있다. 그러므로 생선의 가공방법은 통조림 가공이나 microwave 처리가 allergenicity성을 감소시킬 수 있는 것으로 보여진다. 낙지, 조기, 홍어, 새우의 한외여과 fraction중 고분자인 100,000이상에서만 allergenicity가 나타났다. 따라서 이 allergen들의 분자량은 100,000 이상으로 추정되며 검색된 allergynicity 생선을 10,000∼100,000으로 한외여과 하였을 때 100,000 이상의 fraction에서만 PCA에 의해 allergenicity가 있는 것으로 인정되었다. 그러나 이 검색된 생선이 anaphylaxis가 인간에게서까지도 반응할지는 의문이다. 이 연구의 결과는 차후 임상실험환자에 의하여 최종 검증되어야 한다.일정한 관련성을 나타내지 않았다. 이상의 결과로

  • PDF

EH36-TM강의 대입열 EGW 용접부 저온 인성에 미치는 미세 조직의 영향 (Effects of Microstructures on the Toughness of High Heat Input EG Welded Joint of EH36-TM Steel)

  • 최우혁;조성규;최원규;고상기;한종만
    • Journal of Welding and Joining
    • /
    • 제30권1호
    • /
    • pp.64-71
    • /
    • 2012
  • The characteristics of high heat input (342kJ/cm) EG (Electro Gas Arc) welded joint of EH36-TM steel has been investigated. The weld metal microstructure consisted of fine acicular ferrite (AF), a little volume of polygonal ferrite (PF) and grain boundary ferrite (GBF). Charpy impact test results of the weld metal and heat affected zone (HAZ) met the requirement of classification rule (Min. 34J at $-20^{\circ}C$). In order to evaluate the relationship between the impact toughness property and the grain size of HAZ, the austenite grain size of HAZ was measured. The prior austenite grain size in Fusion line (F.L+0.1 mm) was about $350{\mu}m$. The grain size in F.L+1.5 mm was measured to be less than $30{\mu}m$ and this region was identified as being included in FGHAZ(Fine Grain HAZ). It is seen that as the austenite grain size decreases, the size of GBF, FSP (Ferrite Side Plate) become smaller and the impact toughness of HAZ increases. Therefore, the CGHAZ was considered to be area up to 1.3mm away from the fusion line. Results of TEM replica analysis for a welded joint implied that very small size ($0.8\sim1.2{\mu}m$) oxygen inclusions played a role of forming fine acicular ferrite in the weld metal. A large amount of (Ti, Mn, Al)xOy oxygen inclusions dispersed, and oxides density was measured to be 4,600-5,300 (ea/mm2). During the welding thermal cycle, the area near a fusion line was reheated to temperature exceeding $1400^{\circ}C$. However, the nitrides and carbides were not completely dissolved near the fusion line because of rapid heating and cooling rate. Instead, they might grow during the cooling process. TiC precipitates of about 50 ~ 100nm size dispersed near the fusion line.