• 한국광학회지
• /
• 제28권2호
• /
• pp.68-74
• /
• 2017

특정한 파장대역에서 파장변화에 따른 굴절능의 변화를 1차, 2차 미분까지 보정하여 기준파장과 그 인근 파장 대역에서 굴절능의 변화가 매우 적도록 안정화된 광학계를 설계하는 방법에 대하여 연구하고, 이를 적용하여 회절한계의 시준렌즈를 설계하였다. 설계된 광학계는 파장 변화에 대하여 매우 안정하였고, 파장 360~410 nm 대역에서 유효초점거리의 변화가 0.002% 이내로 매우 적었다.

• 대한기계학회논문집A
• /
• 제33권3호
• /
• pp.185-189
• /
• 2009

Focused ion beam system was designed, which includes LMIS, electrostatic lens and high voltage power supply. Control program is updated for high speed image processing. The details of vibration-free vacuum system and other important electrical parts were trouble-shooted for appropriately controlling high acceleration voltages.

• 한국안광학회지
• /
• 제1권2호
• /
• pp.43-47
• /
• 1996

1.0 시력표를 읽을 수 있는 20세 전후의 남녀에 대해 인위적근시를 만들어 운무법과정중에 있는 시력변화단계를 조사하였다. 또 이러한 시력의 변화단계를 굴절력증가에 따른 망막에서 착락원의 크기와 비교하여 수치함수를 만들었다. 시력의 변화단계는 양안에 대해 일정한 균형을 유지하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.30-34
• /
• 2005

This paper describes the design and manufacturing of a focused-ion-beam machining system which can make small features of nano size. We use a SIMION simulator in order to obtain the design data of an ion column. The simulation result shows that the focal length of ion beam decreases as the applied voltage of object lens increases. Finally, we obtained the good images of a mesh of 50 micrometers by using the adjustment of applied voltage, acceleration power, and dimension of each elements.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.81-84
• /
• 1989

EHZP is a kind of holographic optical element, which is generated by the interference of two divergent spherical waves from point sources on the same axis. It has the spherical aberration that the focal power increases as the radial distance r increases. By using this property, optimal design of EHZP was performed for f-$\theta$ lens. As the result of optimization, the f-$\theta$ condition and the field flattening condition were well satisfied when EHZP has f0=0.803f, faR=4.076f, 1=0.406f. It was assumed for calculation of field flattening condition that the incident wave was a plane wave with the diameter of 1mm.

• 수완나부미
• /
• 제7권2호
• /
• pp.57-78
• /
• 2015

Southeast Asia has been a showcase for democratic transitions in the past 30 years. This paper proposes a conceptual lens for studying political shifts in the Southeast Asian region. The argumentative storyline follows two fundamental propositions about democratic transitions. My first proposition is that during democratic transitions, human phenomena arise on nested analytical layers namely the global arena, the state, prodemocracy movements, and individuals. Each layer is conventionally studied by international relations, political science, sociology, and psychology respectively. I propose a multidisciplinary lens that transverses all these analytical layers. A second proposition is that during political shifts, social conditions are historically-situated. Historicity is anchored on stages of democratization, namely the authoritarian regime, toppling the regime, power shift, state building, and nation building. This paper describes a 4 × 5 matrix (analytical layer × historical stage) that may guide a regional agenda on the empirical study of democratic transitions in the Southeast Asian region. It likewise gives examples of research findings in Philippine-based studies that have already begun to provide empirical data about segments of this research matrix.

• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.229-233
• /
• 2015

Currently, the majority of commercial white LEDs are phosphor converted LEDs made of a blue-emitting chip and YAG yellow phosphor dispersed in organic silicone. However, silicone in high-power devices results in long-term performance problems such as reacting with water, color transition, and shrinkage by heat. Additionally, yellow phosphor is not applicable to warm white LEDs that require a low CCT and high CRI. To solve these problems, mixing of green phosphor, red phosphor and glass, which are stable in high temperatures, is common a production method for high-power warm white LEDs. In this study, we fabricated conversion lenses with LUAG green phosphor, SCASN red phosphor and low-softening point glass for high-power warm white LEDs. Conversion lenses can be well controlled through the phosphor content and heat treatment temperature. Therefore, when the green phosphor content was increased, the CRI and luminance efficiency gradually intensified. Moreover, using high heat treatment temperatures, the fabricated conversion lenses had a high CRI and low luminance efficiency. Thus, the fabricated conversion lenses with green and red phosphor below 90 wt% and 10 wt% with a sintering temperature of $500^{\circ}C$ had the best optical properties. The measured values for the CCT, CRI and luminance efficiency were 3200 K, 80, and 85 lm/w.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.96-101
• /
• 2012

An experimental study was conducted to investigate the performance of a concentrating photovoltaic cell (CPV) against temperature. It is know that a high efficiency of a CPV can be achieved only with proper cell temperature as well as high concentration ratio (CR). This study is concerned with appropriate cooling condition for a liquid-convection cooler for the best performance of a specific CPV. A series of experiments was conducted in a range of cell temperatures as a result of varying cooling conditions, while the concentration ratio was 390 and the solar irradiation flux was higher than 900 $W/m^2$ in outdoor environment. The CPV had a planar dimension of 10 by 10 mm. A Fresnel lens was used as a concentrator, of which the dimension was 221 mm(W) ${\times}$ 221 mm(L) ${\times}$ 3 mm(t) and the transmissivity was known to be 0.8. The cooler was attached to the bottom side of the CPV and had a contact area of 21 mm(W) ${\times}$ 26 mm(L), which was identical to the size of the base plate of the CPV. The coolant temperature was controlled by an isothermal bath and the flow rate was controlled and measured by a flowmeter. The experimental results showed that the average of power efficiency of the CPV decreased from 28.6 % to 24.7 % as the cell temperature increased from $36^{\circ}C$ to $97^{\circ}C$. An appropriate cooling method of a CPV might increase the power conversion efficiency by about 4% for the same concentration ratio. Discussion is included from the viewpoint of the combined efficiency in addition to the power efficiency.

• 한국안광학회지
• /
• 제15권3호
• /
• pp.227-234
• /
• 2010

목적: 안경용 초음파세척기를 이용하여 소프트콘택트렌즈의 단백질 침전물 세척 효과와 콘택트렌즈의 변수에 미치는 영향을 조사하였다. 방법: 단백질을 오염시킨 etafilcon A 재질의 소프트콘택트렌즈를 다목적용액에 넣어 안경용 초음파세척기와 콘택트렌즈용 초음파세척기를 사용하여 세척하고 대조군의 콘택트렌즈는 다목적용액으로 세척한 후 콘택트렌즈에 남아있는 단백질을 추출하여 정량하였고 콘택트렌즈의 전체지름, 베이스커브, 중심두께, 도수 및 함수율의 변화를 측정하였으며 주사전자현미경(scanning electron microscope)으로 콘택트렌즈 표면을 관찰하였다. 결과: 단백질을 오염시킨 etafilcon A 재질의 콘택트렌즈는 다목적용액에 의해 6.08%의 세척효과를 보였고, 다목적용액에 콘택트렌즈를 넣고 초음파세척기로 세척한 경우에는 시간에 따라 안경용 초음파세척기에서는 23.73~33.92%, 콘택트렌즈용 초음파세척기에서는 0~12.99%의 세척효과를 보였다. 결론: 안경용 초음파세척기로 세척한 콘택트렌즈에서 변수 및 표면 변화는 관찰되지 않았다. 결론: 안경원에서 사용하는 안경용 초음파세척기는 소프트콘택트렌즈의 단백질 침전물 제거에 효과적이고 변수 변화를 유발하지 않아 안경원에서 진단용 소프트렌즈의 세척에 활용될 수 있을 것으로 사료된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.914-917
• /
• 2002

Fabrication of micro carbon structures and patterns using laser-assisted chemical vapor deposition is studied. Argon ion laser and ethylene were used to grow micro carbon rod through pyrolytic decomposition of the reaction gas. The influence of reaction gas pressure and incident laser power on the diameter and growth rate of the micro carbon rod was experimentally investigated. The diameter of micro carbon rods increases linearly with respect to the laser power but is almost independent of the reaction gas pressure. Growth rate of the rod changes little with gas pressure when the laser power remains below 1W. When the carbon rod was grown at near threshold laser power, a very smooth surface is obtained on the rod. By continuously moving the focusing lens in the direction of growth, a micro carbon rod with a diameter of 28 ${\mu}{\textrm}{m}$ and aspect ratio of 100 was fabricated.