• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1063-1068
• /
• 2008

A lens system of a camera module for mobile phones is comprised of the composition and design of various shapes of lens. To improve responses such as the modular transfer function (MTF), a lens system should always be constructed by considering uncertainty that can be caused by manufacturing and assembly error. In this study, tolerance optimization using the Latin Hypercube Sampling (LHS) technique is performed. In order to reduce the computational burden of the tolerance optimization process and decrease the influence from numerical noise effectively, we use the Progressive Quadratic Response Surface Modeling (PQRSM), which is one of Sequential Approximate Optimization (SAO) techniques. Using this method, we achieved optimal tolerance for each lens and obtained reliability for satisfying user‘s requirements. In addition, through the design process the manufacturing and assembly cost of a lens system was reduced.

• 한국CDE학회논문집
• /
• 제15권5호
• /
• pp.325-332
• /
• 2010

A lens system for mobile phone cameras is comprised of various lenses and designed so as to satisfy design requirements for responses such as a modular transfer function (MTF). However, it is difficult to manufacture and assemble camera modules to maintain the same performance compared with the designed camera modules, because of uncertainty. We should always design a lens system by considering uncertainty that can be caused by errors in the manufacturing and assembly process of mobile phone cameras. The robust optimization offers tools of making robust decisions with the consideration of design parameters, uncontrollable parameters, and the variance of the system. Using an efficient reliability analysis method and an optimization algorithm, we obtained robust optimization results that maximize the mean of MTF and minimize the standard deviation and proposed a new robust design process for a lens system.

• 한국광학회지
• /
• 제20권6호
• /
• pp.319-327
• /
• 2009

본 논문에서는 다음과 같은 관점의 광각 2군 줌 렌즈 설계를 소개한다. 먼저전역최적화의 개념을 기초설계단계에서 도입하고, 이를 통해 현대의 수많은 데이터들을 체계적으로 계통화하고 단순화할 수 있는 설계방안을 제안한다. 구체적인 방안으로 전역설 계를 위해 전역구조함수라는 새로운 개념의 함수를 도입하였고 단순화시켰으며, 나아가 약간의 대수적인 혹은 수치적인 계산을 통해 전역 해 영역을 구하였다. 전역 해 영역은 전역최적화에 대응되는 개념이고 상용화된 설계프로그램들 보다 더 체계적이고 통찰적인 설계방향을 제시한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.555-556
• /
• 2014

In this paper, topology optimization of two-dimensional acoustic lenses is presented by using the phase field method. The objective of the optimization is to maximize the acoustic pressure at a specified domain inside the acoustic domain for a given frequency, and the constraint is imposed on the amount of the material of the acoustic lens. Topology optimization of two-dimensional acoustic lenses are obtained as the steady state of the phase transition described by the Allen-Cahn equation. The Helmholtz equation modeling the wave propagation is solved by using a finite element method. The effectiveness of the proposed method is verified by applying it for several two-dimensional acoustic lens system design problems.

• 한국기계가공학회지
• /
• 제19권6호
• /
• pp.96-101
• /
• 2020

In this paper, we present the results of our research to perform 3D laser scanning functions by adding a focusing lens to a conventional 2D laser scanner. For the optical design, the ray-tracing technique was used along with a total of four lenses as the variable incident focusing lens, the collimating lens, and the F-Theta lens. As design variables, the curvature of the incident focusing lens (Lens #1) was assumed to be us, l mm and sumed mm, and the incident angles were set at 0cidenus, l. In addition, the distance between the focusing lens and the collimating lens was set to vary from 5 mm to 15 mm. When the incident focal length was varied from 5 mm to 15 mm, the exit focal length was calculated to vary from 67.5 mm to 56.8 mm for the lens with R = 100 mm and from 108.5 mm to 99.0 mm for the lens with R = 150 mm. When the incident angle was 0°, the focal aberration was only slightly observable at 10㎛ in both the x- and y-direction. At 7.5° was the focal aberration of approximately 20~50㎛ was measured at 20㎛. To investigate the chromatic aberration of the designed optical device, the distortion of the focus was observed when the 550 nm beam was simulated on lens designed for a 980 nm wavelength.

• 소성∙가공
• /
• 제24권6호
• /
• pp.437-442
• /
• 2015

The development of polishing technology has enabled the production of injection molds with high quality surfaces and shapes. For products such as mobile phones which require high quality performance the use of plastic materials has many constraints such as shrinkage and deflection. The purpose of the current research is to use reverse engineering in order to find and analyze the data of a selected aspherical lens and then creating a process to design an improved lens. Additionally, the improved lenses are subject to molding analysis. In order to solve this problem, the lens construction program, Zemax, was used to analyze and optimize performance. In the case of optimization, the object was to eliminate spherical aberration and to find good MTF data. The result of the optimization data was similar to the MTF data found from a random lens. Specific resin and analysis conditions were selected and CAD modeling was done to enhance the injection molding analysis.

• 한국안광학회지
• /
• 제15권4호
• /
• pp.355-360
• /
• 2010

목적: 국내에서 시판되는 안경렌즈의 성능을 분석하고 최적화 설계로 수차가 보정된 안경렌즈를 설계하였다. 방법: 굴절률 1.6의 재질을 갖는 4개 회사의 ${\pm}$5.00D의 구면 렌즈와 비구면 렌즈의 중심두께, 곡률반경, 비구면 계수를 측정하였다. Mitutoyo사의 ID-F150으로 중심두께를 측정하였고, Automation Robotics사의 FOCOVISION(SR-2)를 이용하여 곡률반경을 측정하였다. 비구면 계수는 Taylor Hobson사의 PGI 1240S로 측정하였다. 렌즈 후면부터 눈의 회선점까지의 거리 27 mm, 동공직경 4 mm, 중심시야 $30^{\circ}$에서 적은 양의 수차를 갖는 안경렌즈를 설계하였다. 측정 렌즈보다 Axial height를 짧게 함으로써 미용 상의 이점을 높였다. 설계에는 ORA사의 Code V를 이용했다. 결과: -5.00D 비구면 렌즈는 구면 렌즈보다 비점수차와 왜곡수차는 약간 크게 나타났으나 Axial height가 짧고 가장자리 두께가 감소하여 미용 상의 장점이 있다. +5.00D 비구면 렌즈는 왜곡수차의 성능이 향상되고 (-)렌즈와 마찬가지로 Axial height와 중심두께의 감소로 미용 상의 장점을 확인하였다. 최적화 과정을 통한 전면 비구면 렌즈는 비점수차와 왜곡수차가 측정 구면 렌즈보다 좋은 성능과 미용 상의 장점을 확인할 수 있다. 결론: 국내에서 시판되는 비구면 렌즈는 수차의 성능보다는 미용 상의 장점을 키우는 Axial height의 감소와 두께의 감소에 주안점을 둔전면 비구면 설계가 이뤄지고 있다. 최적화 설계이론을 통해 측정렌즈보다 향상된 수차성능과 미용 상의 이점을 모두 갖는 전면 비구면 안경렌즈의 설계를 하였다. 후면 비구면 렌즈의 설계를 통해 전면 비구면 렌즈보다 향상된 성능을 얻을 수 있음을 기대할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.307-308
• /
• 2008

• Journal of the Optical Society of Korea
• /
• 제20권2호
• /
• pp.283-290
• /
• 2016

This study presents an 8x four-group inner-focus zoom lens with one-moving group for a compact camera by use of a focus tunable lens (FTL). In the initial design stage, we obtained the powers of lens groups by paraxial design based on thin lens theory, and then set up the zoom system composed of four lens modules. Instead of numerically analytic analysis for the zoom locus, we suggest simple analysis for that using lens modules optimized. After replacing four groups with equivalent thick lens modules, the power of the fourth group, which includes a focus tunable lens, is designed to be changed to fix the image plane at all positions. From this design process, we can realize an 8x four-group zoom system having one moving group by employing a focus tunable lens. The final designed zoom lens has focal lengths of 4 mm to 32 mm and apertures of F/3.5 to F/4.5 at wide and tele positions, respectively.

• 한국CDE학회논문집
• /
• 제16권6호
• /
• pp.397-406
• /
• 2011

Since tolerance allocation in a mobile phone camera manufacturing process greatly affects production cost and reliability of optical performance, a systematic design methodology for allocating optimal tolerances is required. In this study, we proposed the tolerance optimization procedure for determining tolerances that minimize production cost while satisfying the reliability constraints on important optical performance indices. We employed Latin hypercube sampling for evaluating the reliabilities of optical performance and a function-based sequential approximate optimization technique that can reduce computational burden and well handle numerical noise in the tolerance optimization process. Using the suggested tolerance optimization approach, the optimal production cost was decreased by 30.3 % compared to the initial cost while satisfying the two constraints on the reliabilities of optical performance.