• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.472-476
• /
• 2014

The Joint Transform Correlator (JTC) has been the most suitable technique for real time optical pattern recognition and target tracking applications. This paper proposes a new application of the JTC system for an analysis of the blurring effect of the optical images caused by a defocused lens. We present the relation between the correlation peak, optical transfer function (OTF), and the amount of blurring caused by focusing error. Moreover, we show a possibility of calibrating the blurred image by simply measuring the correlation peak.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.383-388
• /
• 2005

Depth recovery in robot vision is an essential problem to infer the three dimensional geometry of scenes from a sequence of the two dimensional images. In the past, many studies have been proposed for the depth estimation such as stereopsis, motion parallax and blurring phenomena. Among cues for depth estimation, depth from lens translation is based on shape from motion by using feature points. This approach is derived from the correspondence of feature points detected in images and performs the depth estimation that uses information on the motion of feature points. The approaches using motion vectors suffer from the occlusion or missing part problem, and the image blur is ignored in the feature point detection. This paper presents a novel approach to the defocus technique based depth from lens translation using sequential SVD factorization. Solving such the problems requires modeling of mutual relationship between the light and optics until reaching the image plane. For this mutuality, we first discuss the optical properties of a camera system, because the image blur varies according to camera parameter settings. The camera system accounts for the camera model integrating a thin lens based camera model to explain the light and optical properties and a perspective projection camera model to explain the depth from lens translation. Then, depth from lens translation is proposed to use the feature points detected in edges of the image blur. The feature points contain the depth information derived from an amount of blur of width. The shape and motion can be estimated from the motion of feature points. This method uses the sequential SVD factorization to represent the orthogonal matrices that are singular value decomposition. Some experiments have been performed with a sequence of real and synthetic images comparing the presented method with the depth from lens translation. Experimental results have demonstrated the validity and shown the applicability of the proposed method to the depth estimation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.408-414
• /
• 2010

When we are collecting traffic information on CCTV images, we have to install the detect zone in the image area during pan-tilt system is on duty. An automation of detect zone with pan-tilt system is not easy because of machine error. So the fisheye lens attached camera or convex mirror camera is needed for getting wide area images. In this situation some troubles are happened, that is a decreased system speed or image distortion. This distortion is caused by occlusion of angled ray as like trembled snapshot in digital camera. In this paper, we propose two methods of de-blurring to overcome distortion, the one is image segmentation by nonlinear diffusion equation and the other is deformation for some segmented area. As the results of doing de-blurring methods, the de-blurring image has 15 decibel increased PSNR and the detection rate of collecting traffic information is more than 5% increasing than in distorted images.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.9
• /
• pp.447-453
• /
• 2001

In this paper, a new auto-focusing algorithm for digital cameras is proposed. One of the primary concerns of digital image processing is to increase image quality, and the most important factor for degrading the images is the blurring effect due to inexact focusing. The blurring effect occurs when the focusing lens is located on an unsuitable position. Therefore, focusing on an object should be proceeded before acquiring images. The proposed auto-focusing algorithm is MMDT(min-max difference threshold), and the performance of the proposed algorithm is evaluated by the use of the focus curve. It is shown that the proposed algorithm is superior to other previous auto-focusing algorithms in both the focus shape and computation time aspects. Especially, the improvement of the focus curve shape in both monotonousness and slope indicates that focusing can be done rapidly in comparison with other previous proposed algorithms.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.5
• /
• pp.813-827
• /
• 2017

Surveillance cameras installed in tunnels capture the various video frames effected by dynamic and variable factors. In addition, localizing and managing the cameras in tunnel is not affordable, and quality of capturing frame is effected by time. In this paper, we introduce a new method to detect and track the vehicles in tunnel by using surveillance cameras installed in a tunnel. It is difficult to detect the video frames directly from surveillance cameras due to the motion blur effect and blurring effect on lens by dirt. In order to overcome this difficulties, two new methods such as Differential Frame/Non-Maxima Suppression (DFNMS) and Haar Cascade Detector to track cars are proposed and investigated for their feasibilities. In the study, it was shown that high precision and recall values could be achieved by the two methods, which then be capable of providing practical data and key information to an automatic accident detection system in tunnels.

• Korean Journal of Optics and Photonics
• /
• v.25 no.1
• /
• pp.21-28
• /
• 2014

In this paper a Super Multi-view display method using a pinhole array with full parallax was proposed. The proposed method was simulated and its parameters analyzed. Also, the distribution and irradiance of light through each pinhole on the retina receiver, according to the change of crystalline lens focal length, were found by simulation. As a result, an image free of blurring was obtained while the crystalline lens focused on the depth plane of the three-dimensional image created by the imaging lens.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.159-165
• /
• 2012

The accurate focusing position should be determined for accurate measurements In VMS. Camera lens focusing is an important problem in computer vision and video measuring systems (VMS) that use CCD cameras and high precision XYZ stages. Camera focusing is a very important step in high precision measurement systems that use computer vision technique. The auto focusing process consists of two steps, the focus value measurement step and the exact focusing position determination step. It is suitable for eliminating high frequency noises with lower processing time and without blurring. An automatic focusing technique is applied to measure a crater with a one-dimensional search algorithm for finding the best focus. Throughout this paper, the suggested algorithm for the Auto focusing was combined with the learning. As a result, it is expected that such a combination would be expanded into the system of recognizing voices in a noisy environment.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.569-571
• /
• 1998

In this paper, we propose a method of restoring blurred images by an edge-sensitive adaptive filter. The direction of the edge is estimated using the properties of 2-D block FFT. Reduction of blurring due to the added noise during image transfer and the focus of lens caused by shooting a fast moving object is very important. To remove this phenomenon effectively, we can use the edge information obtained by processing the blurred images. The proposed algorithm estimates both the existence and the direction of the edge. On the basis of the acquired edge direction information, we choose the appropriate edge-sensitive adaptive filter, which enables us to get better images than images obtained by methods not considering the direction of the edge. The performance of the proposed algorithm is shown in the simulation result.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.147-153
• /
• 2014

In this paper, we present a non-dyadic lens distortion correction model and image restoration method based on local self-similarity to remove jagging and blurring artifacts in the peripheral region of the geometrically corrected image. The proposed method can be applied in various application areas including vehicle real-view cameras, visual surveillance systems, and medical imaging systems.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.4
• /
• pp.361-372
• /
• 2010

Optical image stabilization is a technique to compensate the image blurring caused by some vibrations of camera at the exposure time. Pitching and yawing of camera are sensitive to the image quality so they are usually compensated by optical image stabilization. Corresponding pitching and yawing of a camera, a lens or the image sensor is translated in two-axis direction and then the optical path of camera is adjusted. In this paper, two-axis OIS actuator for mobile camera module is suggested and designed. The actuator is a voice-coil actuator that uses the electromagnetic force of voice-coil to make compensation motions. And ball bearing is used to reduce friction force. Magnetic attractive force between magnets and yokes acts as a preload and magnet springs. Prototype actuator is fabricated to measure the friction force and to verify the feasibility of the OIS actuator with ball bearing. At last, the actuator is improved in consideration of driving force and friction force. Design of experiments is used for designing the actuator.