• Journal of The Korean Society of Grassland and Forage Science
• /
• 제12권3호
• /
• pp.178-184
• /
• 1992

Five varieties of silage corn were cultivated to compare the growth characteristics and productivity. Corn varieties were Pioneer 3144(P 3144), 3160(P 3160), 3282(P 3282), 3352(P 3352) and Suweon 19 (S 19). The corns were seeded on May 2 and harvested on August 15, and measured the plant height, leaf length, leaf width, stem diameter, and yields of fresh and dry matter. The results obtained were as follows: 1. Plant height of P 3352 and P 3144 grown about 280cm throughout the experimental period was the tallest(P<.Ol), and those of P 3160, P 3282 and Suweon 19 ranged from 246.3 to 256.0 cm. 2. Leaf length is the longest in P 3352 and the shortest in P 3282(97.63cm vs 84.17cm), and there was significant(P<.Ol) difference between corn varieties. 3. Stem diameter was the longest in P 3144 and the shortest(P<.Ol) in P 3352(3.28cm vs 2.66cm). 4. P 3144, P 3282 and P 3352 had the greatest(P<.Ol) fresh matter yields per 10a in leaf, stem, and ear and whole plant, respectively. 5. Dry matter yield of P 3282 was the greatest(P<.Ol) in stem(1,080.6 kg/lOa) and leaf(304.5 kg/lOa), and that of P 3352 was the greatest in ear(864.1 kg/lOa) and whole plant yield(2,021 kg/lOa). 6. Ratios of respective part of corn to total dry matter were ranged from 12.7 to 17.8 76 for leaf, 44.5 to 66.9% for stem and husks, and 16.9 to 42.8 % for ear, and the highest in P 3160, P 3160 and P 3352, respectively. Consequently, P 3352, P 3144 and P 3282 shown high productivity in dry matter yield could be recommended as a reliable corn varieties for silage.

• Steel and Composite Structures
• /
• 제37권5호
• /
• pp.621-632
• /
• 2020

This research deals with the study of vibrational behavior of armchair and zigzag single-walled carbon nanotubes invoking extended Love shell theory. The effects of different physical and material parameters on the fundamental frequencies are investigated. By using volume fraction for power law index, the fundamental natural frequency spectra for two forms of single-walled carbon nanotubes are calculated. The influence of frequencies against length-to-diameter ratios with varying power law index are investigated in detail for these tubes. To discretize the governing equation in eigen-value form, wave propagation approach is developed. Complex exponential functions have been used and the axial model depends on boundary condition that has been described at the edges of carbon nanotubes to calculate the axial modal dependence. Computer software MATLAB is utilized for the frequencies of single-walled carbon nanotubes and current results shows a good stability with comparison of other studies.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제30권3호
• /
• pp.451-458
• /
• 1997

The oxygen transfer coefficient was not significantly affected by either flow pattern, initial bubble size or the wastes present in the water studied. Surface active substances in the water did however influence the transition from bubble to slug flow. Airlift with length to diameter ratios less than 50 suffered from considerable losses in efficiency. When properly designed, airlift pumping efficiencies were comparable to those of conventional centrifugal pumps and the oxygen transfer efficiency were as high as or higher than those of diffused aeration systems.

• Computers and Concrete
• /
• 제28권6호
• /
• pp.559-566
• /
• 2021

In this paper, frequency analysis has been done for functionally graded cylindrical shell with ring supports using Sander's shell theory. The vibrations of rotating cylindrical shells are analyzed for different physical factors. The fundamental natural frequency is investigated for different parameters such as: ratios of length-to-diameter ring supports. By increasing different value of height-to-radius ratio, the resulting backward and forward frequencies increase and frequencies decrease on increasing height-to-radius ratio. The frequencies for different position of ring supports are obtained in the form of bell shaped. The backward frequencies increases and forward frequencies decrease on increasing the rotating speed. The results generated furnish the evidence regarding applicability of present shell model and also verified by earlier published literature.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제41권1호
• /
• pp.123-130
• /
• 1996

Experiments were conducted to effect of seeding rates and growth regulator (KIM-112) application on lodging resistance and yield in direct seeding on flooded paddy surface. The number of seedlings per $m^2$ were ranged from 61 to 143, and seedling ratios were from 71.7 to 76.1％. The culm length was increased with the higher seeding rates. The culm length was significantly shortened by KIM-112 application, and the shortened effect of internodes were various with application times. The leaf angles with the culm and top leaves were errected and position of light reception by KIM-112 application, also the weight of culm base was increased. The bending moment at breaking of culm and culm diameter were decreased according to the higher seeding rates. The number of panicles per $m^2$ were increased according to the higher seeding rates. The ripened grain rate and 1, 000 grains weight became higher than the untreated control.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제60권6호
• /
• pp.1134-1139
• /
• 2011

When the aspect ratio of a magnet varies, the magnetic field in the magnet also varies. The critical current of a tape-shaped HTS wire varies with the direction and magnitude of applied magnetic field. Consequently when the aspect ration of a HTS magnet varies, the critical current of a HTS magnet varies. This paper shows the relation between the aspect ratio of a magnet and the energy and inductance of a HTS magnet. The critical current is also shown at various aspect ratio of the magnet. The length of the HTS wire, inner diameter of the magnet, and number of pancake are chosen to be variables which varies the shape of the magnet. For a HTS magnet consisting of pancake windings, calculation results show the number of pancake windings are the prime factor which varied the energy and inductance of the magnet. The inner diameter of the magnet varies the energy and inductance of the magnet a little.

• The Journal of the Korea Contents Association
• /
• 제12권7호
• /
• pp.247-254
• /
• 2012

This study presents the assessment results of coil length characteristics according to the volume of cerebral artery among the inpatients that received angiography and coil embolization following intracranial aneurysm from March, 2010 to September 2011. The volume rendering method was applied to the patients that received embolization to their cerebral arteries to obtain volume measurements. After coil embolization, the volume ratios were calculated with the volumes and lengths of coils. The embolic volume ratios were $43.11{\pm}3.11%$, $36.07{\pm}2.03%$, 40.91%, and 38.25% when the aneurysm sizes were 6mm or less, 6~10mm, 10~15mm and 20mm or more, respectively, being similar to the recommended volume ratios. Regardless of the types of aneurysm, the coil length according to volume was 0.65cm per $1mm^3$ of 20~$100mm^3$ when one type of 0.25mm diameter coil was used. They were 0.62cm per $1mm^3$ of 20~$150mm^3$ when one type of coil was used in the aneurysm volume of the saccular type and 0.60cm per $1mm^3$ of 20~$90mm^3$ when one type of coil was used in the aneurysm volume of the multi-lobulated type.

• Structural Engineering and Mechanics
• /
• 제76권1호
• /
• pp.129-139
• /
• 2020

In this piece of work, carbon nanotubes motion equations are framed by Kelvin's method. Employment of the Kelvin's method procedure gives birth to the tube frequency equation. It is also exhibited that the effect of frequencies is investigated by varying the different index of polynomial function. By using volume fraction for power law index, the fundamental natural frequency spectra for two forms of single-walled carbon nanotubes are calculated. The influence of frequencies against length-to-diameter ratios with varying power law index are investigated in detail for these tubes. Throughout the computation, it is observed that the frequency behavior for the boundary conditions follow as; clamped-clamped, simply supported-simply supported and these frequency curves are higher than that of clamped-free curves. Computer software MATLAB is utilized for the frequencies of single-walled carbon nanotubes.

• Journal of Energy Engineering
• /
• 제12권2호
• /
• pp.84-92
• /
• 2003

A one-dimensional thermal-hydraulic analysis computer program is developed for thermal sizing of a copper bonded steam generator. It is assumed that the conduction heat transfer of copper region between the hot side and the cold side tube is one-dimensional and its thermal resistance is derived as a function of a tube pitch. The flow regions of the water/steam side are divided into four regions: subcooled, saturated, film boiling, and super-heated. The number of tube selected ranges from 250 to 3500 and the pitch to tube diameter (P/D) ratios are 1.4, 1.6 and 1.8 for the parametric study calculation. The calculation results showed that when the number of tube was 2500, the length of the heating tube was about 12 m and the outside diameter of the steam generator was about 3 m. If the P/D ratio increases, the thermal resistance of copper component also increases, however the length of the heating tube is not so much increased.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.122-128
• /
• 2003

Rock bolts are widely used as a supplementary roof support system in hard-rock mining since a long time. Since the performance of fully grouted passive bolts depends on bond strength, in the present investigation extensive laboratory pull-out as well as push-out tests were conducted varying the bolt diameter, length and cement-water mixing ratios of grout. The load-displacement curves were developed and were verified with the numerical results obtained from finite element analysis using ALGOR software. Numerical models were validated for push-out tests and a detailed analysis was carried out to know the displacement, stress, strain distribution along the bolt.