• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1186-1188
• /
• 1999

When we perform the test related to the power distribution system such as artificial fault test, protective coordination test, distribution automation test in short length test line, Lumped Constant Circuit, a kind of variable impedance, should be attached to the test line in order to make it equivalent to a real line in length electrically. In this paper we designed the positive sequence and zero sequence Lumped Constant Circuit with optimized inductor and resister for the modification of long, 16km, distribution line, when they are attached to the short, 4km, distribution test line.

• Nuclear Engineering and Technology
• /
• 제30권6호
• /
• pp.485-495
• /
• 1998

Migration characteristics of tracers in a rock fracture in a case of line-source and line-collection was studied. The fracture plane was discretized into a square mesh to which variable apertures were assigned. The spatially varying apertures of a fracture were generated using a geostatistical method, based on a given aperture probability density distribution and a specified spatial correlation length. The flow potential and pressure at each node were computed. Calculations showed that fluid flow occurs predominantly through a few preferred paths. Hence, the large range of apertures in the fracture gives rise to flow channeling. The solute transport was calculated using a particle tracking method. The migration plumes of tracer between injection line and withdrawal line are displayed in contour plots. The elution curves are shown to be controlled by the aperture density distribution and to be insensitive to statistical realization and spatial correlation length.

• 사상체질의학회지
• /
• 제14권1호
• /
• pp.51-66
• /
• 2002

The main purpose of this study is to differentiate Sasang Constitutions of men and women by measuring 5 parts of the body. By the definitions about Four Chos(四焦) in ${\ulcorner}$The Discourse on Viscera and Bowels(臟腑論)${\lrcorner}$, the body is divided into four parts and sets up the five borderlines. They are Top-line, Bosom-line, Stomach-line, Navel-line and Bottom-line. Top-line(第一線) is the horizontal distance between Rt. & Lt. Coracoid processes passing through the acupuncture point CV-22(天突穴) or the horizontal distance between Rt. & Lt. beginning points of Axillary lines. Bosom-line(第二線) is the horizontal distance passing through Rt.& Lt. Nipples. Stomach-line(第三線) is the horizontal distance passing through Rt.& Lt. acupuncture point ST-19(不容穴). Navel-line(第四線) is the horizontal distance passing through the navel(CV-8; 神闕穴) and the acupuncture point ST-25(天樞穴). Bottom-line(第五線) is the horizontal distance between Rt. & Lt. Anterior Superior Iliac Spine(ASIS). The measured numerical values of Five Lines are the most important factors to classify the Four Constitutions(Taeyangin, Taeumin, Soyangin, Soeumin). Among the five lines, Stomach-line(Middle-line) is the base line to decide Yin and Yang. As a result, I could differentiate the four Constitutions as follows. 1. Taeyangin's Top-line is more than 36cm long. Top-line is the longest. Bottom-line is the shortest. The length-difference between Top-line and Bottom-line is more or less 10cm long. 2. In case of Taeumin, Navel-line is the longest. The numerical values of Middle and Bottom lines are almost the same or Bottom-line is shorter than Middle-line by 1 or 2 cm long. In some special case, the five lines are all the same and the body just looks like a log. 3. In case of Soyangin, just like Taeyangin, Top-line is the longest. Bottom-line is the shortest. The length of Top-line is ranged between 30cm to 35cm long. From Top-line to Bottom-line, the length gradually diminishes each by 2cm: for example, 34-32-30-28-26. 4. In case of Soeumin, the longest one is Bottom-line. Specially, Navel-line is shorter than Middle-line. Bottom-line is longer than the Middle.

• 대한가정학회지
• /
• 제41권11호
• /
• pp.1-9
• /
• 2003

The somatotype classification of this study was to manufacture well-fitted clothes for middle-aged women. The somatotype classification of the upper body of lateral view was based on previous studies, and 4 postures, straight posture, leaning back posture, bent forward posture, and swayback posture were selected for this study. The front of leaning back posture was longer and wider than that of straight posture, and its front neck depth was deeper. Its front interscye breadth was wider and back interscye breadth was narrower. S.N.P. B.P. front waistline length, waist front length, front diagonal length, chest shedder length, front waistline shoulder line length were longer, and S.N.P. scapular back waistline length, back length, back shoulder length, back diagonal length, shoulder line back waistline length were shorter. On the contrary, the front of bent forward posture was shorter and narrower than that of straight posture, and its back neck depth was deeper. The properties of swayback posture were similar to those of bent forward posture. Its front was shorter and narrower, but the results of front neck depth and back neck depth were like those of straight posture.

• 한국생활과학회지
• /
• 제18권3호
• /
• pp.729-740
• /
• 2009

This study is to research on the rate of expansion or contraction according to movement of the lower body of the man their twenties using Rapid Form software. And aim of this study is to get information of ease allowance in developing slacks pattern using 3D body surface scan data through comparison with existing slacks patterns. Considering on the contraction and expansion according to movement, it need to set the more ease allowance in hip circumference than waist circumference, and the more ease allowance in back hip width than front hip width in slacks. In crotch length, the length of front crotch is revealed contraction but the length of back crotch is revealed expansion. It is desirable lowering front waist line and raising back waist line to possess ease allowance in back crotch area. The length of side seam is revealed a little expansion but the length of inseam is showed a great expansion. To develop slacks pattern of scientific approach using 3D body surface scan data, it need to analysis the rate of expansion and contraction of the lower body based on the movement, shear deformation, slip in fabrics and skin, or in fabrics and fabrics, and slip down from waist line.

• 한국음향학회지
• /
• 제22권3호
• /
• pp.202-207
• /
• 2003

초음파트랜스듀서는 초점거리의 제어를 위해서 각 진동요소에 전기회로를 이용한 위상가중치를 부가하는 방식을 사용하고 있다. 그러나 이러한 방법은 진동요소가 증가함에 따라 전기회로가 더욱 복잡해진다. 본 연구에서는 바이몰프형 액츄에이터를 신호의 송수신을 하는PVDF의 뒷부분에 삽입하여 선집속형 트랜스듀서를 제작하였다. 이 트랜스듀서를 사용하여 액츄에이터에 인가되는 전압 변화에 의해 기계적으로 초점거리를 제어할 수 있었다. 이 방법을 사용한 결과 수중에서 선집속형 초음파 트랜스듀서의 초점거리를 곡률 반경의 10%범위까지 제어 가능함을 확인하였다.

• 한국의류학회지
• /
• 제22권2호
• /
• pp.203-214
• /
• 1998

The purpose of this study is to classify the upper body of women into several kinds of somatotypes, using the method of Surgical Tape and making their shells. The subjects are 53 females 30 to 39 years-old. Fifty-three anthropometric data are measured per shell of bodysurface; six somatotype factors are obtained through principal component analysis and orthogonal rotation by the method of Varimax, Somatotype of women's upper body is achieved by cluster analysis, using the standardized factor score as an independent variable and the FASTCLUS of SAS by Kmeans. The results are as follows: 1. The number of the factors which explain the somatotype is six and those factors comprise 76.12 percent of total variance. Factor 1: related to the size of shape in the front of upper body Factor S: related to the size of shape in the back of upper body Factor 3: related to the type of the upper chest over the chest circumference line Factor 4: related to the length of·the upper body Factor 5: related to the part of the neck Factor 6: related to the type of the lower chest under the chest circumference line 2. Cluster analysis results in classification of upper body into five clusters. Cluster L: the length is the largest and the circumference is small. The part of waist is the largest and widest among surface areas. Cluster 2: Slender body line from chest to waist is characteristic. The length is longer. The part of upper and lower chest is larger among surface areas. Cluster S: the circumference is the smallest and armhole is small. The length and surface area are small. Cluster 4: the circumference and armhole is the largest. The length is the smallest. Cluster 5: the circumference is average and the length is a little long. The body line(silhouette) from chest to waist is curved slightly.

• 복식문화연구
• /
• 제19권3호
• /
• pp.597-611
• /
• 2011

The purpose of this study is to propose a design method for one-piece dress patterns with high body fitness through an appearance evaluation of one-piece dress patterns with the application of the 3D Virtual Clothing System known as i-designer. Measures consisted of an optical illusion effect in visual imagery and mutual influence according to a change in the length and princess line, in a silhouette of a one-piece dress. The data was assessed by a t-test and a multi-way ANOVA and factor analysis using SPSS 17.0. The results were as follows; The design of the study pattern was done by modifying the ease of the bust circumference, ease of the abdominal circumference, ease of the hip circumference, the position of the side seam line, and the appearance of horizontality in the hem line, which received a low evaluation in appearance evaluations of a one-piece dress pattern. As a result of analyzing the visual image according to a change in the length and princess line, in the form of a silhouette of a one-piece dress, four factors were selected; the whole-body optical illusion factor, the upper-body optical illusion factor, the bust optical illusion factor, and the lower-body optical illusion factor. As a result of analyzing the effect of the interaction in the visual image according to the design variables, the influence of the main effect was found to be great in each factor. In the upper-body optical illusion factor, a significant difference was not noted in the two-way interaction between the length and the princess line. However, the influence on three-way interaction among the length, princess line, and silhouette was significant.

• 한국정보통신학회논문지
• /
• 제23권10호
• /
• pp.1282-1289
• /
• 2019

임피던스 변환회로의 신호 전달특성(S21)을 측정하기 위해서는 두 개의 임피던스 변환회로를 대칭 연결하여야 한다. 하지만 두 개의 임피던스 변환회로를 대칭 연결한 회로의 신호 전달특성은 중간 연결 선로의 길이에 의해 영향을 받는다. 본 논문에서는 임피던스 변화회로의 정확한 신호 전달특성을 얻기 위한 중간 연결 선로의 길이를 수식으로 유도하였다. 수식을 이용하여 계산하면 4:1(50-Ω:12.5-Ω) 임피던스 변환회로의 정확한 신호 전달특성을 얻기 위한 중간 연결 선로의 전기적 길이는 약 45°이다. 계산된 연결 선로의 길이를 적용하여 1GHz에서 λ/4-마이크로스트립 임피던스 변환회로를 제작하여 신호 전달특성을 측정하였다. 제작된 대칭 연결된 임피던스 변환회로의 신호 반사 특성(S11)은 0.980GHz에서 -40.64dB, 신호 전달 특성(S21)은 -0.154dB였다. 이는 제작 회로에 대해 이론적으로 살펴본 중심 주파수의 987MHz 변화, 마이크로스트립 선로의 신호 손실 -0.15dB 값과 거의 동일한 값이다.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.274-279
• /
• 2014

This paper investigates the line dynamic forces connecting tugs and a floater, where the planar motion of the floater is due to the weather criteria during the position keeping of the offshore structure by tugs. The analysis situation consists of the position keeping states for the seabed mooring line connection work of the offshore structure at the offshore site. Specifically, the decision about the tug power capacity for the position keeping is essential and depends on the weather criteria, line characteristics, length of line, etc. The planar motion of the structure is constrained by the interference of the installation vessel's operational range, behavior of the underwater fairlead, and other surrounding structures. In this paper, the tug line forces and planar motion of an offshore structure are summarized dependent on the tug line length and line material characteristics in the states fora given floater draft and weather criteria. The tug line dynamic forces and planar motion evaluated here will be used to determine the proper tug power and clearance of an offshore structure.