• 접착 및 계면
• /
• 제19권2호
• /
• pp.60-67
• /
• 2018

본 연구에서는 친환경 천연섬유인 케나프의 표면을 Chemlok 402를 함유하고 있는 접착용액으로 전처리하였을 경우, 케나프/천연고무 복합재료의 경화거동, 경도, 인장특성 그리고 마모특성에 미치는 섬유 표면처리 유 무, 섬유함량 및 섬유길이의 영향을 조사하였다. 복합재료를 구성하는 케나프섬유 함량은 평균 케나프섬유의 길이가 약 2 mm로 일정한 상태에서 각각 0, 5, 10, 15, 20 phr로 달리하였다. 또한 섬유함량이 5 phr로 고정된 상태에서 평균 섬유길이는 각각 2 mm, 35 mm, 70 mm로 달리하여 각 특성을 비교하였다. 천연고무 복합재료의 경화거동을 나타내는 Tmax 값과 tc90 값, Shore A 경도, 인장탄성률 그리고 마모저항성은 케나프섬유 함량과 길이에 크게 의존하였다. 이러한 특성들은 케나프섬유의 표면을 접착용액으로 전처리한 경우가 처리하지 않은 경우보다 더 우수한 특성을 나타냈다. 이러한 현상은 전처리된 케나프섬유와 고무매트릭스 사이의 계면접착 상태가 개선되었기 때문이다. 본 연구결과는 천연섬유강화 복합재료의 물성을 향상시키기 위해 접착용액의 적절한 사용이 가능하다는 것을 제시하여 준다.

• 한국의류학회지
• /
• 제30권7호
• /
• pp.1025-1033
• /
• 2006

Kenaf bast can be obtained by decortication of Kenaf stem. Kenaf fibers are much more rough than cotton fiber because they include impurities as pectin, lignin and hemicellulose besides cellulose. The purpose of this research is to investigate the distribution of kenaf fiber length and diameter during the processes of removing impurities. To remove pectin, kenaf bast was retted chemically. A half of the retted kenaf fiber bundle were scoured and bleached. The other half one were treated with $NaClO_2$ solution to remove lignin, and were treated with sodium hydroxide solution to remove hemicellulose. Four kinds of specimens that were obtained for investigating physical characteristics. Length and diameter of 100 fibers on each specimen was measured. The tensile strength of 100 fiber bundles were measured. And also the color values of them were measured with spectrocolorimeter. The length of retted kenaf fiber was 16.97cm. Then it decreased to 11.43cm after bleaching. Kenaf fiber bundles could be finer by chemical processes that remove non-cellulosic materials. The thickness of retted fiber was $132{\mu}m$. And after undergoing the chemical processes to remove non-cellulosic materials, the thickness of kenaf fiber became finer as $73{\mu}m$. Tensile strength of the retted kenaf fiber bundles was 11.37Mpa. The retted kenaf fiber lost their strength as 22.6% by bleaching and as 18.3% by treatment for removing lignin. The retted kenaf fiber showed low whiteness as 56.48 of L*value. After bleaching, the kenaf fibers have creamy white color and their whiteness got 90.02 of L*value. After the treatment for removing hemicellulose, the kenaf fibers also have creamy white color and their whiteness got L* value of 79.02.

• Fibers and Polymers
• /
• 제7권1호
• /
• pp.26-29
• /
• 2006

Samples of kenaf (Hibiscus cannabinus) grown in Malaysia were examined to determine the kraft pulp and paper-making properties of their bast (or bark) fibers. Using kraft pulping process showed that bast fibers were relatively easy to cook resulting good pulp yields in the range of 45-51 %. The bast pulp produced sheets with great density, tear index and dry zero-span breaking length. Kenaf bast fiber is considered promising for production of high-grade printing, writing and specialty papers.

• 한국의류학회지
• /
• 제34권11호
• /
• pp.1889-1899
• /
• 2010

This study examines the preparation and characterization of Kenaf/Starch bio-composites used as filler and a matrix. Kenaf was cultivated in Chung-ju in Korea, and the Kenaf/Starch bio-composites were prepared under various conditions of kenaf fiber length (1-5 centimeters); the content of Kenaf fiber was 10%, 20%, 30%, and 40%, and the number of composite layers (one-four). Depending on the formation conditions of Kenaf/Starch composites, the physical properties such as tensile strength, elongation, and the young modulus of the Kenaf/Starch composites were measured. In addition, we measured the SEM cross-section images in order to investigate the interfacial adhesion properties of fractured surfaces. As a result, the tensile strength and elongation of the Kenaf/Starch composites were highest in the molding conditions of a hot press at $120^{\circ}C$, 3000PSI of pressure, and for 30 minute periods. The result of measuring the physical properties of the composites manufactured by varying the content of Kenaf fiber when the content of Kenaf fiber was 30% as well the physical properties of the Kenaf/Starch composite was found desirable. It was found that the physical properties improved with more overlapped layers in the composites manufactured by varying the number of overlapped layers. Through the measuring of the SEM cross-section images, we found that the interfacial adhesion state between the filler and matrix of Kenaf/Starch composite greatly affects the physical properties.

• 한국의류학회지
• /
• 제30권11호
• /
• pp.1581-1588
• /
• 2006

The effects of removal of lignin or hemicellulose on the cottonizing and pulping characteristics of kenaf fiber were studied by comparing the conditions of non-cellulosic material contents, fiber lengths and dyeability. And the effects of lignin or hemicellulose on dyeability of the kenaf fiber using CI Direct Green 26 and CI Direct Red 81 were investigated. The results were as follows. The lignin contents decreased and the kenaf fiber became shorter and finer as the reaction time with sodium chlorite increased. The hemicellulose could be removed by treating sodium hydroxide solution to the fiber from which the lignin partly removed. The 80% of hemicellulose could be removed by 5% of sodium hydroxide solution in 5 minutes. But if lignin were not removed at all, hemicellulose could not be removed. The fiber lengths proper for apparel were obtained after treating sodium chlorite for 10-20 minutes and those for pulping were obtained after treating sodium chlorite for 40 minutes. The kenaf fibers from which lignin and hemicellulose partly removed were dyed with CI Direct Green 26 and CI Direct Red 81. Their dyeability increased as the removal rates of lignin increased. The ${\Delta}E$ values of kenaf fiber dyed with CI Direct Green 26 were lower than CI Direct Red 81.

• 공업화학
• /
• 제27권3호
• /
• pp.270-275
• /
• 2016

길이가 다른 두 종류의 케나프 섬유(kenaf fiber, KF)가 적용된 고밀도폴리에틸렌(high density polyethylene, HDPE)/KF 복합체를 이축압출기를 이용하여 제조하였다. HDPE/KF 복합체의 발포를 위해 열팽창성 마이크로캡슐(thermal expandable microcapsule, EMC)이 이용되었다. 0.3과 3 mm 길이의 KF가 사용되었고, KF와 EMC의 함량은 각각 20 wt%와 5 wt%로 고정하였다. 화학처리된 KF의 FT-IR 결과 1700과 $1300cm^{-1}$ 근처에서의 피크 감소를 보여주는데, 이는 KF 성분 중 리그닌과 헤미셀룰로오스가 감소되기 때문으로 유추할 수 있다. 발포비중, 인장특성을 평가할 때 3 mm 섬유를 사용한 복합체의 물성이 양호하게 나타났지만, 섬유의 길이가 길수록 열분해에 의한 외관 불량 등의 문제가 발생할 수 있어 산업적 응용에 따라 적절한 섬유 길이의 선택이 요구된다. 화학 처리한 0.3 mm KF가 사용된 복합체의 인장강도가 소폭 증가하였다.

• 한국의류학회지
• /
• 제31권8호
• /
• pp.1286-1296
• /
• 2007

Hanji, the korean traditional papers were mostly made from mulberry paper. But the production and demand of hanji have decreased rapidly because mulberry paper yields were insufficient and handworked hanji procedures were complicated. Recently, the researches on hanji were carried out to improve the properties of hanji. Kenaf fibers have been interested as a substitute resource of mulberry paper for hanji production. In this research, Kenai pulps were manufactured with removal methods of lignin or hemicellulose from kenaf fibers and paper mulberry pulps with traditional alkali methods. Kenaf papers, paper mulberry, and kenaf/paper mulberry mixed papers were manufactured with their pulps. The crystallinity, fiber length, color of the pulps and tensile strength, tear strength, water absorption of the papers were investigated. The results were as follow: The removal rates of lignin of chemical retted kenaf fibers with sodium chlorite reaction for 40 minutes were 70% and were higher than 40% of double retted fibers. Paper mulberry pulps has less lignin and hemicellulose than kenaf differently. The crystallinity of paper mulberry pulps were very low with 60%, but kenaf pulps were 90%. The chemical retted CR-40-1 pulps were similar with paper mulberry pulps on fiber length & fibrilation of fibers. Tensile strength of paper mulberry were higher than kenaf papers because of fibrilation of paper mulberry, but tear strength were lower. Tensile strength and tear strength were improved on kenaf/paper mulberry 30/70 mixed papers.

• 한국자원식물학회지
• /
• 제2권2호
• /
• pp.291-297
• /
• 1989

It was indicated that natural fiber crops Ln Korea have been major crops, such as cotton, flax, ramie and Kenaf. The major varieties andagronomic characterics are summarized as follows. Cotton variety, Mokpo 6 is long fiber length and, is high lint yield, flax variety, Wiera is hiTh amount of dry stem and grains weiTht. On the other hand, kenaf variety, Suweon 2 is high dry fiber weight and fiher ratio.

• Journal of the Korean Wood Science and Technology
• /
• 제36권4호
• /
• pp.11-18
• /
• 2008

국내 간척지에서 생장한 양마(kenaf)의 생장특성을 이해하기 위하여 전보(이 등, 2007)와 동일한 시료를 이용하여 생장기간과 높이에 따른 조직 및 구성 세포의 비율, 섬유 길이 및 도관 직경을 광학현미경을 이용하여 측정하였다. 또한, 세포벽 중의 셀룰로오스 상대결정화도와 결정 폭을 X선회절법으로 측정하였다. 양마의 구성 비율은 사부 10~15%, 목부 66~82%, 수 7~19% 정도였는데, 줄기 높이와 생장기간에 따른 차이를 보였다. 사부내에서는 사부방사조직이 약 50%, 인피섬유가 약 20%, 피층, 사관 등 기타 요소가 30% 정도인 것으로 나타났다. 반면, 목부의 구성 비율은 목부섬유가 약 75%, 방사조직이 약 15%, 도관이 약 10%를 차지하였다. 양마목부의 세포벽 비율은 기부 30.92%, 최상부 46.40%로 최상부가 기부보다 높게 나타났다. 인피섬유의 길이는 줄기 기부에서 약 2.8 mm이고 높이가 증가할수록 감소되며 생장기간이 길어지면 다소 증가하는 경향을 보인 반면, 목부섬유 길이는 생장기간과 줄기 높이에 관계없이 약 0.9 mm의 안정된 값을 나타내었다. 도관의 방사 및 접선방향 직경은 생장기간이 길어질수록 증가하였고, 줄기 높이가 높아질수록 감소하였다. 상대결정화도는 사부에서 70~79%, 목부에서 50~56%로 사부가 높았고, 줄기 기부가 상부보다 다소 높게 나타났다. 셀룰로오스 결정 폭은 사부와 목부에서 약 3 nm로 거의 차이가 없었다. 결론적으로 각 조직과 조직 구성 요소의 비율 및 세포의 치수는 양마의 줄기 높이와 생장기간에 따라 차이를 보였지만 셀룰로오스의 결정구조는 차이가 없는 것으로 확인되었다.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.70-76
• /
• 1999

This study was to measure the potential of nonwoody fibrous material, kenaf. Whole stalk of kenaf, Hibiscus cannabinus was separated by two parts of bast and core portion, and cooked separately by alkaline method. Morphological characteristic was evaluated using confocal laser scanning microscope (CLSM) and fiber quality analyzer(FQA). The strength properties of handsheets, made by different mixing ration between kenaf base and core fibers, were measured. Cross-sectional area of bast fibers was smaller than that of core fibers, but the bast fibers had a thick cell wall and narrow lumen area. Bast fibers were longer in length than core fibers. Core fibers had thin cell walls, broad lumen areas, and short lengths, and they had collapsed shape even in water. These characteristics of core fibers affected strength properties of handsheet positively. When the amount of core fibers increased, the strength properties of handsheet were increased. When the amount of bast fibers increased, the handsheet had rougher surface and higher air permeability.