• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.6
• /
• pp.1-7
• /
• 2004

We performed two-dimensional (20) computer-based modeling and simulation of FinFET by solving the coupled Poisson-Schrodinger equations quantum-mechanically in a self-consistent manner. The simulation results are carefully investigated for FinFET with gate length(Lg) varying from 10 to 80nm and with a Si-fin thickness($T_{fin}$) varying from 10 to 40nm. Current-voltage (I-V) characteristics are compared with the experimental data. Device optimization has been performed in order to suppress the short-channel effects (SCEs) including the sub-threshold swing, threshold voltage roll-off, drain induced barrier lowering (DIBL). The quantum-mechanical simulation is compared with the classical appmach in order to understand the influence of the electron confinement effect. Simulation results indicated that the FinFET is a promising structure to suppress the SCEs and the quantum-mechanical simulation is essential for applying nano-scale device structure.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1118-1130
• /
• 1999

In this paper, error performance of DS/FH CDMA system has been analyzed in a radio channel which is characterized by near-far problem and multi-path fading. The DS/FH CDMA system adopts Maximum Ratio Combining(MRC) diversity and BCH(Bose-Chau dhuri-Hocquenghem) coding techniques to enhance system performance. Using the derived error probability equation, the error performance of DS/FH CDMA system has been evaluated and shown in figures to discuss as a function of PN code length(N), hopping rate(q), number of diversity branch(M), coding rate($\gamma$) and bit energy per noise power ratio ${E_b/N_o}$. The results show that DS/FH system is more effective to restrain the affection of near-far problem and multi-path fading than DS system. And there is a substantial enhancement in performance by employing an MRC diversity or BCH coding techniques. Consequently, we expected that proposed system structure is reliable to the voice communication system in near-far problem and multi-path fading channel.

• Clinical and Experimental Reproductive Medicine
• /
• v.47 no.3
• /
• pp.207-212
• /
• 2020

Objective: Glutamate ionotropic receptor AMPA type subunit 1 (GRIA1) is a subunit of a ligand-gated ion channel that regulates the secretion of follicle-stimulating hormone (FSH) and luteinizing hormone (LH) by controlling the release of gonadotropin-releasing hormone. Few studies have investigated the association between the GRIA1 gene and human infertility. This study evaluated the association of the GRIA1 rs548294 C > T and rs2195450 G > A polymorphisms with the ovarian response to human menopausal gonadotropin (HMG) in Iranian women. Methods: One hundred women with histories of at least 1 year of infertility were included. On the second day of menstruation, patients were injected with HMG; on the third day, blood samples were collected. After hormonal analysis, the GRIA1 rs548294 C > T and rs2195450 G > A genotypes of samples were identified via the restriction fragment length polymorphism method, and on day 9, the number of follicles was assessed via ultrasound. Results: For the GRIA1 rs548294 C > T and rs2195450 G > A single nucleotide polymorphisms, the subjects with CT and GG genotypes, respectively, displayed the highest mean FSH level, LH level, and number of follicles on day 9 of the menstrual cycle (p< 0.05). Significant positive correlations were observed between LH and FSH (p< 0.01), LH and follicle count (p< 0.01), FSH and age (p< 0.05), follicle count and age (p= 0.048), and FSH and follicle count (p< 0.01). Conclusion: This study showed a significant relationship between GRIA1 polymorphisms and ovarian response to the induction of ovulation. Therefore, determining patients' GRIA1 genotype may be useful for improving treatment and prescribing suitable doses of ovulation-stimulating drugs.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.8 no.1
• /
• pp.1088-1096
• /
• 1966

The following is a method of synthetic unitgraph derivation based on the routing of a time area diagram through channel storage, studied by Clark-Jonstone and Laurenson. Unithy drograph (or unitgraph) is the hydrograph that would result from unit rainfall\ulcorner excess occuring uniformly with respect to both time and area over a catchment in unit time. By thus standarzing rainfall characteristics and ignoring loss, the unitgraph represents only the effects of catchment characteristics on the time distribution of runoff from a catchment The situation abten arises where it is desirable to derive a unitgraph for the design of dams, large bridge, and flood mitigation works such as levees, floodways and other flood control structures, and are also used in flood forecasting, and the necessary hydrologie records are not available. In such cases, if time and funds permit, it may be desirable to install the necessary raingauges, pruviometers, and stream gaging stations, and collect the necessary data over a period of years. On the otherhand, this procedure may be found either uneconomic or impossible on the grounds of time required, and it then becomes necessary to synthesise a unitgraph from a knowledge of the physical charcteristics of the catchment. In the preparing the approach to the solution of the problem we must select a number of catchment characteristic(shape, stream pattern, surface slope, and stream slope, etc.), a number of parameters that will define the magnitude and shape of the unit graph (e.g. peak discharge, time to peak, and base length, etc.), evaluate the catch-ment characteristics and unitgraph parameters selected, for a number of catchments having adequate rainfall and stream data and obtain Correlations between the two classes of data, and assume the relationships derived in just above question apply to other, ungaged, Catchments in the same region and, knowing the physical characteritics of these catchments, substitute for them in the relation\ulcorner ships to determine the corresponding unitgraph parameters. This method described in this note, based on the routing of a time area diagram through channel storage, appears to provide a logical line of research and they allow a readier correlation of unitgraph parameters with catchment characteristics. The main disadvantage of this method appears to be the error in routing all elements of rainfall excess through the same amount of storage. evertheless, it should be noted that the synthetic unitgraph method is more accurate than the rational method since it takes account of the shape and tophography of the catchment, channel storage, and temporal variation of rainfall excess, all of which are neglected in rational method.

• Journal of Korea Water Resources Association
• /
• v.52 no.spc2
• /
• pp.801-810
• /
• 2019

This study analyzes the impact on geomorphic changes downstream due to alternate bars developed weir upstream through laboratory experiments. The disturbance, such as a spur in the side wall, of the flow at the inlet of the channel triggers the development of alternate bar upstream at the beginning of the experiment, and gradually moved downstream with keeping their shapes over time. The bed in the downstream of weir in the mid of channel scoured due to the scarcity of sediment inflow because weir upstream traps it. Moreover, bar migration speed decreases as the bars approaches to the weir with time. However, as time increases, the alternate bars upstream migrate over the weir, and sediment in the eroded bed of the weir downstream are deposited. The phase of the bar upstream changes oppositely after passing through the weir. The phase of the bar downstream changes rapidly as the shape of alternate bar is clear upstream, which is affected by the strong disturbance. The phase of bar changes, and the bar migration speed decreases gradually with time, and finally stopped due to forcing effects on the bar by the disturbance. The faster the reaction of alternate bar with a long spur, the larger the bar height formed downstream and the shorter the bar length. This means that the larger the forcing effect of bar, the more it affects the bar migration. In addition, although the size of the alternate bar increases over time, the bar doesn't migrate downstream and a forced bar is generated.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.5
• /
• pp.303-313
• /
• 2010

This paper describes an acoustic communication receiver structure, which is designed for QPSK (Quadrature Phase Shift Keying) signal with 25 kHz carrier frequency and 5 kHz symbol rate, and takes samples from received signal at 100 kHz sampling rate. Based on the described receiver structure, optimum design parameters, such as number of taps of FF (Feed-Forward) and FB (Feed-Back) filters and forgetting factor of RLS (Recursive Least-Square) algorithm, of joint equalizer are determined to minimize the BER (Bit Error Rate) performance of the joint equalizer output symbols when the acquisition data in shallow water using implemented acoustic transducers is decimated at a rate of 2:1 and then enforced to the input of receiver. The transmission distances are 1.4 km, 2.9 km, and 4.7 km. Analysis results show that the optimum number of taps of FF and FB filters are different according to the distance between source and destination, but the optimum or near optimum value of forgetting factor is 0.997. Therefore, we can reach a conclusion that the proper receiver structure could change the number of taps of FF and FB filters with the fixed forgetting factor 0.997 according to the transmission distance. Another analysis result is that there are an acceptable performance degradation when the 16-tap-length simple filter is used as a low-pass filter of receiver instead of 161-tap-length matched filter.

• Molecules and Cells
• /
• v.22 no.1
• /
• pp.97-103
• /
• 2006

Phosphoinositides are critical regulators of ion channel and transporter activity. There are multiple isomers of biologically active phosphoinositides in the plasma membrane and the different lipid species are non-randomly distributed. However, the mechanism by which cells impose selectivity and directionality on lipid movements and so generate a non-random lipid distribution remains unclear. In the present study we investigated which structural elements of phosphoinositides are responsible for their subcellular location and movement. We incubated phosphatidylinositol (PI), phosphatidylinositol 4-monophosphate (PI(4)P) and phosphatidylinositol 4,5-bisphosphate ($PI(4,5)P_2$) with short or long acyl chains in CHO and HEK cells. We show that phosphate number and acyl chain length determine cellular location and translocation movement. In CHO cells, $PI(4,5)P_2$ with a long acyl chain was released into the cytosol easily because of a low partition coefficient whereas long chain PI was released more slowly because of a high partition coefficient. In HEK cells, the cellular location and translocation movement of PI were similar to those of PI in CHO cells, whereas those of $PI(4,5)P_2$ were different; some mechanism restricted the translocation movement of $PI(4,5)P_2$, and this is in good agreement with the extremely low lateral diffusion of $PI(4,5)P_2$. In contrast to the dependence on the number of phosphates of the phospholipid head group of long acyl chain analogs, short acyl chain phospholipids easily undergo translocation movement regardless of cell type and number of phosphates in the lipid headgroup.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.59-68
• /
• 2005

The amount of digitalized contents has been rapidly increased, but the main distribution channel of them is Internet which is easily accessible. Therefore 'security' necessarily arises as one of the most important issues and the method of protecting contents becomes a major research topic as much as data coding techniques. In recent years, many developers have studied on techniques that allow only authorized person to access contents. Among them the scrambling method is one of well-known security techniques. In this paper, we propose a simple and effective digital video scrambling method which utilizes the intra block properties of a recent video coding technique, H.264. Since intra prediction modes are adopted in H.264 standard, it is easy to scramble a video sequence with modification of the intra prediction modes. In addition to its simplicity, the proposed method does not increase bit rate after scrambling. The inter blocks are also distorted by scrambling intra blocks only. This paper introduces a new digital video scrambling method and verifies its effectiveness through simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.820-831
• /
• 1999

In this paper, we have compared the performance of a D-TDMA protocol with that of a CDMA protocol, in radio access system for integrated voice/data services.The D-TDMA protocol is based on a generic dynamic channel assignment approach to be followed a combination of “circuit mode” reservation for voice calls, along with dynamic first-come-first served assignment of remaining capacity for data messages. In the CDMA protocol, we have used the voice activity detection to reduce the interface power of other mobiles in internal and external cells, and analyzed the interference power ratio. Also we have computed BER(Bit Error Rate) by using this interference power ratio and evaluated voice blocking probability(voice packet loss probability) and data transmission delay, according to average data length and average data arrival rate.We have found the CDMA protocol achieves comparatively higher performance for short data length, regardless of data arrival rate. Otherwise, the data transmission delay of D-TDMA protocol is shorter than that of the CDMA protocol for long data message.

• Korean Journal of Optics and Photonics
• /
• v.26 no.5
• /
• pp.269-274
• /
• 2015

In this paper we design the optical system for an integrated two-channel TO-type optical transmitter to apply the HDMI interface using the code V simulator. The proposed integrated two-channel optical transmitter has two VCSELs attached in parallel on an 8-pin TO-CAN package, on top of which is a lens filter block ($1mm{\times}2mm{\times}4mm$) composed of hemispherical lenses and WDM filters. Considering two-channel transmitters manufactured with wavelength combinations of 1060nm/1270nm and 1330nm/1550nm, we obtain the optimum value of the diameter of the hemispherical lens as 0.6 mm for both combinations, and the distances L between the lens filter block and ball lens as 1.7 mm and 2.0 mm for the 1060nm/1270nm and 1330nm/1550nm wavelength combinations, respectively. At this time, the focal length f0 of the lens filter blocks for wavelengths of 1060, 1270, 1330, and 1550 nm are 0.351, 0.354, 0.355, and 0.359 mm, respectively, and the focal lengths F of light passing through the lens filter block and ball lens are 0.62 mm for 1060nm/1270nm and 0.60-0.66 mm for 1330nm/1550nm wavelength combinations.