• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.1
• /
• pp.6-9
• /
• 2013

"Onnuri" is a new orchardgrass (Dactylis glomerata L.) cultivar developed by the National Institute of Animal Science (NIAS) in 2011. To develop the new variety of orchardgrass, 5 superior clones were selected and polycrossed for seed production. The agronomic growth characteristics and forage productivity of "Onnuri" were examined at Cheonan from 2009 to 2011, and regional trials were conducted in Cheonan, Pyeongchang, Jinju and Jeju from 2009 to 2011, respectively. "Onnuri" showed medium type growth habit in fall and spring, and medium in length of flag leaf and long upper internode. Plant height of "Onnuri" was 5cm more than that of the standard cultivar, "Amba" and the heading date was 5 days earlier than that of Amba (16th May). Characteristics, such as waterlogging and disease resistance, of "Onnuri" were stronger or better than those of Amba, Especially, dry matter yield of "Onnuri" (14,775 kg/ha) increased by 18% compared to that of Amba (12,523 kg/ha). Nutritive values appeared to be similar in both varieties.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.315-323
• /
• 2014

In this study, thermal transmittance which is a parameter to measure the thermal performance was evaluated for an internal insulation versus an external insulation. Then the ISO regulation was applied to evaluate it, and the superiority of an external insulation was verified by the thermal transmittance values. The three zones of apartment housing were selected to evaluate the performance. (1) The junction of an outer wall and a protruded slab : If there is no a thermal bridge protection system, then the values are about same in the two insulation systems, so the protection system should certainly be installed. If it is installed, then the value for the external insulation is 2 times lower than internal system. (2) The junction of a side wall and a flat slab: The value is 0.509W/mK for the internal insulation and about zero for the external insulation. (3) The junction of an outer wall and a division wall: The value is 0.451W/mK for the internal insulation and also about zero for the external insulation. A domestic regulation that could evaluate a thermal transmittance has to be established by applying the ISO regulation for the evaluation of external insulation systems in apartment housing in the future. Additionally, the government must decide which length should be used for the national standard.

• Journal of Chest Surgery
• /
• v.53 no.2
• /
• pp.64-72
• /
• 2020

Background: It is generally agreed that using a bilateral internal thoracic artery (BITA) composite graft improves long-term survival after coronary artery bypass grafting (CABG). Although the left internal thoracic artery (LITA)-based Y-composite graft is widely adopted, technical or anatomical difficulties necessitate complex configurations. We aimed to investigate whether BITA configuration impacts survival or patency in patients undergoing coronary revascularization. Methods: Between January 2006 and June 2017, 1,161 patients underwent CABG at Seoul National University Bundang Hospital, where the standard technique is a LITA-based Y-composite graft with the right internal thoracic artery (RITA) sequentially anastomosed to non-left anterior descending (LAD) targets. Total of 160 patients underwent CABG using BITA with modifications. Their medical records and imaging data were reviewed retrospectively to investigate technical details, clinical outcomes, and graft patency. Results: Modifications of the typical Y-graft (group 1, n=90), LITA-based I-graft (group 2, n=39), and RITA-based composite graft (group 3, n=31) were used due to insufficient RITA length (47%), problems using LITA (28%), and target vessel anatomy (25%). The overall 30-day mortality rate was 1.9%. Among 116 patients who underwent computed tomography or conventional angiography at a mean interval of 29.9±33.1 months postoperatively, the graft patency rates were 98.7%, 95.3%, and 83.6% for the LAD, left circumflex artery, and right coronary artery territories, respectively. Patency rates for the inflow, secondary, and tertiary grafts were 98.2%, 90.5%, and 80.4%, respectively. The RITA-based graft (group 3) had the lowest patency rate of the various configurations (p<0.011). Conclusion: LITA-based Y composite graft, showed satisfactory clinical outcomes and patency whereas modifications of RITA- based composite graft had the lowest patency and 5-year survival rates. Therefore, when using RITA-based composite graft, other options should be considered before proceeding atypical configurations.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.261-264
• /
• 2004

New orchardgrass(Dactylis glomerata L.) variety named as 'Kordi' was developed by the National Livestock Research Institute(NLRI) in 2003. Five superior clones on selected to develope the new variety of orchardgrass, and polycrossed for synthetic seed production. Synthetic seeds were examined on the agronomic growth characteristics and forage production at Suwon from 1995 to 1998, and regional trials were conducted in Suwon, Pyungchang and Jeju from 2001 to 2003 and Icsan in 2003, respectively. 'Kordi' showed semi-erect growth habit in fall and spring, and long type in length of flag leaf and short in upper internode. Plant height of 'Kordi' was little short compared to that of standard variety, Ambassador, and heading date was delayed about 3 days as 14th May compared to Ambassador. Characters such as winter hardiness. lodging tolerance, regrowth, disease resistance of 'Kordi' were stronger or better than those of Ambassador. 'Kordi' showed $10\%$ higher dry matter yield as 15,174 kg/ha compared to Ambassador. Nutritive value was appeared to be similar in both varieties.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.4
• /
• pp.261-269
• /
• 2013

This paper describes the design and development of VSI (VLBI standard interface) optical adapter for transmitting VLBI(Very long baseline interferometry) observation data with optical signal. VSI cable comprised of 80-line is being used for observed data transmission with maximum length of 5-meter between playbacks (Mark5B, VERA2000) and raw VLBI data buffer (RVDB), RVDB and VLBI correlation subsystem (VCS) in Daejeon correlator. It has a plan to conduct the data processing for 16-stations and introduce the 14 RVDB systems in near future. And data loss frequently occurred because of trouble of VSI cable MDR80 connector. By considering the data loss by connector error of VSI cable, RVDB system extension plan, effective space usage and long distance data transmission(e-VLBI), the VSI optical adapter was proposed and developed for effectively transmitting and receiving VLBI data through optical signal. In order to confirming the performance of developed VSI optical adapter, the experiments for data transmission was conducted between playback and RVDB system, and confirmed that data transmission was clearly done without any data loss.

• The Korean Journal of Zoology
• /
• v.16 no.2
• /
• pp.127-137
• /
• 1973

Monosodium glutamate(MSG) is a widely used food additive. Some reports descried its positive effect and the others, negative effect on mouse, monkey, human or drosophilid flies. Because of the conflicting reports the present investigation was undertaken to study the effects of MSG on the development of Drosophila melanogaster. The two strains of D. melanogaster, Oregon-R and Sinchon-I were used and MSG as well as cane sugar (as the second control) media were prepared by adding MSG or cane sugar at various concentrations to the standard food media for the present study. Ten flies (Male 5, Female 5) were placed in each vial and the numbers of $F_1$ flies emerged from it were counted. The results are presented below: 1. The numbers of $F_1$ flies decrease as the concentrations of MSG increase, implying that MSG has an inhibitory effect in the development of D. melanogaster. 2. The effects of cane sugar show an enhancing effect rather than an inhibitory one. 3. The numbers of $F_1$ fies produced in the Sinchon-I strain are greater than in the Oregon-R. This may be due to the difference in the length of inbred period. 4. The Muller-5 test shows a negative result, suggesting that MSG may be not mutagenic.

• Korean Journal of Veterinary Service
• /
• v.30 no.3
• /
• pp.429-436
• /
• 2007

This study was performed to make helpful standard for discrimination of cows from heifers by uterine and ovarian section inspection. A total of 3,736 heifers and 249 cows were inspected from January to November 2006 in Karak Market Slaughter house. Firstly, it was obvious that non-corpus albicans were observed in almost heifers(3,597/3,736, 96.3%), but there were distinctive corpus albicans in all cows (249/249 100%). Secondly, another evident was that the length and diameter of the horn in uterus was below 30mm in 94.5% (3,267/3,736) heifers, but above 30mm in 90.4% (225/245) cows, and it was easy to distinguish between right and left horn by difference of size in 87.6% (218/249) cows. Thirdly the diameters of pelvic cavity was below 220mm in 96.8% (3,615/3,736) heifers, but was over 200mm in 85.1% (212/249) cows. Fourthly another difference was found in second sacrum union condition and 13th thoracic vertebral process's states. In case of heifers, it was distinctive five lines in each second sacrum, but it was non-distinctive or united in the same each lines of the sacrum in cows. Fifthly in the results of 13th thoracic vertebral colors, the ratio between red color and white color was 7 : 3 in heifers (3,385/3,736, 90.6%), but that was 2 : 8 in cows (199/249, 79.9%). Consequently, it was possible to use the method which discriminated cows from heifers by uterine and ovarian section inspection in large scaled field slaughter house.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.381-389
• /
• 2000

Lateral condensation with gutta-percha and sealer has been shown to provide an excellent apical seal; however, the lateral condensation technique has demonstrated less favorable apical leakage results in curved canals when compared with straight canals. Placement of endodontic spreaders to within 1 to 2mm of the root canal working length has been advocated for optimum gutta-percha obturation. Due to their stiffness, stainless-steel(SS) spreaders will often fail to achieve this position in curved canals. Newly marketed nickel-titanium(NT) spreaders may offer an advantage in this regard due to the increased flexibility of these instruments. The purpose of this study was to evaluate the effect of NT finger spreader on the sealing ability in lateral condensation technique, compared with conventional SS finger spreader. Twenty four standardized resin models simulating curved canals(30 degree) were randomly placed into 2 groups and instrumented to a #30 master apical file size with Ni-Ti Profile .04 taper series using step down technique. Each groups was obturated with standardized gutta-percha cone by standard lateral condensation technique using SS finger spreader, NT finger spreader. And then, each model was sectioned horizontally with microtome at 1, 2, 3, 4, 5mm levels from the apex. At each of 5 levels, ratio of the area of gutta-percha was obtained by calculating the area of gutta-percha to the total area of the canal. The data collected were then analyzed statistically using a t test for independent samples. The results as follows ; 1. The total mean ratio of area of gutta-percha was 89.20${\pm}$7.00(%) for SS spreader group. 92.20${\pm}$5.17(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). 2. At 3mm level, the mean ratio of area of gutta-percha was 88.32${\pm}$5.41(%) for SS spreader group, 95.25${\pm}$2.60(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). At 1,2,4mm levels, NT spreader group showed greater mean ratio of area of gutta-percha than SS spreader group, too. But there was no statistically significant difference. 3. At 5mm level, the mean ratio of area of gutta-percha was 91.83${\pm}$3.42(%) for SS spreader group, 87.91${\pm}$3.68(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). This study concluded that the NT spreader demonstrated somewhat favorable apical sealing effect than SS spreader in prepared curved canals. The clinical use of NT spreaders may enhance our ability to create better apical seals in curved canals, but further studies in this area will help clarify some of the remaining areas with which practitioners are concerned, such as compaction forces exerted by NT spreaders.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.40-55
• /
• 1997

The purpose of this study are to examine the characters of the lower half body shape in the middle aged women and to make slacks patttern on the base of four difference body shapes as follows. The lower half body shapes were classified into 4 types on the basis of their lateral view silhouette, whose characters were summarized as followings. (1) "Type 1" meant the right body shape with the standard protrusion of abdomen and hips. (2) "Type 2" showed the body shape with prominent hips, which had the flat abdominal silhouette and the greatly curved hips silhouette. (3) "Type 3" was the body shape with the prominent abdomen and the flat hips, in which the frontal view silhouette of the abdomen was greatly curved and the rear view silhouette of hips is less curved. (4) "Type 4" was characterized with prominent abdomen and hips. The slaks patterns were based on the lower half body shape characters and resulted in followings. (1) In the type 1, little difference from conventional patterns was seen in experiment pattern, in which the front waist girth was W/4{\times}0.5cm+0.5cm+fold(2.5cm) and the back waist girth W/4+0.5cm-0.5cm+dart(3.5cm). The front hip girth was defined as H/4+2.0cm+0.5cm and the back hip girth as H/4+2.0cm-0.5cm due to its increased ease amount produced by abdominal fat deposition. (2) In the type 2 experimental pattern, the front and back differences of the waist girth and the hip girth were defined as 1.0cm and 2.0cm separately. Accordingly, the front waist girth was W/4+0.5cm+ 1.0cm+fold(2.0cm), the back waist girth W/4+0.5cm-1.0cm+dart(6.5cm), the front hip girth H/4+2.0cm+1.0cm and the back hip girth H/4+2.0cm-1.0cm. (3) In type 3, the front waist girth was set up as W/4+0.5cm+0.5cm+fold (4.5cm) for the increased front fold amount and the back waist girth was W/4+0.5cm+0.5cm+dart(3.0cm). The front hip girth was made as H/4+2.5cm+0.5cm and the back hip girth H/4+2.5cm-0.5cm. (4) In type 4, considered were $\circled1$ the increased fornt fold amount due to the abdonimal protrusion, $\circled2$ the increased back dart amount and the decreased back dart length owing to the hips prominent and $\circled3$ the front and back differences of waist and hip girth for the lateral view silhouette. Therefore the front waist girth was defined as W/4+0.5cm+2.0cm+flod (5.0cm), the back waist girth as W/4+0.5cm-20.cm+dart(4.0cm), the front hip girth as H/4+2.0cm+1.0cm and the back hip girth as H/4+2.0cm-1.0cm. The sensory evaluation of appearance and comfort was appeared more suitable on the experiment pattern than on the conventional pattern.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.563-572
• /
• 1997

E-mail has been eidely used for unformation delivery as an Inernet serive. As multimedia etchnologies are developed rapidly, most of the recent Unternet infornation servies support multimedia data. E-mail system also needs to suport multimedia nesage. But Internet mail servise using simple maiol transfer protocol(SMTP) speci-fied in RFC 821/822 handles only ASCII text messages repressented with 7-bit code. Each line the message has the length limitation as well. Those are why it cannot satisfy the diverse user'w demands. Multipuepose Unternet mail extensions(MIMZE), which is a modification and supplement of RFC 822,was proposed for supporting transportation of multimedia data.It can solve the limitations of sizes and types in contents of a message. In this study the E-mail system has been designed and implemented according to the MIME standard in order to solve the limitations of transpotation of messages regardless of the message content type. Hypertext markup language(HTML)syntax is applied to the mail system, and so it is possible to display a message consisting of differnt media as an intergrated from for the purpose of better understanding a message. No application program is needed for displaying a message including image data,and convenience for user is considered in the system. The futuer work is to improve the E-mail system so that it may support motion pictures and sound information,Thereby tge perfor multimeda E-mail system providing inergrated user's wiew will be developed.