• 콘크리트학회지
• /
• 제6권2호
• /
• pp.169-179
• /
• 1994

주택건설은 극심한 건축자재 부족과 인력수급등의 많은 어려움을 격고 있는데, 이에 대한 문제의 해결방은 중 하나로 철근콘크리트 공사에서 철근의 가공조립공정을 보다 간소화하면서 그 기능의 효율성을 높이는 방법으로 구조용 용접철망과 루프형 용접철망을 이용한 공법이 제기되고 있다. 본 연구에서는 일방향 슬래브에 콘크리트 예상 압축강도가 $210kg/cm^2$일 때, 최대균열폭과 소성변형 능력에 영향을 미치는 요인인 사용철근의 종류, 최소철근비를 기준으로 한 인장철근비(${\rho}t$), 주변지지조건, 겹이음길이의 4가지 주요변수로 하여 슬래브의 구조적 특성 및 휨거동을 파악하는데 그 목적을 두었다. 연구결과, 소성변형능력은 이형철근을 사용한 슬래브가 용접철망을 사용한 슬래브보다 월등히 큰 것으로 나타났고, 겹이음된 슬래브에서는 겹이음길이 30D가 적절한 것으로 나타났다. 또한 최대균열폭은 용접철망과 루프형 용접철망을 사용한 슬래브가 이형철근을 사용한 슬래브 보다 균열폭을 억제하는 것으로 나타났다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2013년도 자성 및 자성재료 국제학술대회
• /
• pp.115-115
• /
• 2013

In order to pinpoint the different factors responsible for magnetization reversal, we performed simulation using OOMMF micromagnetic package for rectangular shaped permalloy element having length of $1{\mu}m$, width 50-100 nm and thickness 15-80 nm with length to width ratio L/W>4. Interestingly an increase in coercivity with thickness is found for every width below a critical thickness. With increasing width and thickness, the distinct behavior of coercivity, hysteresis loops and reversal mechanism are presented. Vortex end domains are observed during the magnetization reversal beyond particular thickness, where the three dimension reversal mechanism is expected to begin, causing a sudden increase in coercivity.

• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.115-124
• /
• 2023

By conducting three-dimensional simulation with consideration of small-strain characteristics of soil stiffness, the effects of excavation geometry and tunnel cover to diameter ratio on deformation mechanisms of an existing tunnel located either at a side of basement or directly underneath the basement were systematically studied. Field measurements were used to verify the numerical model and model parameters. For basement excavated at a side of an existing tunnel, the maximum settlement and horizontal displacement of the tunnel are always observed at the tunnel springline closer to basement and tunnel crown, respectively, regardless of basement geometry. By increasing basement length and width by five times, the maximum movements of tunnel located at the side of basement and directly underneath the basement increase by 450% and 186%, respectively. Obviously, tunnel movements are more sensitive to basement length rather than basement width. For basement excavated at a side of an existing tunnel, tunnel movements at basement centerline become stable when basement length reaches 10 H_e (i.e., final excavation depth). Moreover, tunnel heaves due to overlying basement excavation become stable when the normalized basement length (L/H_e) is larger than 8.0. As tunnel cover to diameter ratio varies from 2.5 to 3.0, the maximum heave and tensile strain of tunnel due to overlying basement excavation decrease by up to 41.0% and 44.5%, respectively. If basement length is less than 8 H_e, the assumption of plane strain condition of basement-tunnel interaction grossly overestimates tunnel movements, and ignores tensile strain of tunnel along its longitudinal direction. Thus, three-dimensional numerical analyses are required to obtain a reasonable estimation of tunnel responses due to adjacent and overlying basement excavations in clay.

• 한국방재학회 논문집
• /
• 제6권1호
• /
• pp.59-68
• /
• 2006

합류부는 유량의 변화, 흐름방향의 전환으로 순환흐름의 분리구역의 발생에 의한 통수단면의 축소에 의한 통수능의 저하와 이에 따른 배수의 영향이 야기된다. 지류와 본류와의 유량비와 합류각을 달리하면서 실험한 결과를 이용하여 분리구역의 특성을 규명하였다. 분리구역의 정의는 유함수를 이용하여 그 값이 0(영)인 유선을 분리구역으로 정의하여 그 길이와 폭을 본류 하천폭으로 나눈 무차원 길이비와 무차원 폭비로 하였고, 유선에 의한 분리구역의 연구결과가 기존의 실험들과 비교적 잘 맞는 것으로 나타났다. 작은 유량비와 합류각 30도에서는 분리구역이 나타나지 않아서 유량비와 합류각에 의한 분리구역의 출현경계식을 만들었다. 분리구역에 대한 고찰로 합류각, 유량비, 그리고 본류 하류에서의 Froude수에 의한 분리구역의 무차원 길이비와 폭비에 대한 기존의 실험식을 수정하였고, 수굴계수와 형상지수의 수리적 특성을 분석하였다. 일반적으로 유량비와 합류각이 커질수록 분리구역이 크게 나타났다. 합류부를 전후한 상하류 구간에서 수면의 추적에서 유량비와 합류각이 커질수록 배수위의 영향이 크게 나타났고, 합류부가 접하는 내측보다 외측의 배수영향이 크게 나타났다. 하류부 유량에 의해 등류수심을 산정하여 합류가 시작되는 점에서부터 하류의 등류수심에 이르는 곳까지의 거리를 $X_l$로 보고 합류각과 유량비와 단면폭 및 수축계수간의 상관관계식을 산출하였다. 유량비와 합류각에 따른 수로내의 배수위에 의한 최대수위와 분리구역에서의 최소수심과의 비를 분석하였다.

• Animal Systematics, Evolution and Diversity
• /
• 제31권1호
• /
• pp.31-41
• /
• 2015

A new species of the genus Farranula Wilson, 1942 (Cyclopoida, Corycaeidae) is described based on both sexes collected off Chuuk Island in Micronesia (West Central Pacific). The new species F. dahlae differs from its close congener F. gibbula (Giesbrecht, 1891) in the following combination of characters in both sexes: body length is longer, length to width ratio of caudal rami is larger, basal element of maxilliped is distinctly longer, and terminal spine to distal segment ratio of P4 is smaller; while in females, lateral margins of fourth pedigerous somite are extended to mid-region of second urosomal somite, maximum width of the second urosomal somite is located at middle region in dorsal and lateral views, and length ratio of caudal seta III to seta V is much larger; and in males, sharply contracted portion of second somite is located at two-thirds distance from anterior margin. Some additional morphological details of F. gibbula are given and a key to species of the genus Farranula is provided.

• 대기
• /
• 제17권4호
• /
• pp.381-391
• /
• 2007

The characteristics of flow around a single obstacle with fixed height and varied length and width are numerically investigated using a computational fluid dynamics (CFD) model. As the obstacle length increases, flow distortion near the upwind side of the obstacle increases and the size of the recirculation zone behind the obstacle also increases. As the obstacle width increases, the size of the recirculation zone decreases, despite almost invariable flow distortion near the upwind side of the obstacle. Flow passing through an obstacle is separated, one part going around the obstacle and the other crossing over the obstacle. The size of the recirculation zone is determined by the distance between the obstacle and the point (reattachment point) at which both the flows converge. When the obstacle width is relatively large, flows are reattached at the obstacle surface and their recoveries occur. Resultant shortening of the paths of flows crossing over and going around decreases the size of the recirculation zone. To support this, the extent of flow distortion defined based on the change in wind direction is analyzed. The result shows that flow distortion is largest near the ground surface and decreases with height. An increase in obstacle length increases the frontal area fraction of flow distortion around the obstacle. In the cases of increasing the width, the frontal area fraction near the upwind side of the obstacle does not change much, but near the downwind side, it becomes larger as the width increases. The frontal area fraction is in a better correlation with the size of the recirculation zone than the building aspect ratios, suggesting that the frontal area fraction is a good indicator for explaining the variation in the size of the recirculation zone with the building aspect ratios.

• 대한기계학회논문집B
• /
• 제21권7호
• /
• pp.849-861
• /
• 1997

In this study, the effect of hole geometry of the cooling system on the flow and temperature field was numerically calculated. The finite volume method was employed to discretize the governing equation based on the non-orthogonal coordinate with non-staggered variable arrangement. The standard k-.epsilon. turbulence model was used and also the predicted results were compared with the experimental data to validate numerical modeling. The predicted results showed good agreement in all cases. To analyze the effect of the discharge coefficient for slots of different length to width, the inlet chamfering and radiusing holes were considered. The discharge coefficient was increased with increment of the chamfering ratio, radiusing ratio and slot length to width and also the effect of radiusing showed better result than chamfering in all cases. In order to analyze the difference between the predicted results with plenum region and without plenum region, the velocity profiles of jet exit region for a various flow conditions were calculated. The normal velocity components of jet exit showed big difference for the low slot length to width and high blowing rate cases. To analyze the flow phenomena injected from a row of inclined holes in a real turbine blade, three dimensional flow and temperature distribution of the region including plenum, hole and cross stream with flow conditions were numerically calculated. The results have shown three-dimensional flow characteristics, such as the development of counter rotating vortices, jetting effect and low momentum region within the hole in addition to counter rotating vortex structure in the cross stream.

• 사상체질의학회지
• /
• 제10권2호
• /
• pp.221-270
• /
• 1998

Objective This research is a study about constitutional diagnosis through the external appearances as a basic principle, and it is for finding shape differences of the ear, eye, nose, mouth according to the Sasang constitution Method We have collected 209 cases of patients of the Sasang Constitutional Department, including employees of the Kyung-Hee Medical Center and took pictures of the frontal view, lateral view, oblique view of face and measured heights, deapth, breadths of ear, eye, nose, mouth with 'The Measurement of R. Martin'. We analyzed shape differences of the face according to the Sasang constitution with certain results Results We got the morphologic characteristics of ear, eye, nose and mouth according to the Sasang constitution as Table 3. -Table 10. Conclusion : 1. The morphologic characteristics of Ear according to the Sasang constitution (1) Morphologic ear length, Physiognomic ear length, Ear lobule length is longer in Taeumin than Soeumin. (2) Physiognomic ear breadth is wider in Taeumin than Soeumin. (3) Physiognomic ear length, lobule length ratio is higher in Taeumin than Soyangin. 2. The morphologic characteristics of Eye according to the Sasang constitution. (1) Inner Palpebral fissure width, 5th Palpebral fissure length, Bizygomatic breadth-Outercanthal distance is the longest in Taeumin (2) Palpebral fissure inclination is widest in Soeumin. (3) Palpebral fissure length is longer in Taeumin than Soeumin. (4) Pupillary diameter ratio is the lowest in Taeumin (5) Palpebral fissure length, width ratio is higher in Soeumin than Taeumin. (6)zygomatic breadth, Bizygomatic breadth-Outercanthal distance ratio is the higher in Taeumin than Soeumin. 3. The morphologic characteristics of Nose according to the Sasang constitution. (1) Nasion depth is deepest in Soyangin. (2) Nasion to pupillary depth is deeper Soyangin than Taeumin. (3) Nasal tip depth, Nostril to Nasalalar depth is deeper Soyangin than Taeumin. (4) Subnasale to Nasalalar depth is the shallowest in Taeumin (5) Nasalalar height is lowest in Soeumin. (6) Nasalalar to Nostril distance is deeper Taeumin than Soeumin. (7) Nasal tip depth, Nasal depth ratio is the highest in Taeumin (8) Nasal depth Nasalalar heightratio is lowest in Soeumin. (9) Midfaceheight, Nasal tip depth ratio is higher Soyangin than Taeumin. 4. The morphologic characteristics of mouth according to the Sasang constitution. (1) Lower mid lip height, Lower philtrum height, Lower quarter lip height, Total middle lip height, Total philtrum height, Total quarter lip height is the shottest in Soyangin. (2) Upper mid lip height, Upper philtrum height is longer in Taeumin than Soyangin (3) Lip inclination is higher in Soeumin than Soyangin. (4) Intercheilion breadth, total height ratio is lowest in Soyangin. (5) Total lip height, Upper philtrum height ratio is higher in Soyangin than Soeumin. (6) Lower lip height Lower quarter lip height ratio is higher in Soyangin than Taeumin. (8) Total lip area is wider in Taeumin than Soyangin.

• Plant Resources
• /
• 제5권3호
• /
• pp.214-223
• /
• 2002

The objective of this study was to understand the conservation of gene resources and provide information for mass selection' of winter bud characters among the selected populations of Kalopanax septemlobus Koidz using analysis of variance(ANOVA) tests. The obtained results are shown below; 1. Ten populations of K. septemlobus were selected for the study of the variation of winter bud characters in Korea. The results of the analysis of variance(ANOVA) tests shows that there were statistically significant differences in all of the winter bud characters among those populations. 2. Correlation analysis shows that width between Height and DBH(Diameter at breast height) characters have negative relationship with all of the characters, as ABL(Apical branch length), ABW(Apical branch width), AWBL(Apical branch winter bud length), AWBW(Apical branch winter bud width), ABT(Apical branch No. of thorns), ABLB(Apical branch No. of lateral bud) and LBL(Lateral branch length), LBW(Lateral branch width), LBT(Lateral branch No. of thorns), LBLB(Lateral branch No. of lateral bud). 3. The result of principal component analysis(PCA) for winter buds showed that the first principal components(PC' s) to the fourth principal component explains about 78% of the total variation. The first principal component(PC) was correlated with AWBW, LWBW, and LBL and the ratio of ABL/ABW and LBL/LBW out of 16 winter bud characters. The second principal component correlated with ABL, ABW, ABLB, LWBL(Lateral branch winter bud length), and LBW and the ratio of AWBL/AWBW. The third principal component correlated with ABL, ABW, LWBL, LBL, and the ratio of LBL/LBW. The fourth principal component correlated with LBL and the ratio of LWBL/LWBW(Lateral branch winter bud width), LBL/LBW. Therefore, these characters were important to analysis of the variation for winter bud characters among selected populations of K. septemlobus in Korea. 4. Cluster analysis using the average linkage method based on 10 selected populations for the 16 winter bud characters of K. septemlobus in Korea showed a clustering into two groups by level of distance 1.1(Fig. 3). As can be seen in Fig. 3, Group I consisted of three areas(Mt. Sori, Mt. Balwang and Mt. Worak) and Group Ⅱ contisted of seven areas(Suwon, Mt. Chuwang, Mt. Kyeryong, Mt. Kaji, Mt. Jiri, Muan, and Mt. Halla). The result of cluster analysis for winter bud characters corresponded well with principal component analysis, as is shown in Fig. 2.

• Journal of Biosystems Engineering
• /
• 제19권1호
• /
• pp.9-16
• /
• 1994

135 and 136 pine cones were sampled from age class of II to VI Korean pine trees for the study of their physical properties in 1991 and 1992, respectively. The length, width, weight, volume, and the largest projected area of cones were measured, and the specific gravity, apparent volume ratio sphericity, and roundness were calculated. Regression analysis were performed for the weight, volume, and projected area to the cone length and width. The length, and major and minor diameters of the cone stalks were measured and analyzed. 1. The range of the length of cone stalks was 0 to 47.3mm. The average length of stalks were 9mm ('91) and 10mm('92), respectively. Cross section of the stalks was ellipse with average major and minor diameters of 9.1mm and 10.1mm, and 8.6 and 8.7mm in 91 and 92, respectively. 2. The length of pine cones distributed from 8cm to 17cm and the average length were about 13cm('91, '92). The width varied from 5cm to 9.5cm and the average width were 6.7cm('91) and 6.9cm('92). The ratios of the length to the width were 0.56('91) and 0.65('91) and the shape of the cones were found to be ellipse with minor diameter of 1/2 to 2/3 of the major diameter. 3. The roundnesses and sphericity of cones were 0.74 and 0.75('91), 0.63 and 0.67('92), respectively. The average of the largest projected area of cones were $85.3cm^2$('91) and $93.1cm^2$('92) and the criterion areas were $71.0cm^2$ and $74.5cm^2$, respectively. 4. Cone weights were from 83g to 467g('91 and '92) and averages were 186g('91) and 220g('92). The average specific gravities were 0.89 and 0.96('91 and '92). The true volumes were $212cm^2$('91) and $230cm^2$('92), and the average bulk volume was $321cm^2$('91, '92). The average apparent volume ratios of cones were 35% ('91) and 28% ('92), respectively. 5. The weight and the volume were proportional to the length of the cone multiplied by the width squred and the largest projected area was proportional to the length multiplied by the width of cones.