• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.240-246
• /
• 2013

Data from 540 subjects (included in the obesity group whose BMI was over 25) was selected from 2,445 subjects in the $6^{th}$ Korean Body Size Survey. A total of 25 direct measurements were selected for the relevant literature lower body size measurement analysis, that included 9 components related to BMI, height and circumferences, 3 components related to width and thickness, 5 components related to length, 3 components related to height, and 2 other components. Descriptive statistics, factor analysis, cluster analysis and variance analysis were executed using PASW 18.0 to analyze the data. In accordance with the factor analysis results to classify the lower body shape of overweight women in their 20s to 60s whose BMI was over 25, 4 factors were identified (lower body volume, leg volume, lower body length and leg length). A total of 4 lower body shapes of overweight women were found through cluster analysis using 4 factor scores from the factor analysis. Body Shape 1 had the largest lower body and leg volume. It was the heaviest group. Leg length was at a normal level. Body Shape 1 was 22.2% (122 subjects). Body Shape 2 had the longest legs and the smallest body shape; however, Body Shape 2 was the leg obesity group with the largest leg volume. It was 39.8% (215 subjects). Body Shape 3 had a smaller leg volume in proportion to the lower body thickness and a long lower body length. It comprised 27.8% (150 subjects). Body Shape 4 comprised 9.8% (53 subjects) with the shortest leg. Its lower body obesity was at a normal level.

• 패션비즈니스
• /
• 제28권4호
• /
• pp.74-92
• /
• 2024

This study aimed to classify leg shapes of adult males according to their obesity levels and examine characteristics of each type. The goal was to provide essential data for developing tight-fit pants patterns for adult males. Factors defining leg shapes of adult males were identified as leg horizontal factor, leg vertical factor, ankle thickness factor, and ankle height factor. Leg shapes were categorized into four types: 1) type 1, medium-thick, short legs with thin, medium-height ankles; 2) type 2, medium-thick, long legs with thin, low-height ankles; 3) type 3, thin, medium-length legs with thick, high-height ankles; and 4) type 4, thick, short legs with thick, medium-height ankles. The higher the obesity level, the greater the proportion of type 4, whereas the lower the obesity level, the greater the proportion of types 2 and 3. This suggests that as obesity levels increase, the number of individuals with very thick legs, thick ankles, and shorter legs also increases. Implications of leg shape according to obesity levels in adult males are as follows. First, different age groups require distinct pants patterns. Second, when grading sizes, the variation by body part should be adjusted according to age group. This study is significant as it classifies leg shapes of adult males based on obesity levels and examines characteristics of each type.

• 한국의류학회지
• /
• 제48권6호
• /
• pp.1164-1179
• /
• 2024

This study aimed to analyze and categorize the leg shapes of normal-weight adult women in their 20s and 30s with the ideal body shape. In other words, it attempted to extract basic data necessary for developing pants patterns for adult women. Adult women were categorized into three leg types: sheep-legged, with thick and large knuckles and thighs but thin ankles and low ankle height; straight-legged, with thick ankles and knees and thin knuckles and thighs; and crane-legged, with normal leg and ankle thickness but thin knees. Developing pants patterns for adult women in their 20s and 30s suggests that sheep-legged women should use an outward curve instead of the inward curve found in conventional patterns to accommodate their thighs and provide extra leg space. Furthermore, straight-legged people should reorganize their drafting from a straight line from knee to ankle to a curved line that curves inward to reduce the amount of slack in the hip area. The crane-legged type requires a drafting method that sets less allowance at the knee. Moreover, new pants drafting methods should account for the unique characteristics of each type, including hip allowance and the inner and outer leg lines.

• 한국의류학회지
• /
• 제39권1호
• /
• pp.63-76
• /
• 2015

This study conducted a survey to gauge the buying and wearing propensities of wearers of leg guards made for baseball catchers, as well as product characteristics of preferred leg guards. Data from the survey were analyzed to obtain basic data for the development of an advanced leg guard design. Degree of compression, horizontal distance, cross section view and outline 3D sketch were also analyzed from the 3D data of leg guards; in addition, mobility and kinematic analysis were conducted through a wearing test. The survey indicated that imported products dominate the current retail market because they are appreciated by customers in terms of fit, price, brand, and protection. Representative complaints of products were discomfort, pressure, and the heavy-weight of the leg guards in general attributed to overall structure and 3D shape. When the pressure was lower on the front area of knee, it feels better to wear and the average knee angular velocity during the up and down motion increased, which suggests a better design from a kinematic point of view. The knee is the primary part of the body responsible for any movement of the lower limbs; consequently, the degree of compression and support stability of the leg guards near the knee area are important factors to evaluate the performance of leg guards. The results of our study indicate significant opportunities for improvement in product design and the development of baseball leg guards along with an ergonomic design that considers the mobility of the knee, skin deformations is necessary to improve performance. The process followed in this study will be applicable to studies on other personal protective equipment for sports.

• 한국컴퓨터정보학회논문지
• /
• 제24권3호
• /
• pp.135-141
• /
• 2019

The purpose of this study was to analyze the direct measurement data of 20-25 years male university students of 7th Size Korea data and to characterize and to type the body shape of lower body. It was to provide basic data for male university students' pants pattern production. The lower body part consisted of the 'horizontal factor' of the lower body composed of circumference, thickness, width, and 'vertical factor' of the lower body composed of the length and height. This was consistent with the analysis of the body shape factor of the lower half of male adolescents. The lower body shape was classified into four types. Type 1 was thick and relatively long in the lower body and was named 'thick long leg'. Type 2 was named 'short bird legs' because the lower body was thin and relatively short. Type 3 was relatively thin and long, so the lower body was named 'long crane leg'. In Type 4, the lower body was relatively thick and short, which means 'short pillar leg'. In the case of 20-25 year-old male university students, they have different body shapes depending on the girth and length of the lower half of their body as they have reached adulthood. Therefore, it would be necessary to provide a sales system that allows the repair of the length of the pants to be facilitated, and the length of the pants to be repaired when the pants are selected according to the circumference. Future studies will need to classify the body shape according to angle and flatness.

• 한국의류산업학회지
• /
• 제20권2호
• /
• pp.219-225
• /
• 2018

The purpose of this study is to make an ideal dummy for adult Maltese with proper investigation of its character and direct measurement of dog body-shape. The results of the study are as follows; First, there were 6 factors to affect the characteristics of Maltese body in the analysis, which are size of body, leg shape, chest shape, leg thickness, body length, length between fore-legs. In the cluster analysis with the 6 factors there were two types of Maltese body. Type 1 has body characteristics with large body, thick leg, and small distance between front legs. Type 2 has average size of all factors including body size, leg thickness, and length between fore-legs. Second, type 2 was selected as a representative one to make a dummy reflected body shape of characteristics because it took 67.71% from entire considered factors and has average value in the measured size. The first dummy pattern was planned by copying the surface area of the representative body shape with the method of surgical tape. A dummy of single body with trunk and legs was made using 30's cotton cloth, polyester inside batting, compressed form PVC and metallic wire on the joint of trunk and legs to support dummy shape. The second pattern was made by correcting size difference of the pattern and adding the pattern of neck covering plate, metal magnetic button was inserted on the center of joint area of trunk and legs to make detachable legs for easy slip on and off the pet's wear.

• Animal cells and systems
• /
• 제1권3호
• /
• pp.419-423
• /
• 1997

Two new marine tardigrades, florarctus kwoni n. sp. and Batillipes philippinensis n. sp. belonging to Halechiniscidae and Batillipedidae, respectively, are described on the basis of the specimens sieved from sublittoral coral sands and shell gravels of Palawan Island, the Philippines. florarctus kwoni n. sp. is characterized by the rocket-shaped aliform expansion, with the distal margin of posterior ala flattened. Batillipes philippinensis n. sp. closely resembles B. similis Schulz, 1955 and B. annulatus De Zio, 1962. However, it is clearly discernible from the former by the shape of lateral body projection between leg III and leg IV, and the relative length of cirrus E and the spine on leg IV, and from the latter by the shape of the lateral body projection and the clavar shape. This is the first report of the marine tardigrades from the Philippines.

• 패션비즈니스
• /
• 제22권2호
• /
• pp.27-39
• /
• 2018

This study analyzed the body shape of women over 70 years and classified their body shapes in order to provide basic data for the development of pants patterns that can complement the weakness of the body shape of elderly women. It were analyzed using SPSS Ver. 20.0. Five factors were extracted from the lower body: obesity and thigh thickness, lower body length, under knee thickness, ankle height, and hip sag. In type 1, the lower body was obese and the legs were thick, but the hips were not sagging. It was named 'high-hip obesity figure'. Type 2's abdomen, hip, and waist were obese, but the legs were thin and the hip were not sagging. Thus, 'bird-leg middle obesity figure' was the name. Type 3 had a long and slender lower body, but legs were thick and the hips were saggy, it was named 'strong-leg low-hip slender figure'. The elderly women showed less difference in waist, abdomen, and hip circumference. The abdominal circumference was 2-3cm more than the waist and hip circumference; hence there is a need to differentiate the shape and number of darts in the production of bottom-wear patterns for older women. In addition, the leg circumference is gradually reduced by aging compared to the size of the lower body. Therefore, it would be necessary to search for a method that can effectively design the difference between the hip circumference and the leg circumference in relation to the body shape and the aesthetics of older women.

• 한국전자통신학회논문지
• /
• 제19권3호
• /
• pp.589-602
• /
• 2024

열전 발전기(TEG)는 일반적으로 열 변환 효율이 높지 않다. 열전 발전기 모듈의 성능은 재료의 특성, 다리의 개수 외에도 다리의 형상에 따라 달라진다. 본 연구에서는 폐열을 효율적으로 수확할 수 있도록 열전소자의 다리 형상을 원통형, 큐브형 등 다양한 기하학적 구조로 모델링하여 전기적 특성을 수치상으로 비교하였다. 다리 형상에 따른 온도분포 및 발전량을 비교하였고 기존 Cube 모양이 가장 높게 나타났다. 냉각효과를 적용한 발전량을 비교한 결과 자연대류에서는 Cone, 강제대류에서는 Hourglass 모양이 가장 높았다. 본 연구 결과에 따르면 기하학적 구조가 열전 발전기의 효율에 영향을 미칠 수 있음을 확인하였다

• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.735-739
• /
• 2011

In this study, a chair with 5 or 6 legs was designed using the commercial program CATIA V5 in order to efficiently design considering the load conditions. In addition, the stress analysis and shape optimization were carried out using ANSYS Workbench for the chair consisting of stainless steel, aluminum alloys, magnesium alloys and structural steel. As a result, a chair with five legs showed the maximum equivalent stress at the end of the edge of the wheel parts and on the other hand, a chair with six legs showed the maximum equivalent stress at the corner of the connecting parts of the pillar and leg. In addition, the material and the weight was reduced by shape optimization for the chair model with 5 legs and maximum equivalent stress for stainless steel was found that greatly relaxed, compared with that of before shape optimization model.