• Journal of Preventive Medicine and Public Health
• /
• v.25 no.1 s.37
• /
• pp.26-33
• /
• 1992

The carpal tunnel syndrome is one of the most common peripheral nerve entrapment syndromes. The typical symptoms are pain, numbness and paresthesia in the median nerve territory of the hand. Recently, it is widely recognized that occupational factor is regarded as the important cause of the carpal tunnel syndrome. Clinical study is performed in the 42 female workers who is repetitively working at packing department in a rayon manufacturing factory from November 1991 till March 1992. The study included a questionnaire, physical examinations, and the neurophysiological test. The summary of the results obtained was as follows : 1. Among 42 packing workers, 9 workers(21.4%) were diagnosed as carpal tunnel syndrome by electromyography. The affected side was bilateral in 4 workers(9.5%), right in 4 workers(9.5%), and left in one worker(2.4%). 2. Among 42 subjects, 28 workers(66.7%) complained the clinical symptoms related to carpal tunnel syndrome, 11 workers(26.2%) showed positive Phalen sign, and 7 workers(16.7%) showed positive Tinel sign. 3. Researchers regard electromyographic finding as the gold standard for diagnosis of carpal tunnel syndrome. The sensitivity and specificity of the clinical symptoms to diagnose the carpal tunnel syndrome were 0.89, 0.39 respectively. If the carpal tunnel syndrome is diagnosed by the combination of the positive findings of the symptoms and the physical examinations, either Tinel or Phalen sign, the sensitivity and specificity were 0.67 and 0.76 respectively. Considering above results, though this small number of workers is not adequate for epidemiologic conclusions, carpal tunnel syndrome seems to be an important occupational disorder among packing workers in a rayon manufacturing factory.

• Journal of Veterinary Clinics
• /
• v.26 no.6
• /
• pp.563-567
• /
• 2009

This study compared the instrument performance and tissue healing of a steel scalpel with a $CO_2$ laser in an animal uterine surgery model. Five Landrace and Yorkshire mixed breed pigs were used. Two symmetrical incisions were made in the uterine of each pig. One incision was made on the left side of the uterine horn using a steel scalpel, while the other incision was performed on the right side using a $CO_2$ laser with an 8W output power. Each instrument was evaluated clinically for speed, ease of incision, and extent of bleeding. An ovariohysterectomy was performed at 21 days after the surgical procedure for a histological examination. The scalpel was an easier instrument to use in the confines of the uterine tissue, compared with the laser. However, there is no significant difference between the two groups. The amount of bleeding was less in the laser group but the time of the incisions was shorter with the scalpel. Postoperative uterus adhesion in the $CO_2$ laser incisions was lower than the scalpel incisions. Scalpel incisions showed complete restoration of the epithelium and endometrial gland. On the other hand, the laser incisions showed incomplete restoration of the epithelium and endometrial gland. Although the scalpel produced less damage to the uterine tissue and was easier to handle than the $CO_2$ laser, it did not provide hemostasis that was helpful for use on highly vascular tissue. The $CO_2$ laser provided good hemostasis but delayed wound healing.

• Korean Journal of Materials Research
• /
• v.1 no.1
• /
• pp.46-53
• /
• 1991

The stress of PSG (Phosphosilicate glass), USG (Undoped-silicate grass) and SiN films, which are mainly used as passivation layers in semiconductor memory devices, deposited by CVD methods has been studied as a function of film thickness and holding time in air. The stress of the PSG film or the USG film is increased in tensile state with increasing film thickness. On the other hand the stress level of the SiN film in compressive stress does not change as film thickness changes. The stress of PSG film shows the drastic change from the tensile stress to the compressive stress after the film is left 2 days in air. FTIR spectra indicated that the stress variation was due to the penetration of water molecule. It looks possible to recover the stress of about $2.5{\times}{10^9}dyne/cm^2$ by annealing treatment at $300^{\circ}C$ for 20min. The total stress of multi-layered films having the PSG film is determined mainly by the stress variation of PSG layer with holding time. The total stress of multi-layered film appears to have a functional relationship with the stress in the thickness of each film. The resistance against stress-migration of sputtered Al line increases with increasing the tensile stress for the PSG film or the USG film.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.132-136
• /
• 2010

Psychophysical experiment was performed to investigate how audio-visual spatial disparity affects on perceptual space in peripheral vision. In the experiment, participants were exposed to two stimuli of vision and sound which comes simultaneously from different directions, respectively. The visual stimulus was implemented by 7 white LEDs which were located at an equal distance with 7 different angles of $-70^{\circ}$, $-40^{\circ}$, $-20^{\circ}$, $0^{\circ}$, $20^{\circ}$, $40^{\circ}$, and $70^{\circ}$ from the right front. Those audial stimuli were also implemented by loudspeakers which were placed at 9 different directions equally spaced by $5^{\circ}$ ranged from $-20^{\circ}$ to $20^{\circ}$. Each participant then evaluated spatial disparity between visual and audial stimuli with 5 levels of response, in which the higher level indicates the larger gap. When the visual stimulus is applied from the right, the results show that the response level gets higher for a larger angle between visual and auditory stimuli. A similar tendency for the visual stimulus with $0^{\circ}$ orientation was also be observed. On the other hand, when the visual stimulus is applied from the left, the response level gets lower for the larger angle.

• Journal of Korean Medical classics
• /
• v.23 no.2
• /
• pp.157-189
• /
• 2010

Many chapters of the Hwangjenaegyeong[HN] explain the process of transmission and transmutation of disease. The transmission and transmutation process in the HN can be categorized into one between the viscera and bowels, and another of the external pathogenic gi itself. The process between the viscera and bowels indicates the transport of the pathologic burden between each viscera and bowel. This again is categorized into three types. Interpromoting, intercontrolling and that by Saeng-yang(生陽), Sa-eum(死陰). Next, the transport of the pathogenic gi can be categorized into one moving inwards from the exterior according to personal traits, and that according to the three Eum and three Yang. Although there are numerous types of transmission and transmutation, there are two main criteria in understanding the process. First, whether the process is in accordance with the physiological or natural flow of the body. Interpromoting and three Eum three Yang processes are such examples. To follow the physiological flow of the body means to correspond to either the Heaven and Earth or the original physiology of the human body. Therefore, the disease progresses according to a certain date or season. This indicates a partial malfunction in the circulation of the vital energy, which is relatively easy to recover. In contrast, there are processes that go against the physiological flow, for example, intercontrolling transmission and transmutation. This process focuses on the movement of the pathogenic gi rather than the vital gi. The disease progresses regardless of the flow of the vital energy, and sequential functional damage occurs accordingly. Consequently, as the transmission and transmutation continue, formerly passed organs are left damaged, and the whole process is headed towards death. The second criteria for understanding the process is whether it is cyclic or not. To have a cyclic pattern means that the occurrence of a disease and the time of death is not fixed. Transmission and transmutation processes that have a cyclic pattern mostly follow the physiological flow of the body. As a result, they rarely end in deaths, and the process is centered on vital energy. On the other hand, those with acyclic patterns have a fixed occurrence and death point in the course of the disease. They are mostly unnatural processes, found in fatal acute diseases or consumption diseases.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.6
• /
• pp.54-63
• /
• 1999

Considering that rural village had evolved through a long-sustained effort of harmnization with nature, there should be the wisdom not only to reflect the level of rural resident's housing demand, but also to conserve the traditional characteristics of high-valuation in the modern rural housing. In Korea , standard design proposals of rural houses had been made public three times ; in 1972 , 1984 and 1995. so , firstly, this study analysed the inner-space layouts of design proposals mentioned above, from which changes and problems in the past housing design were derived. And also, through, the positive acceptance of residents' opinion living inthe houses built by standard design proposals in 1970 ~1980's, improved design principles and an alternative model were proposed , finally. The inner-space structed of standard design proposals in 1970s was originated from small-scaled and low-priced one, basically under the " open system". In 1980s, the basic design principle changed to the 'closed system' in which the living room being the focus of indoor family life, and , in 1990s, progressively, therural housing developed to the high qualified type by the spatial enlargement and with increased equipements. However, this structural change of rural house brought about the problem of functional separatioon between farming and daily living activities. In details, limited spaces of multipurpose spaces and sanitary facility would be mentioned as problems for improvement. conclusively in this study, newoly arranged "open system" was recommended , as a basic design principle for theinner space structure formation of rural house, which easily links the constituent inner-house spaces to outer one. Based on this principle, the detailed design criterial was proposed as follows ; 1. The living room be directly linked to the front-yard and centrally placed, the addtional space of which could be secured for the special family events by the flexibleuse of its adjacent room or by the housing of male quarters(separated from main building quarter). 2. The kitchen also be directly linked to side-yard and to livng room , for the convenience of farming activities and the shortening of path flow housewife. 3. The expanded toilet-and-bathroom be placed in the directly connected left-hand side to the living room and also be allowed access through multipurpose spaces to out door. 4. The multipurpose spaces be directly connected to the kitchen and the toilet and-bathroom , of which function would be for undressing of working clothes, quickwashing and ordinary working.nd ordinary working.

• The Korean Journal of Financial Management
• /
• v.22 no.1
• /
• pp.119-146
• /
• 2005

This study applies extreme value theory to get extreme value-VAR for Korean Stock market and showed the usefulness of the approach. Block maxima model and POT model were used as extreme value models and tested which model was more appropriate through back testing. It was shown that the block maxima model was unstable as the variation of the estimate was very large depending on the confidence level and the magnitude of the estimates depended largely on the block size. This shows that block maxima model was not appropriate for Korean Stock market. On the other hand POT model was relatively stable even though extreme value VAR depended on the selection of the critical value. Back test also showed VAR showed a better result than delta VAR above 97.5% confidence level. POT model performs better the higher the confidence level, which suggests that POT model is useful as a risk management tool especially for VAR estimates with a confidence level higher than 99%. This study picks up the right tail and left tail of the return distribution and estimates the EVT-VAR for each, which reflects the asymmetry of the return distribution of the Korean Stock market.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.3
• /
• pp.388-393
• /
• 2000

Cleft lip and palate is one of the most common congenital defects in oro-maxillo-facial region. Because most patients undergo surgical repair in early life, the sagittal jaw relationships used to be deteriorated gradually from palate surgery up to adulthood. Also, the maxillary lateral incisor may be absent or atypical-shaped in the cleft site and may not erupt or erupt ectopically, so multidisciplinary dental cares are needed for cleft lip and palate patients. The effects of the cleft lip and alveolus seem to be limited to that part of the dentofacial complex that surrounds the cleft area. In the maxillary arch, the anterior part of the non cleft segment has a tendency to be rotated forward. On the other hand, the cleft segment has a tendency to rotated slightly medially ; hence, the tendency for canines to be edge-to-edge and sometimes in crossbite. Lip and alveolus surgery adequetely correct these problems, with little untoward effect on the skeletal maxillary-mandible relationships. In this report, the patient has a repaired lip and cleft alveolus on the left side with congenital missing on '62, '22, oronasal fistula, and skeletal class III malocclusion which is not affected by lip surgery. Dental treatments for this patient including orthodontic(space supervision, functional regulator in mixed dentition, fixed therapy in permanent dentition) and prosthodontic(removable obturator with key and keyway attachment and Konus crown) therapy were performed to improve the patient's functions and esthetics.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.39
• /
• pp.16.1-16.6
• /
• 2017

Background: Mandibular reconstruction is performed after segmental mandibulectomy, and precise repositioning of the condylar head in the temporomandibular fossa is essential for maintaining preoperative occlusion. Methods: In cases without involvement of soft tissue around the mandibular bone, the autopolymer resin in a soft state is pressed against the lower border of the mandible and buccal and lingual sides of the 3D model on the excised side. After hardening, it is shaved with a carbide bar to make the proximal and distal parts parallel to the resected surface in order to determine the direction of mandibular resection. On the other hand, in cases that require resection of soft tissue around the mandible such as cases of a malignant tumor, right and left mandibular rami of the 3D model are connected with the autopolymer resin to keep the preoperative position between proximal and distal segments before surgical simulation. The device is made to fit the lower border of the anterior mandible and the posterior border of the mandibular ramus. The device has a U-shaped handle so that adaptation of the device will not interfere with the soft tissue to be removed and has holes to be fixed on the mandible with screws. Results: We successfully performed the planned accurate segmental mandibulectomy and the precise repositioning of the condylar head by the device. Conclusions: The present technique and device that we developed proved to be simple and useful for restoring the preoperative condylar head positioning in the temporomandibular fossa and the precise resection of the mandible.

• Journal of Oral Medicine and Pain
• /
• v.30 no.1
• /
• pp.121-129
• /
• 2005

In this experiment, eleven volunteers were followed up for 15 months after the injection of botulinum toxin type A on right and left masseter muscles. The measurement of masseter muscle atrophy for each volunteer was performed by CT(computed tomography) three times: before the injection, three and fifteen months after the injection. The thickness and area of muscle were measured in three positions which are 10 (position 1), 20 (position 2), and 40 mm (position 3) above the inferior border of mandible(the injection site was nearest the position 1). The thickness of masster muscle was decreased in all three positions three months after the injection, but no significant change was observed fifteen months after the injection. On the other hand, the area of masster muscle was decreased in all three positions three months after the injection. Furthermore, the area was decreased significantly in positions 1 and 2, but not in position 3 fifteen months after the injection. As a result, toxin is still in effect even fifteen months after the injection. Finally, the present study shows that the measurement of muscle area provides more precise informations than that of muscle thickness does.