• Journal of Ocean Engineering and Technology
• /
• v.23 no.6
• /
• pp.87-92
• /
• 2009

The effect of aging on the precipitation of the $\sigma$ phase and the corrosion resistance in tungsten substituted super duplex stainless steels was investigated. The volume fraction of the $\sigma$ phase and the current density increased with aging at temperatures up to $750^{\circ}C$ and then decreased. With an increase in aging time, the volume fraction of the $\sigma$ phase and the current density also increased. The $\sigma$ phase hardly influenced the corrosion resistance. With the substitution of tungsten for molybdenum in super duplex stainless steel, the volume fraction of the $\sigma$ phase and the current density decreased remarkably.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1222-1225
• /
• 2004

This paper presents multibit Sigma-Delta ADC using noise-shaped dynamic element matching(DEM). 5-bit flash ADC for multibit quantization in Sigma Delta modulator offers the following advantages such as lower quantization noise, more accurate white-noise level and more stability over single quantization. For the feedback paths consisting of DAC, the DAC element should have a high matching requirement in order to maintain the linearity performance which can be obtained by the modulator with a multibit quantizer. The DEM algorithm is implemented in such a way as to minimize additional delay within the feedback loop of the modulator Using this algorithm, distortion spectra from DAC linearity errors are shaped. Sigma Delta ADC achieves 82dB signal to noise ratio over 615H7z bandwidth, and 62mW power dissipation at a sampling frequency of 19.6MHz. This Sigma Delta ADC is designed to use 0.25um CMOS technology with 2.5V supply voltage and verified by HSPICE simulation.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.959-964
• /
• 2010

In this work, equilibrium molecular dynamics (MD) simulations in a microcanonical ensemble are performed to evaluate the friction coefficient of a Brownian particle (BP) in a Lennard-Jones (LJ) solvent. The friction coefficients are determined from the time dependent friction coefficients and the momentum autocorrelation functions of the BP with its infinite mass at various ratios of LJ size parameters of the BP and solvent, ${\sigma}_B/{\sigma}_s$. The determination of the friction coefficients from the decay rates of the momentum autocorrelation functions and from the slopes of the time dependent friction coefficients is difficult due to the fast decay rates of the correlation functions in the momentum-conserved MD simulation and due to the scaling of the slope as 1/N (N: the number of the solvent particle), respectively. On the other hand, the friction coefficient can be determined correctly from the time dependent friction coefficient by measuring the extrapolation of its long time decay to t=0 and also from the decay rate of the momentum autocorrelation function, which is obtained by time integration of the time dependent friction coefficient. It is found that while the friction coefficient increases quadratically with the ratio of ${\sigma}_B/{\sigma}_s$ for all ${\sigma}_B$, for a given ${\sigma}_s$ the friction coefficient increases linearly with ${\sigma}_B$.

• Atmosphere
• /
• v.25 no.1
• /
• pp.185-191
• /
• 2015

Ambient measurements of aerosol light absorption (${\sigma}_a$) and scattering coefficients (${\sigma}_s$) were done at Gosan climate observatory during summer 2008 using a 3-wavelength photoacoustic soot spectrometer (PASS). PASS was deployed photoacoustic method for light absorption and integrated nephelometry for light scattering measurements. The ${\sigma}_a$ and ${\sigma}_s$ from PASS were compared with those from co-located aethalometer and nephelometer measurements. The aethalometer measurements of ${\sigma}_a$ correlated reasonably well with photoacoustic measurements, but the slope of the linear fitting line indicated the PASS measurement values of ${\sigma}_a$ were larger by a factor of 1.53. The nephelometer measurement values of ${\sigma}_s$ correlated very well with PASS measurements of ${\sigma}_s$, with a slope of 1.12 and a small offset. Comparing to the aethalometer measurements, the photoacoustic measurements of ${\sigma}_a$ didn't exhibit a significant (i.e., the ratio between aethalometer and PASS increased) change with increasing relative humidity (RH). The ratio of ${\sigma}_s$ between nephelometer and PASS increased with increasing RH, especially when the RH increased beyond 80%. This apparent increase in ${\sigma}_s$ with RH may be due to the contribution of hygroscopic growth of aerosols.

• Journal of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.195-204
• /
• 1982

Semi-empirical MO calculations, EHT, CNDO/2, MINDO/3, and MNDO met hods, were performed on various geometries of n-butane, n-alkyl radical and tetramethylene diracal (triplet) in order to compare eigenvalue and eigenvector properties with those obtained by STO-3G method. All methods predicted the same relative order of stabilities of various geometries for n-butane; geometrical preferences were found to be dominated by one-electron factor, ${\pi}$-orbital energy changes being more impotant in the semi-empirical methods. The hyperconjugative energy changes accompanying structural changes from $(n-{\sigma}{\ast})_{trans}$ to (n-{\sigma}{\ast})cis were underestimated in the EHT, CNDO/2 and MINDO/3, whereas those were overestimated in the MNDO. The net destabilizing effect of $(n-{\sigma}{\ast})_{trans}$ structure was mainly due to the large internuclear energy involved in the structure. Through-space interaction between $n_1$ and $n_2$ orbitals of diradical caused energy gap narrowing of ${\Delta}E_{sp}$ and ${\Delta}{\varepsilon}={\varepsilon}_0$-${\varepsilon}_{av}$; through-space interaction had opposing effect to that of through-bond interaction. Due to the less severe neglect of differential overlaps in the MNDO, this energy gap narrowing effect appeared amplified in the MNDO. In general orbital properties were found to be reproduced satisfactorily, but eigenvalue properties were not, in all the semi-empirical methods especially when ${\sigma}-{\sigma}{\ast}$ and n-$n-{\sigma}{\ast}$interactions were involved.

• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.135-148
• /
• 2005

This paper considers a six sigma project for reducing the project costs through project risk management. The project follows a disciplined process of five phases: define, measure, analyze, improve, and control. A risk management process map is used to identify process input and output variables. Seven key process input variables are selected by using C&E diagram and X-Y matrix and finally four vital few input variables are selected by the related statistical analysis. The optimum alternatives of the vital few input variables are obtained by the method of PUGH matrix. The process is running on control plan and we obtained substantial project cost reductions in early stage of the control phase.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.12
• /
• pp.71-79
• /
• 2010

The reliable evaluation of the coefficient of variation (COV) of soil properties is required for the determination of adequate design values and the application of a probabilistic method for the design of geotechnical structures. In this paper, the applicability of methods for estimating the standard deviation, such as the. Three-Sigma Rule and a statistical method, is evaluated by using site investigation data of the Songdo area. It is found that the Three-Sigma Rule provides similar results to those of a statistical method when using $N_{\sigma}$=6 for the property with small variability and $N_{\sigma}$=4.2~5.3 for the property with large variability. It is also observed that, for the undrained shear strength that has an increasing trend with depth, a $N_{\sigma}$ value of 4 is adequate for the evaluation of the variability by the Three-Sigma Rule. The COVs of soil properties determined in this paper could be used in the estimation of the confidence interval and characteristic values of soil properties.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.195-196
• /
• 2012

This paper describes combustion tuning methodology of double-swirl gas turbine combustor using six sigma tools. This methodology is consist of five steps-Define, Identify, Design, Optimize and Verify (DIDOV). First, the NOx reduction target was defined in the step design; second, the current status of the plant was diagnosed in the step of identify; third, the vital few control parameters to achieve the defined target were determined by analyzing the correlation between the control parameters and NOx emissions in the step of design; fourth, the optimum condition was derived from one of the six sigma tools in the step of optimize; finally, the optimum condition was verified by applying the condition to the gas turbine combustor in the step of verify. As a result of the suggested method, averaged NOx emissions were reduced by more than 70% and the standard deviation was improved by more than 60%. Thus, this methodology can be attributed to the efficient reduction of NOx emission with saving combustion tuning time.

• Journal of Korean Society for Quality Management
• /
• v.33 no.1
• /
• pp.32-41
• /
• 2005

This paper presents a six sigma application case study for an automobile steering wheel manufacturing process using rolled throughput yield improvement activity. Hidden factory and first pass yield concept is introduced and a DMAIC procedure is implemented to maximize the first pass yield. The result of the six sigma project amounts to the reduction of failure cost of 1.2 billion won per year in the steering wheel manufacturing process. This paper can benefit six sigma practitioners in some ways.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.1
• /
• pp.124-131
• /
• 2008

Goal of "Single PPM Quality Innovation Movement" is to achieve perfect quality through participation of all members in the production line to achieve zero defects. Six Sigma has been used by many leading corporations as a tool for Management Innovation. Recently, the number of small and medium sized companies implementing Six Sigma has increased. Therefore, this research introduces the case of "S" company which utilized Six Sigma and Single PPM together to effectively implement Single PPM Quality Innovation Movement. This paper describes issues identified during the Single PPM Quality Innovation Movement implementation and also suggests improvement plans.