• Journal of Labour Economics
• /
• v.41 no.4
• /
• pp.107-131
• /
• 2018

This paper presents a model for the Minimum Wage Commission's decision process and analyzes the strategic actions of the participants in the process. The Minimum Wage Commission has used two ways of setting the minimum wage. The commission has voted either on the labor's against the management' final proposals or has voted on the public interest commissioners' proposal. According to the model, the minimum wage is determined at a level that is very close to or at a level preferred by the median voter among the public interest commissioners. But the probability of adopting labor or management proposal is ex-ante the same. Empirical evidence from the minimum wage decision process is consistent with the predictions of the model. The probability of adopting the labor's proposal in the minimum wage commission voting is not statistically significantly different from 50%. The model also suggests that the preference of the median voter among public interest commissioners determines the minimum wage level. Since the government appoints public interest commissioners and thus, in fact, the median voters, the government can decide the minimum wage level. This proposition is also consistent with data. The annual growth rate of the minimum wage under the progressive governments is higher than under conservative governments.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.802-812
• /
• 2019

With the rapid development in the field of unmanned aerial vehicles(UAVs) and drones, higher request to development of a surveillance system for a drone is putting forward. Since surveillance systems with fixed cameras have a limited range, a development of surveillance systems with a moving camera applicable to PTZ(Pan-Tilt-Zoom) cameras is required. Selecting the features for object plays a critical role in tracking, and the object has to be represented by their shapes or appearances. Considering these conditions, in this paper, an object tracking method with optical flow is introduced to track a tiny drone with a moving camera. In addition, a tracking method combined with kalman filter is proposed to track continuously even when tracking is failed. Experiments are tested on sequences which have a target from the minimal 12 pixels to the maximal 56337 pixels, the proposed method achieves average precision of 175% improvement. Also, experimental results show the proposed method tracks a target which has a size of 12pixels.

• Resources Recycling
• /
• v.27 no.6
• /
• pp.11-22
• /
• 2018

Magnetic separators has been used in the mining and the recycling fields in general, and is still applied in wide variety of fields. It is classified into the equipments for separating coarse ferrous scrap from non-ferrous materials and the equipments for concentrating fine ferromagnetic particles below 3mm. Magnetic separation equipments for concentrating fine materials also falls into two categories of low intensity and high intensity magnetic separators. The former is used for ferromagnetic materials but also paramagnetic materials of high magnetic susceptibility, and the latter for paramagnetic materials of lower magnetic susceptibility. Both low and high intensity magnetic separators could be utilized either dry and wet. Recently, the High gradient magnetic separators(HGMS) used in the range of less than 0.7 tesla has been gradually replaced by the magnetic separator made of rare earth permanent magnets commercialized in the 1980s. In addition, the expansion of nanotechnology in terms of synthetic magnetic materials in the environmental and biological fields is expected to contribute positively to the development of magnetic separation technology.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1050-1057
• /
• 2020

Immersive 360-degree media has a problem of slowing down the video recognition speed when the video is processed by the conventional method using a variety of rendering methods, and the video size becomes larger with higher quality and extra-large volume than the existing video. In addition, in most cases, only one scene is captured by fixing the camera in a specific place due to the characteristics of the immersive 360-degree media, it is not necessary to extract feature information from all scenes. In this paper, we propose a reference frame selection method for immersive 360-degree media and describe its application process to copyright protection technology. In the proposed method, three pre-processing processes such as frame extraction of immersive 360 media, frame downsizing, and spherical form rendering are performed. In the rendering process, the video is divided into 16 frames and captured. In the central part where there is much object information, an object is extracted using an RGB vector per pixel and deep learning, and a reference frame is selected using object feature information.

• Journal of Marine Bioscience and Biotechnology
• /
• v.9 no.1
• /
• pp.14-21
• /
• 2017

The purpose of this study was to inhibit biofouling on a selectively permeable membrane (SPM) and increase biomass productivity in marine photobioreactors (PBRs) for microalgal cultivation by chemical treatment. Surfaces of a SPM, composed of polyethylene terephthalate (PET), was sulfonated to decrease hydrophobicity through attaching negatively charged sulfonic groups. Reaction time of sulfonation was varied from 0 min to 60 min. As the reaction time increased, the water contact angle value of SPM surface was decreased from $75.5^{\circ}$ to $44.5^{\circ}$, indicating decrease of surface hydrophobicity. Furthermore, the water permeability of sulfonated SPM was increased from $5.42mL/m^2/s$ to $10.58mL/m^2/s$, which reflects higher nutrients transfer rates through the membranes, due to decreased hydrophobicity. When cultivating Tetraselmis sp. using 100-mL floating PBRs with sulfonated SPMs, biomass productivity was improved by 34% compared with the control group (non-reacted SPMs). In addition, scanning electron microscopic observation of SPMs used for cultivation clearly revealed lower degree of cell attachment on the sulfonated SPMs. These results suggest that sulfornation of a PET SPM could improve microalgal biomass productivity by increasing nutrients transfer rates and inhibiting biofouling by algal cells.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.3
• /
• pp.149-158
• /
• 2013

The purpose of this study was to evaluate the shape and impacted pattern of mesiodens and associated complications using three dimensional images produced by dental CBCT. This study was based on the CBCT (CB Mercury, Hitachi, Tokyo, Japan) radiographic view of 280 pediatric patients who visited the Department of Pediatric Dentistry at the Chosun University Dental Hospital with the chief complain of mesiodens during between 2007 and 2012. Impacted mesiodens occurs more frequently in boys than in girls, the ratio being approximately 3.3:1 and most cases were observed between 6 and 8 years of age. The number of mesiodens per patient was 1.38. Majority of the mesiodens were conical (79.5%) in shape and inverted (48.6%) in direction. The mesio-distal position of mesiodens were the most common in middle sector (81.8%), vertical level were the most common near cervical (60.3%), and labio-palatal position were the most common at palatal side of the dental arch (73.8%). 47.5% of mesiodens had complications and common complications associated with mesiodens were displaced tooth and delayed eruptions. The shape, vertical level, and labio-palatal position of mesiodens had correlations with complications. CBCT appears to be an excellent diagnostic tool, providing three dimensional information and accurate images, for diagnosis of impacted mesiodens.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.3
• /
• pp.247-256
• /
• 2014

The purpose of this study was to determine the prevalence of non-nutritive sucking in preschool children in Daejeon. This study assessed the relationship between contributing factors influencing the prevalence of non-nutritive sucking. Also, the effects of non-nutritive sucking on the primary dentition were investigated. The study included 841 children 18~65 months of age that visited a pediatric private dental clinic for oral examination. Both children and their guardians were surveyed. It was found that 32.8% of children exhibited non-nutritive sucking, and 37.7% of females displayed this behavior. The number of females showing this behavior was significantly greater than that of males. The prevalence decreased significantly with the breast-feeding period, and there was no association with either birth rank or maternal occupation. Finger sucking (62.6%) was more prevalent and of longer duration than pacifier sucking (37.4%). Malocclusion of the primary dentition was associated with the duration of this behavior.

• Journal of Broadcast Engineering
• /
• v.20 no.1
• /
• pp.140-152
• /
• 2015

HCI(Human Computer Interaction) enables the interaction between people and computers by using a human-familiar interface called as Modality. Recently, to provide an optimal interface according to various devices and service environment, an advanced HCI method using multiple modalities is intensively studied. However, the multimodal interface has difficulties that modalities have different data formats and are hard to be cooperated efficiently. To solve this problem, a multimodal communicator is introduced, which is based on EMMA(Extensible Multimodal Annotation Markup language) and MMI(Multimodal Interaction Framework) of W3C(World Wide Web Consortium) standards. This standard based framework consisting of modality component, interaction manager, and presentation component makes multiple modalities interoperable and provides a wide expansion capability for other modalities. Experimental results show that the multimodal communicator is facilitated by using multiple modalities of eye tracking and gesture recognition for a map browsing scenario.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.5
• /
• pp.71-76
• /
• 2008

The purposes of this study were to examine the coping behavior of the elderly in the warning phase of disaster and to explore factors influencing the coping behavior of the elderly. Data were collected from 130 senior citizens aged over 60 who are residing in Pyungchang and Injae of Kangwon province which had damaged by flood disaster in 2006. Perry & Lindell (1997)'s index, a series of six categories that represent coping behaviors which progressively approximate the action of evacuating in the warning phase of disasters was used. Results showed that respondents have high coping skills. Although Activities of Daily Living (ADL) has positive influence on the coping behavior, length of residence has negative effect on the coping behavior of the elderly. This finding proves the elderly are not uncompliant or uncooperative population in the warning phase of disaster. This result also emphasizes the importance of rapid and accurate giving of public warning system of disaster and necessity of prior notification of useful information about natural disaster and effective evacuation plan for the elderly.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.529-535
• /
• 2020

As the main technology of the 4th industrial revolution, immersive 360-degree video contents are drawing attention. The market size of immersive 360-degree video contents worldwide is projected to increase from $6.7 billion in 2018 to approximately $70 billion in 2020. However, most of the immersive 360-degree video contents are distributed through illegal distribution networks such as Webhard and Torrent, and the damage caused by illegal reproduction is increasing. Existing 2D video industry uses copyright filtering technology to prevent such illegal distribution. The technical difficulties dealing with immersive 360-degree videos arise in that they require ultra-high quality pictures and have the characteristics containing images captured by two or more cameras merged in one image, which results in the creation of distortion regions. There are also technical limitations such as an increase in the amount of feature point data due to the ultra-high definition and the processing speed requirement. These consideration makes it difficult to use the same 2D filtering technology for 360-degree videos. To solve this problem, this paper suggests a feature point extraction and identification technique that select object identification areas excluding regions with severe distortion, recognize objects using deep learning technology in the identification areas, extract feature points using the identified object information. Compared with the previously proposed method of extracting feature points using stitching area for immersive contents, the proposed technique shows excellent performance gain.