• Clean Technology
• /
• v.11 no.2
• /
• pp.83-90
• /
• 2005

This paper is about a new method of synthesis organic tanning agent (polymer, polyphenol, polyresin) and discusses their tanning property. It was found that properties of the leather manufactured with application of organic tanning agent were similar to those applied with conventional chrome tanning agent and reducing effects of Cr, T-N, COD, SS concentrations in the effluent.

• Clean Technology
• /
• v.11 no.1
• /
• pp.51-56
• /
• 2005

In this paper we prepared dextrin dialdehyde (DAS) of a different oxidation ratio (aldehyde content) and examined their properties and discussed their tanning mechanism. DAS was produced by reacting dextrin in aqueous medium with periodate ion used in a molar ratio between periodate and glucose of 0.3 to 1.0 at a temperature of 20 to $45^{\circ}C$. Since DAS reacts with amino group, DAS may have tanning property of aldehyde tanning agent (formaldehyde, glutaraldehyde).

• Clean Technology
• /
• v.10 no.1
• /
• pp.27-35
• /
• 2004

Domestic leather company is working hard to solve present environmental problem. Leather industry is realized by representative pollution industry. An advanced nation is trying to develop clean technology by collaborating research institute with the chemical company, and tannery. This research introduced information that is gained through technical transfer in leather processing. This project started to solve environmental problem of leather industry. Specially the environment and economic problem is caused from chrome which exists in the waste water or solid waste. Representative technologies, reduced chrome tanning, non-chrome tanning method, are being introduced through transfer. Also lightweight leather development advances the research which uses non-metal tanning agent.

• Journal of the Korean Society of Costume
• /
• v.58 no.8
• /
• pp.63-73
• /
• 2008

From the ancient Korea to the late Joseon Korean fur and leather had been preferred in and out of Korea for their good quality and excellent manufacturing skill. Since Unified Silla (A.D.676${\sim}$A.D.936) Korean fur and leather were manufactured divisionally by workmen specialized in materials and products, and such manufacturing process was succeeded to Goryeo and Joseon. Manufacturing of fur and leather was consisted of as follows: hunting and butchering - peeling - beating with a paddle and removing fat - oil manufacturing - drying - tanning, then cutting and sewing, and there was a special caring method. In order to make good fur and leather, each process of manufacturing needed particular techniques and all available methods were tried to have tender fur and leather by using smoking, excrement, lime, vegetable tannin and even cerebral liquid. And also required mouth-chewing and hand-pounding with a lot of time and of labor Keeping furs resilience and flexibility, sowing several skins together, even when the after-all-process skin was converted into clothes, was much more difficult than sewing fabric. Thus, the manufacturing cost was as much expensive as skin materials, and the volume of manufacturing of fur and leather was also limited. Therefore, fur and leather must have been popular for scarcity value in the manufacturing process, and this scarcity must have caused an extreme luxury of fur.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.131-137
• /
• 2007

Industrial wastewater management guideline and evaluation model of Best Available Technologies for the leather tanning and finishing industry was developed as an economical evaluation model using evaluation of BAT including economical evaluation combined with cost analysis model and cost annualization model in considering of economical factors and non-water environmental factors. It was verified that approximately 10% will be increased annually to modify conventional treatment process ($3,700m^3/d$) of J leather wastewater treatment plant to advanced process of K leather wastewater treatment plant.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.4
• /
• pp.100-106
• /
• 2007

In this paper, first we went through the deliming and degreasing as pre-treatment of limed pelt scrap which is derived from liming process during leather manufacturing processing. After that, we produced fine collagen using non-chrome tanning and heat treatment and using acryl monomer graft polymerization such as GMA and MMA. From the comparisonof final products made by various methods, they showed good features in pyrolysis temperature, heat-resisting, variation of moisture content and particle distribution.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.51-58
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for leather tanning and finishing industry. For the evaluation BAT, a subcategorization for the industry considering wastewater characteristics, source equipments, raw material and so on should be suggested. Three subcategories: A) Unharing, Chrome Tan, Retan-Wet Finish, B) Chrome Tan, Retan-Wet Finish, and C) Furskins were proposed in this study. Wastewater discharged from the each category contains high concentration of COD, chrome, nitrogen and sulfide. In particular, the concentration of nitrogen from the subcategory A is significantly greater. Twenty sites were surveyed and wastewater qualities were analyzed. Therefore, six different technologies were applied to the subcategory A for the end-of-pipe treatment technology, and a technology was used in the subcategory B and C, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options for each subcategories: A) primary chemical precipitation + modified Ludzack-Ettinger process (MLE) + secondary chemical precipitation, B) chemical precipitation + typical activated-sludge process + Fenton oxidation, C) chemical precipitation + typical activated-sludge process + batch Fenton oxidation or batch activated carbon treatment were selected as the BAT, respectively.

• Journal of Fashion Business
• /
• v.26 no.5
• /
• pp.122-134
• /
• 2022

This study is conducted on hardening leather with improved firmness and stability of shape, based on research on types and thickness of leather. The purpose of this study is to test the physical properties of the leather for molding to prepare the foundation for leather molding based on the test results using four methods by thickness of Vegetable and Split. The tests were conducted using a total of five leather types, including three types of vegetable leathers and two types of split, by thickness. Based on the testing method for leathers in KS M 6882, the tests were performed at 27℃ with relative humidity of 65±20%. The samples were prepared with cowhide, size 9cm× 2cm. The measurement parameters are length and width. thickness, volume, mass, density. Regarding the hardening treatment method, changes in appearance and major physical characteristics of leather were reviewed by soaking in hot water, dry heating, hammering, waxing, and olive oil coating. The study results are as follows. In planar works, it is judged that hardening work using a hammer is more suitable for stiffness or density in order to prevent easy breakage with adult muscle density, rather than boiling water or baking. In conclusion, there is no curling, soot, or breaking phenomenon, and the densest curing method is 50℃ for 20 sec of V2 and 75℃ for 60 sec of V2 in boiling water. The combination of paraffin treatment improve waterproof and quality.

• Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.257-261
• /
• 2001

Leather (skin & hide) is a body organ, comprising 3 to 5% of the animals weight. The cross-section of a leather is composed of two major divisions: the epidermis or grain layer and the corium or split layer. The leather is naturally covered with bacteria and fungi, because it is a particularly rich source of a wide variety of microorganisms. Stains or coatings of different colours occur in patches or over large areas, depending on the type of mould spore infestation. We examined the antibiotic effect of leather after washing. Upon applying equal fungicide, antibiotic effects increased as follows: grain layer>middle layer>flesh layer. Antibiotic effect decreased with increasing frequency of washing. Decrease in antibiotic effect was lower in OITZ fungicide than in TCMTB and CMK fungicides. Sulfated fatliquor showed higher antibiotic effect than phosphated fatliquor.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.219-228
• /
• 2001

Objective : For the purpose of preparing the fundamental data and health promotion and control program on organic solvents in air of manufacturing industry. Methods : The author surveyed number of organic solvent components which was used in working site and also determined the organic solvents concentration in air of 927 manufacturing industries and 1,267 working process with gas chromatography(NIOSH manual) for five years from 1995 to 1999. Results : Mean number of solvents components by type of industry, working process was number of 12. There were exceeded to TLV of 1,2-dichloroethane in textile manufacturing industry N,N-dimethyl furan in tanning and dressing of leather ; luggage, handbags, saddlery, harness and footwear manufacturing industry and chemical and chemical product manufacturing industry by type of industry. There were exceeded to TLV of 1,2-dichloroethane in handwriting and drawing process, cellosolve in adhesive spreading process, N,N-dimethly furan in production of solvent process and adhesion process by working process Total exceeded rate to threshold limit values of organic solvents mixture were 12.9% for EI(Exposure index) and 10.0% for Em(Estimation of mixture) by type of industry, 11.3% for EI and 8.2% for Em by type of working process. The highest exceed rate was 36.7% for EI in tanning and dressing of leather ; luggage handbags, saddlery, harness and footwear manufacturing industry and 29.0% for Em in textile manufacturing industry. The highest exceeded rate was 23.1% for EI and 12.5% for Em in adhesive spreading process by working process. Mean values of total subjects by type of industry and type of working process were $0.7{\pm}1.8$ for EI and $0.7{\pm}1.7$ for Em respectively. Conclusions : As above results, the author suggest that it makes the environmental control program on 1.2-dichloroethane, N,N-dimethyl furan, cellosolve by kind of organic solvent and on textile manufacturing industry, tanning and dressing of leather ; luggage, handbags, saddlery harness and footwear manufacturing industry by type of industry, and on handwriting, drawing process and adhesive spreading process and adhesion process by type of working process.