• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.16-21
• /
• 2008

In order to protect the environment from the refrigerant pollution, the $CO_2$ may be regarded as one of the most attractive alternative refrigerants for an automotive air-conditioning system. Control methods for a $CO_2$ system should be different because of $CO_2$'s unique properties as a refrigerant. Especially, the high-side pressure of a $CO_2$ system should be controlled for the effective operation of the system. High-side pressure algorithms, which were composed of the pressure setpoint algorithm and the pressure setpoint reset algorithm, were developed. Pressure setpoint algorithms, by using a neural network and by using a least square method, were developed and compared. Pressure setpoint reset algorithms, by using a fuzzy logic and by using a proportional logic, were also developed and compared. Simulation results showed that a least square method was more useful than a neural network for the pressure setpoint algorithm. And a proportional logic was more practical than a fuzzy logic for the pressure setpoint reset algorithm.

• Journal of Electrical Engineering and Technology
• /
• 제6권4호
• /
• pp.459-465
• /
• 2011

A phasor estimation algorithm based on the least square curve fitting technique for the distorted secondary current due to current transformer (CT) saturation is proposed. The mathematical form of the secondary current during CT saturation is represented as the scaled primary current with magnetizing current. The information on the scaled primary current is estimated using the least square technique, with the measured secondary current in the saturated section. The proposed method can estimate the phasor of a fundamental frequency component during the saturated period. The performance of the algorithm is validated under various fault and CT conditions using a C400 CT model. A series of performance evaluations shows that the proposed phasor estimation algorithm can estimate the phasor of the fundamental frequency component with high accuracy, regardless of fault conditions and CT characteristics.

• 전기학회논문지
• /
• 제56권4호
• /
• pp.645-650
• /
• 2007

This paper proposes a parameter estimation technique of a power transformer. Based on the combined equation, it estimates separately the primary and secondary leakage inductances using the least square method from the instantaneous voltages and currents in the steady state. The performance of the proposed technique was investigated by varying the cut-off frequency of the filter and the number of samples per cycle. The estimated values are obtained based on the average value for 41 cycle.

• International Journal of Aerospace System Engineering
• /
• 제7권1호
• /
• pp.21-27
• /
• 2020

Quasi steady stall is a phenomenon to characterize the aerodynamic behavior of aircraft at high angle of attack region. Generally, it is exercised from a steady state level flight to stall and its recovery to the initial flight in a calm weather. For a theoretical study, such maneuver is demonstrated in the form of aerodynamic model which consists of aircraft's stability and control derivatives. The current research paper is focused on the appropriate selection of aerodynamic model for the maneuver and estimation of the unknown model coefficients using least-square method. The statistical accuracy of the estimated parameters is presented in terms of standard deviations. Finally, the validation has been presented by comparing the measured data to the simulated data from different models.

• 한국항공운항학회지
• /
• 제21권2호
• /
• pp.33-39
• /
• 2013

Multilateration(MLAT) may complement secondary surveillance radar and also act as a real-time backup for the ADS-B system. This System is using time difference of arrival (TDOA) and based on triangulation principle. Each TDOA measurement defines a hyperbola describing possible aircraft locations. The accuracy in MLAT system depends on the positional relationship of the receiver and aircraft. There are various algorithms to localize aircraft based on TOA estimation. In this paper, we use least square method and extended Kalman filter and compare their results. Study results show that the extend Kalman filter provides a better performance than the least square method.

• Management Science and Financial Engineering
• /
• 제14권2호
• /
• pp.89-104
• /
• 2008

Growth curves including Bass, Logistic and Gompertz functions are widely used in forecasting the market demand. Nonlinear least square method is often adopted for estimating the model parameters but it is difficult to set up the starting value for each parameter. If a wrong starting point is selected, the result may lead to erroneous forecasts. This paper proposes a method of selecting starting values for model parameters in estimating some growth curves by nonlinear least square method through grid search and transformation into linear regression model. Resealing the market data using the national economic index makes it possible to figure out the range of parameters and to utilize the grid search method. Application to some real data is also included, where the performance of our method is demonstrated.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.190-192
• /
• 2008

This paper shows the formulation of fast moving least square reproducing kernel method (FMLSRKM) which is a kind of meshfree methods. FMLSRKM has some advantages compared to conventional numerical techniques such as finite element method. For simple analysis on a rectangular waveguide, point collocation scheme is introduced and applied.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.410-413
• /
• 2009

웨이퍼 Pre-Alignment는 반도체 공정에서 장비에 웨이퍼를 놓기 전에 웨이퍼의 중심 및 방향을 정확하게 정렬할 필요가 있는데, 이를 위해서 일정한 수준 이하로 중심과 방향을 찾아 Alignment 하는 방법을 말한다. 본 논문에서는 웨이퍼를 Alignment 하기 위해 기존의 Mechanical한 방법이 아닌 Area 카메라를 통한 비접촉식 방법을 이용하였다. 이 방법은 웨이퍼를 45도씩 8번씩, 한 바퀴를 회전하여 이미지를 획득한 뒤, 이미지의 웨이퍼의 에지값 들을 이용하여 Least Square Circle Fitting을 이용하여 웨이퍼의 중심과 방향을 정확하게 측정하여 Alignment를 한다.

• Journal of the Korean Data and Information Science Society
• /
• 제7권2호
• /
• pp.263-272
• /
• 1996

임의의 기계에 대한 수명의 분포는 와이블분포를 하는 경우가 흔하다. 그리고 현실적으로 기계의 수명시간을 검정할 때, 시험시간및 여러 환경적인 제약에 의하여 표본으로 주어진 기계의 수명을 모두 관측하기는 어렵다. 그래서, 본 연구에서는 임의 중단모형 하에서 와이블분포의 모수를 최소제곱법(least squares method)을 이용하여 추정하고 기존의 최대우도추정량(maximum likelihood estimates)과 효율성의 측면에서 비교하고자 한다.

• Journal of the Korean Data and Information Science Society
• /
• 제25권5호
• /
• pp.1151-1160
• /
• 2014

In DNA microarray studies, the number of genes far exceeds the number of samples and the gene expression measures are highly correlated. Partial least squares regression (PLSR) is one of the popular methods for dimensional reduction and known to be useful for the classifications of microarray data by several studies. In this study, we suggest a modified version of the partial least squares regression to analyze gene expression data with survival information. The method is designed as a new gene selection method using PLSR with an iterative procedure of imputing censored survival time. Mean square error of prediction criterion is used to determine the dimension of the model. To visualize the data, plot for variables superimposed with samples are used. The method is applied to two microarray data sets, both containing survival time. The results show that the proposed method works well for interpreting gene expression microarray data.