• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5A
• /
• pp.459-468
• /
• 2006

Current routing in sensor networks focuses on finding methods for energy-efficient route setup and reliable relaying of data from the sensors to the sink so that the lifetime of the network is maximized. The existing routing protocols do not have routing tables to determine a path when packets are transferred. A sensor network by a routing table increases a cost of maintaining and updating a path, because sensor nodes have characteristics to be mobile and constrained capacity and resources. This paper proposes a new routing algorithm by broadcasting a bitmap in order to reduce the number of messages transferred when routing paths are established. Each node has a routing table with a bitmap, which contains link information. A bitmap is formed two-dimensional array, which consists of each row and column represented with a bit. The node only updates its own bitmap if it receives a bitmap from another adjacent nodes after the broadcasting. There by, each node has a bitmap with partial links information not total links information on the network. The proposed routing algorithm reduces the number of messages for routing establishment at least 10% compared with the previous algorithms.

• Journal of the Korean Geographical Society
• /
• v.28 no.3
• /
• pp.227-246
• /
• 1993

Gender differences in the seperation of emplo-yment from home and commuting patterns of the Seoul Area are examined in this paper. Throughout the analysis, it is found that there exist a substantial gender variation in comm-uting rates. Even though the regional variation of commuting rates of male workers is very small, the female workers' regional variation of commuting rates is substantial. Especially, the area around the traditional central place of Kangbuk, the area near the Youngdungpo and Kuro where manufacturing and retailing activities are concentrated, and the area where low-income families are concentrated show high rate of female commuting. In contrast, the traditional residential area, especially the high-income area of Kangnam, shows lower rate of female commuting. Generally, female workers tend to work closer to home than male workers. Accordingly, the job search range of female workers is smaller than that of mle workers. But the areal unit of job search range of female workers is wider at least than Dong. The fact that female workers' job search area is smaller than male workers' implies that the job opportunity around the home location could have more impacts on female workers' job search process than male workers' job search process. There is a substantial difference in commuting behavior between male and female workers. In general, male workers commute longer, use more expensive transportation mode, and pay higher transportation cost in comparision with female workers. These gender differences in commuting behavior could be resulted not only form the gender difference in the seperation of employment form work, but also form the gender difference in the social status in both work place and home.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.993-994
• /
• 2008

Electrochromic (EC) devices are capable of reversibly changing their optical properties upon charge injection and extraction induced by the external voltage. The characteristics of the EC device, such as low power consumption, high coloration efficiency, and memory effects under open circuit status, make them suitable for use in a variety of applications including smart windows and electronic papers. Coloration due to reduction or oxidation of redox chromophores can be used for EC devices (e-paper), but the switching time is slow (second level). Recently, with increasing demand for the low cost, lightweight flat panel display with paper-like readability (electronic paper), an EC display technology based on dye-modified $TiO_2$ nanoparticle electrode was developed. A well known organic dye molecule, viologen, was adsorbed on the surface of a mesoporous $TiO_2$ nanoparticle film to form the EC electrode. On the other hand, ZnO is a wide bandgap II-VI semiconductor which has been applied in many fields such as UV lasers, field effect transistors and transparent conductors. The bandgap of the bulk ZnO is about 3.37 eV, which is close to that of the $TiO_2$ (3.4 eV). As a traditional transparent conductor, ZnO has excellent electron transport properties, even in ZnO nanoparticle films. In the past few years, one-dimension (1D) nanostructures of ZnO have attracted extensive research interest. In particular, 1D ZnO nanowires renders much better electron transportation capability by providing a direct conduction path for electron transport and greatly reducing the number of grain boundaries. These unique advantages make ZnO nanowires a promising matrix electrode for EC dye molecule loading. ZnO nanowires grow vertically from the substrate and form a dense array (Fig. 1). The ZnO nanowires show regular hexagonal cross section and the average diameter of the ZnO nanowires is about 100 nm. The cross-section image of the ZnO nanowires array (Fig. 1) indicates that the length of the ZnO nanowires is about $6\;{\mu}m$. From one on/off cycle of the ZnO EC cell (Fig. 2). We can see that, the switching time of a ZnO nanowire electrode EC cell with an active area of $1\;{\times}\;1\;cm^2$ is 170 ms and 142 ms for coloration and bleaching, respectively. The coloration and bleaching time is faster compared to the $TiO_2$ mesoporous EC devices with both coloration and bleaching time of about 250 ms for a device with an active area of $2.5\;cm^2$. With further optimization, it is possible that the response time can reach ten(s) of millisecond, i.e. capable of displaying video. Fig. 3 shows a prototype with two different transmittance states. It can be seen that good contrast was obtained. The retention was at least a few hours for these prototypes. Being an oxide, ZnO is oxidation resistant, i.e. it is more durable for field emission cathode. ZnO nanotetropods were also applied to realize the first prototype triode field emission device, making use of scattered surface-conduction electrons for field emission (Fig. 4). The device has a high efficiency (field emitted electron to total electron ratio) of about 60%. With this high efficiency, we were able to fabricate some prototype displays (Fig. 5 showing some alphanumerical symbols). ZnO tetrapods have four legs, which guarantees that there is one leg always pointing upward, even using screen printing method to fabricate the cathode.

• The Journal of Korean Association of Computer Education
• /
• v.8 no.3
• /
• pp.43-60
• /
• 2005

Teaching computer and ICT skills in K-12 helps to bridge the digital divide of the students at the minimum cost, and provides them with a chance of getting a Quality of life as well as a Quality of work in the future. From examining the education policies of U.S., EU, Canada, and other countries, concerning computer education, several factors, including vision and national-level policy, Quality of manpower, needs for computer-related technology, structure of IT industry, overall demand for IT specialists, have been identified as those with major impacts on the curriculum of computer education. Based upon the analysis of domestic key factors, three levels of computer education program are suggested. At the most basic and least controversial level, basic ICT-skill program for effective learning needs to be provided for every student. Next level is concerned with improving the Quality of life and work. A program for introductory level of computer science can be provided as extra-curricular classes for bright and eager students, who might want to be computer expert or specialists.

• Korea Journal of Hospital Management
• /
• v.8 no.4
• /
• pp.59-75
• /
• 2003

This study was conducted to investigate the degree of utilization of outsourcing in large hospitals in Korea. We also investigated the outcome and the level of satisfaction for adopting outsourcing in these hospitals. Types of work areas that were currently operated by outsourcing and were planned to adopt outsourcing in the future were identified. A total of 83 hospitals were eligible for this study, which had more than 500 beds, and were identified from the 2003 National Hospital List published by the Korean Hospital Association. A self-administered Questionnaire survey was conducted between April 25th and May 20th in 2003 with a personnel being charged of arrangement of outsourcing in each hospital. Among the 58 hospitals responding the survey(response rate=69.9%), 49 hospitals(84.5%) utilized outsourcing in at least one work field in their organizations. The largest proportion of the hospitals(85.7%) using outsourcing responded that the biggest outcome after introducing outsourcing were cost reduction(49.0%), followed by improved efficiency in operating the organization or human resources(34.7%) and the improved quality of the work(6.1%). The degree of satisfaction for outsourcing among the hospital managers(3.43) was significantly higher than that among the employees(3.l4) on a S-point Likert-type scale(p<0.05). Among the 7 work areas, the hospitals used outsourcing most frequently in facility management(housekeeping, building maintenance, hospital security and parking management), followed by non-medical profit business(funeral, convenient store, and cafeteria), logistics(provision of patient meal, in-house delivery, and purchasing), and information and computing system(hospital information system, maintenance of personal computers and printers). The work areas that the hospitals planned to adopt or expand the outsourcing in the future most frequently were facility management, non-medical profit business, logistics, and information and computing systems. In conclusion, outsourcing was highly diffused in large Korean hospitals, particularly in the work field of facility management and non-medical profit business. The satisfaction for outsourcing was not high yet in Korean hospitals.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.3
• /
• pp.27-36
• /
• 2008

This article aims to identify the current status of outsourced production of Dongdaemun brands and to discover the consumers' perception of those outsourced products, their degree of satisfaction, and preference in purchasing those products. Moreover, the strengths and weaknesses of the outsourced products, as perceived by the consmers, have been identified, and specific methods and directions for efficient overseas outsourcing of Dongdaemun brands are suggested. This study also contains experimental works, in which I have prepared questionnaires, and my advisor have collected data. This survey was conducted on corporation managers, who directly operated clothing stores in Dongdaemun Market in December 2007. The collected data have been analyzed using SPSS 12.0 with various techniques such as t-test, paired t-test, frequency analysis and $X^2$-test. The results are summarized as the following: a) Comparison of the current outsourcing status of Dongdaemun brands showed that only eight out of the total 42 investigated companies have actually been outsourcing the production of their clothes. The biggest advantage of outsourcing was the reduced unit production cost, while low quality of products, delayed production, difficulty of control and management were shown as its disadvantages; b) the reason for purchasing clothes in Dongdaemun Market was to buy various clothing products. Comparing these reasons among different groups showed that there was a significant discrepancy in terms of trend design and copy design, in which wholesale consumers had shown a higher degree than retail consumers; c) and the preference for outsourced products of Dongdaemun brands was negative in both wholesale consumers (71.05%) and retail consumers (83.54%), as they both prefer clothes manufactured in Korea. Both groups selected the expensive price as the biggest disadvantage of Korean products, and picked design as the biggest strength of the outsourced clothes. Furthennore, both wholesale consumers (63.16%) and retail consumers (74.68%) selected Italy as the most preferred country for outsourcing clothing production. in which their reason had been their expectation for good product quality. The least preferred country for both wholesale (47.37%) and retail (50.63%) consumers was China, a country which they expected poor product quality.

• Korean journal of applied entomology
• /
• v.18 no.1 s.38
• /
• pp.55-61
• /
• 1979

Since rice high yielding practices with blast resistant varieties induced severe and earlier infestation of sheath blight recently, it is strongly suggested to spray at least 10 days earlier than the present recommendation and more than 2 sprays from early July to early August seems to be essential for the efficient control of sheath blight in the future. Among organo-arsenic fungicides, MAFe (Neo Asozin) is known as the most effective and economic as well as with the advantages of free phytotoxicity and safe residure on rice, and applications of the mixed formulation with other fungicide and insecticide is suitable for the one-hit control of rice diseases and insect pests in connection with cooperative mass control system. Present level of arsenic $(As_2O_3)$ residue in .ice is summarized as 0.2ppm to 0.65 ppm in highest average, and there are more possibilities of extensive MAFe fungicide uses for the efficient and economic control of this disease. During the past few years, the acreage of sheath blight control has been extended several times while the increase of the fungicides used for sheath blight showing about 10 times in quantity and mort than 15 times in amount, and also the fungicide cost estimated for the control is differ from 1 to 12 billion 1on by the use of MAFe or antibiotic fungicide in a year.

• Journal of Korean Society of Forest Science
• /
• v.105 no.2
• /
• pp.231-237
• /
• 2016

This research was conducted in order to examine whether the Woodgrab short-wood logging method, most widely used logging method in Korea, is more favorable than other logging methods in terms of productivity and profitability. For the comparative purposes, whole-tree logging methods with cable yarding system using a swing yarder and a tower yarder were evaluated. The productivity and the profitability of the logging operations by the machine types on a L. kaempferi stand were estimated by simulating logging processes based on bucking patterns and the results were compared. As a result, the Woodgrab short-wood logging system showed the most favorable results in terms of skidding productivity and operating cost. On the contrary, the system was the least profitable among the three logging methods. Main reason is that while the system may be beneficial in terms of operation productivity, it is restricted to produce only short logs mainly for low quality raw materials such as pulp, bolts, etc. which are sold at cheap prices.

• Biomedical Science Letters
• /
• v.10 no.4
• /
• pp.391-395
• /
• 2004

The demand for the production of gene-defective mice from embryonic stem (ES) cells is increasing to clarify decisive gene function in vivo. Although blastocyst injection is widely used to generate ES cell-mediated knockout mice, coculture method has been alternatively used because of several advantages, such as low cost and simple procedure. Thus, this experiment was designed to demonstrate the feasibility of the coculture method using J1 ES cells, which are known to be efficient for blastocyst injection. Eight-cell embryos were harvested from 2.5 days post-coitum (dpc), denuded with acid tyrode's solution, and transferred onto trypsinized J1 ES cells. Aggregation was carried out following two typical methods, which are simple coculture method and aggregation in groove prepared by aggregation needle. Successfully aggregated-embryos were developed to blastocysts for 24 h and transferred into uterus of pseudo-pregnant foster mother. Chimeric offspring was judged by coat pigmentation. In this study, we could obtain chimeric mice from all the two aggregation methods, but the chimera production efficiencies in coculture using groove were three times higher at least than those in the other group. In conclusion, these observations suggest that coculture method should be available for production of knockout mice from J1 ES cells. Presently, the germ-line transmission rates of the chimeras produced from the two methods are under investigation.

• The Korean Society of Law and Medicine
• /
• v.18 no.2
• /
• pp.47-73
• /
• 2017

Medical certificate is a document to demonstrate a patient's health status, made up and signed by a physician, dentist, or oriental physician who attended the patient. It serves as an evidence in many official process including civil or criminal law suit, especially for one's personal injury. The Korean legal system also acknowledges and protects the evidentiary function of medical certificate by mandating physicians etc. to issue medical certificate in good faith and only when they personally attended the patient, and by criminally punishing them when they do not comply with these legal requirements. There are some reasons, however, that medical certificates often do not reflect the true health status of the patient: When physicians attend the patient and collect information regarding the health status of the patient, their priority is and should be the most cost-effective way to meet the health needs of the patient. It does not necessarily correspond to the accurate examination of the health status of the patient. Even when the patient's report on the history of the illness or the injury seems suspicious, physicians might have to avoid disproving it because that kind of attitude might harm the rapport between the physician and the patient. All these can distort the perception of the physicians and this distortion can be reproduced in the medical certificate they made up. Some of these problems might be resolved or at least enhanced by introducing new form of medical certificate which would guide physicians to reveal the nature, factual and theoretical grounds, and the limit of their findings more accurately. Others, however, would not be able to address, because it stems from the conflict between the physician's primary duty, duty to be loyal to the patient's life and health, and his secondary duty to serve as a public or neutral witness on the health status of the patient, and when both values or duties conflict with each other, they should choose the duty to the patient sacrificing the duty to the public or the court.